What to Bring for the Subject 1 Exam?

2 Answers
VonMaddox
07/25/25 6:25am
You only need to bring your ID card for the exam. The admission ticket and other documents are handled by the driving school, which will distribute them during the exam. Electronic IDs are not accepted for the exam. If you don't have an ID card, you can apply for a temporary ID, which holds the same validity as a regular ID card. The "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" clearly state that you can take the Subject 1 exam twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the Subject 1 exam ends, and you can only reschedule after ten days. The Subject 1 exam consists of 100 questions, including single-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the session. The Subject 1 exam is computer-based and lasts 45 minutes. Subject 1 exam content includes: regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Exam precautions for Subject 1: Pay attention to attire—no slippers allowed. Electronic devices and bags are prohibited in the exam hall. Bring your ID card and queue to enter the waiting area. Observe the instructions and procedures on the large screen before entering the exam hall, and store personal belongings in lockers. Upon entering, verify your identity at the assigned station and begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect and sign your score report—unsigned reports are invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you skip the retake or fail it, the exam ends, and you must reschedule. For Subject 2 and Subject 3, there are only five exam attempts. These exams can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 covers traffic safety laws, regulations, and related knowledge. Subject 2 tests field driving skills. Subject 3 includes two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per Ministry of Public Security Order No. 123) does not include "Subject 4."
Was this review help?
7
0
Share
SanAugust
08/10/25 6:09pm
For the subject one test, you must bring your original ID card, as it's the most basic requirement—without it, you won't even be allowed into the test center. Also, don’t forget your admission ticket, which should be printed in advance from the driving test platform to avoid last-minute panic. Prepare a photo as well, typically a one-inch blue-background ID photo, and bring an extra copy just in case. I recommend bringing a pen and some cash in case you need to fill out forms or handle additional materials. On the test day, wear loose clothing and arrive at the test center half an hour early to familiarize yourself with the environment and avoid traffic delays. Do not bring your phone into the exam area—just store it in your bag. Stay calm; review thoroughly by practicing questions beforehand, and during the test, read each question carefully before selecting your answer—don’t rush. The process is straightforward, but missing even one item can cause trouble, so check your list and get everything done in one go.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

Where is the OBD interface of Haima M3?

The OBD interface of Haima M3 is located behind the storage box on the driver's side. Here are detailed introductions about the OBD interface of Haima M3: 1. The OBD function is the same for all vehicles. It is a mandatory configuration installed by the state to prevent vehicle exhaust from exceeding standards and polluting the environment, and it is not very useful for car owners. 2. OBD is the abbreviation of On-Board Diagnostics, which is translated into Chinese as "On-Board Automatic Diagnostic System". This system will monitor whether the vehicle's exhaust exceeds the standard at any time based on the engine's operating conditions, and will issue a warning immediately if it exceeds the standard.
19
1
Share

Is 'ON' for On or Off?

ON means the power is turned on, indicating the active state, while OFF means the power is turned off. Below are specific introductions to common car buttons: 1. MUTE button: MUTE can mute the sound with one press. 2. SEL key menu selection confirmation button: The SEL key is generally located on the multifunction steering wheel. The OK key has the same function as the SEL key, but some cars use SEL while others use OK. 3. VOL+/- are volume adjustment buttons: VOL is the abbreviation of the word 'volume', which can adjust the volume of the car audio.
7
4
Share

What does the Geely Binyue lim mean?

Geely Binyue lim button means to turn on the speed limit function, that is to say, after turning on this function, the maximum speed can only reach the set speed, and even if you step on the accelerator again, the speed will not increase. How to start lim: When the vehicle is stationary, press the lim button once, and the default speed limit is 30Km/h. The specific meaning of lim: Generally, when the vehicle is stationary, pressing this button will default to a speed limit of 30km/h; when driving, pressing this button will set the current speed value as the speed limit trigger point. Press to turn on, press again to turn off.
6
0
Share

How Many Kilometers Should You Drive for the First Maintenance?

New car first maintenance is required at 3 months or 5,000 kilometers, whichever comes first. Before the first maintenance, pay attention to the following points: 1. Book in advance: It is best to make an appointment with the 4S store in advance; otherwise, you may encounter situations where there are no available service bays or have to wait in line for a long time. 2. Bring necessary documents: When going for the first maintenance, bring essential items such as the maintenance manual and vehicle registration. If unsure about what to bring, make sure to ask during the appointment. 3. Record issues promptly: If you encounter any faults or questions while driving, note them down and inform the staff during the first maintenance registration so that the technician can check all issues during the maintenance.
12
3
Share

What transmission does the Geely Vision use?

Geely Vision is equipped with either a manual or an automatic transmission depending on the model configuration. Below are the detailed specifications of the transmissions: 1. The 4-speed automatic transmission in the 2016 model is independently developed by Geely, demonstrating excellent durability and smooth performance in tests. This transmission has also been purchased by other domestic automakers, positioning Geely as a leader in this field. 2. The number of gears in an automatic transmission is not the sole determinant of its quality; the shift logic is equally important. Shift logic refers to the timing of gear changes set by the transmission manufacturer, which is influenced by factors such as engine speed, throttle position, and vehicle speed. A well-designed automatic transmission with responsive shifting and rational logic can achieve superior fuel efficiency.
1
2
Share

How to Replace the Power Steering Pump on a Corolla?

Replacing the power steering pump on a Corolla involves the following steps: 1. Use a tool to remove the spring clip at the bottom. There is a small hole on the housing—insert the tool into the hole and push firmly. 2. After removing the spring clip, tap off the rear cover and remove the small retaining ring on the shaft. 3. Once the retaining ring is removed, the pump shaft and pulley can be pulled out together. 4. Next, remove the oil outlet screw in sequence, and the internal pressure valve assembly can also be taken out. 5. Installation follows the reverse order of removal. The power steering system primarily assists the driver in adjusting the vehicle's direction, reducing the effort required to turn the steering wheel. Of course, power steering also plays a role in the safety and fuel efficiency of the vehicle.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.