What tires should be used for Geely Boyue?

What are the reasons for the weak acceleration of Chery Tiggo 3x?

Introduction to the reasons for the weak acceleration of Chery Tiggo 3X: Carbon deposits: Carbon deposits on the valves, idle speed motor, intake tract, combustion chamber, and spark plugs may cause engine stalling during idling. Driving in congested roads: Frequent acceleration and deceleration alternation when driving in congested roads for a long time may lead to weak acceleration when driving again. Poor fuel quality: The use of poor-quality gasoline will affect the gasoline filter and fuel line, which may lead to poor fuel supply and thus weak acceleration; it will also affect the service life of the three-way catalytic converter in the exhaust system. If the three-way catalytic converter is blocked, it will directly affect the acceleration performance of the vehicle, and also lead to increased fuel consumption, resulting in the phenomenon of weak acceleration.

3

0

Share

What is the method to reset the maintenance light on Chery Tiggo5?

Hold down the black knob on the dashboard and turn the ignition key three times to reset it. Introduction to the maintenance light: The car maintenance light is an indicator that illuminates when the vehicle reaches the scheduled maintenance mileage within the preset maintenance cycle, prompting the need for vehicle maintenance. As driving time increases, the wear and tear on internal components of the vehicle gradually intensifies. To ensure normal operation, manufacturers have installed reminder indicator lights. Upon reaching a certain mileage, the owner should promptly replace the components. After successful replacement, it is also necessary to reset the car's maintenance light to zero. Function of the maintenance light: The purpose of these lights is to record the mileage usage of important components, much like a timer in a sprint race, serving as a reminder for both the vehicle owner and automotive maintenance personnel. However, if the owner replaces the relevant components but fails to reset the maintenance light, it generally does not affect the vehicle's performance but can cause unnecessary trouble for the next component replacement—specifically, the inability to accurately track the usage time of the new components.

7

3

Share

What is the maintenance interval for the Exeed?

The maintenance interval varies depending on the type of engine oil. Mineral oil (maintenance interval: 5000KM), semi-synthetic oil (maintenance interval: 7500KM), and full synthetic oil (maintenance interval: 10000KM). Mineral oil: It is based on mineral oil refined from petroleum, with additives added during manufacturing. It is relatively inexpensive and provides basic protection. Semi-synthetic oil: It is made from semi-synthetic base oil, specifically: lubricants formulated from international Group III base oils. It is a product purified from mineral oil through hydrocracking technology. It is a mixture of mineral oil and full synthetic oil in a 4:6 ratio. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil. It is an ideal transitional product from mineral oil to synthetic oil. Full synthetic oil: To obtain higher-performance engine oil, humans have chemically synthesized various types of engine oil, which is known as chemically synthesized engine oil, or simply synthetic oil.

12

0

Share

How many kilometers should the brake pads of a Prado be replaced?

Generally speaking, the replacement interval for front brake pads is 30,000 kilometers, while the rear brake pads should be replaced every 60,000 kilometers. Visual Inspection Method: A new brake pad's thickness (excluding the steel backing plate) is typically around 15~20mm. When visual inspection shows that the brake pad thickness has reduced to approximately one-third of its original thickness (about 5mm), the owner should increase self-inspection frequency and prepare for replacement. Immediate replacement is usually required when the thickness is less than 3mm. Each brake pad has raised indicators on both sides, with a thickness of about 2-3mm, which represents the minimum replacement limit. If the brake pad thickness aligns with these indicators, replacement is mandatory. Many vehicle models now provide dashboard warnings when brake pads are too thin, making self-inspection more convenient. Listening for Sounds: If a metallic scraping sound (like iron rubbing against iron) occurs during light braking, the brake pads must be replaced immediately. This indicates that the brake pad's limit indicators are directly grinding against the brake disc, meaning the pads have exceeded their wear limit. In such cases, the brake disc should also be inspected during replacement. Often, the disc is already damaged when this sound appears, and simply replacing the brake pads may not eliminate the noise. Severe cases may require disc replacement.

12

4

Share

What Causes Intermittent Operation of Car Air Conditioning?

Multiple reasons are as follows: 1. The air filter in the vehicle's air conditioning system is excessively dirty and needs replacement. 2. The air conditioning compressor lacks refrigerant, causing abnormal operation. 3. The air conditioning control panel is damaged. 4. The vehicle is equipped with automatic air conditioning, which shuts off the system when the set temperature is reached. There are two operation modes for the vehicle's air conditioning system: 1. First mode: Press the AC switch directly to activate the system, then adjust settings via the control panel to achieve desired cooling. 2. Second mode: Press the AUTO button to enable automatic air conditioning, after which only temperature adjustment is needed for normal operation without interference.

3

4

Share

Can You Stop During Subject 2 Driving Test?

No, stopping midway is not allowed in any of the Subject 2 test items. However, sometimes if the clutch is fully depressed for more than 5 seconds, the system may mistakenly judge it as a mid-test stop. But in the pole test, there are specific rules: pauses for gear shifting or changing direction during the entire reverse parking and garage shifting process will not be counted as "mid-test stops." Additional Information: Insufficient mastery of clutch control often leads to inconsistent speeds or sudden stops. The test site differs slightly from the training ground. When turning the steering wheel to full lock during vehicle movement, the front wheels' angled position creates significant resistance, which may cause the vehicle to stop briefly.

18

4

Share

What tires should be used for Geely Boyue?

What are the reasons for the weak acceleration of Chery Tiggo 3x?

What is the method to reset the maintenance light on Chery Tiggo5?

What is the maintenance interval for the Exeed?

How many kilometers should the brake pads of a Prado be replaced?

What Causes Intermittent Operation of Car Air Conditioning?

Can You Stop During Subject 2 Driving Test?

What is the break-in period for the Haval Chitu?

What is the oil capacity of the Enclave?

Where is the trunk keyhole of the Bora?

Can the Volkswagen Lavida be started via mobile phone?