What tires does the Trumpchi GS4 use?

1 Answers
VonHadley
07/29/25 8:05pm
Trumpchi GS4 is equipped with Michelin PRImACY3ST tires in the size of 215/55R18, a set of tires that performs excellently in both dry and wet grip conditions. PRImACY3ST is a representative of Michelin's quiet and comfortable tire product line. Here is an introduction to the Primacy3ST tires: 1. The tread pattern adopts a variable pitch block design. Four longitudinal grooves divide the tread pattern into five blocks, with the three middle blocks being identical. All the tread blocks use a variable pitch design, which can disrupt noise during tire operation, playing a role in noise reduction. 2. It incorporates Michelin's "FLEXMAX" technology, combining highly flexible tread rubber with a tread block chamfer design. The highly flexible tread rubber allows the tire to better conform to the road surface, providing stronger grip, while the tread width chamfer design maximizes the tire's contact area, further enhancing the tire's grip.
Was this review help?
20
5
Share
More Forum Discussions

Can parallel imported cars be serviced at 4S stores?

Parallel imported cars can be repaired at designated 4S stores through insurance companies. Here is some information about parallel imported cars: 1. The warranty for parallel imported cars is underwritten by a third party, which is an insurance policy purchased separately by the buyer at the time of purchase. When problems arise with the vehicle, the third-party platform can provide basic maintenance, professional repairs, and comprehensive repair services. 2. Currently, most parallel import car dealers do not actively provide after-sales services and insurance; only a very few dealers have improved these services. At present, parallel imported cars are provided with three guarantees and after-sales services by the dealers, or insurance companies are introduced to provide three guarantees and after-sales services.
20
0
Share

How long should the car warm up in winter?

Generally, you can start driving within 30 seconds to one minute after starting the vehicle, but it's important to maintain low-speed driving and keep the engine speed around 2000 RPM. Here are some winter car usage tips: 1. Control the interior temperature: Due to the significant temperature difference between indoors and outdoors in winter, it's necessary to regulate the heating properly. Avoid setting the heater too high, as excessively warm temperatures can cause drowsiness in drivers. Keeping the temperature at a comfortable level helps maintain alertness and reduces distractions. 2. Park in garages when possible and perform regular checks/maintenance: In low winter temperatures, special attention should be paid when parking vehicles, particularly regarding battery protection. Cars may experience starting difficulties in cold weather, so try to park in underground garages when possible. Perform regular maintenance checks on various fluids and the battery condition.
17
0
Share

What Causes the Noise When Releasing the Brake?

The reasons for noise when releasing the brake are as follows: 1. False fault: This noise is mainly caused by the driver releasing the brake too slowly when starting, which is a common issue for many automatic transmission car owners. When the brake pedal is gradually released, the engine is already engaged, but since the brake isn't fully disengaged, the moving wheels are restrained by the braking system, resulting in noise. 2. True fault: The brake disc and brake pads are stuck together due to rust, causing noise. This can be fixed by applying butter or special lubricating oil at the connection between the brake pads and the brake caliper at a repair shop.
15
5
Share

Where is the Ambient Temperature Sensor Located?

The ambient temperature sensor is typically installed on the front bumper mounting bracket and is a thermistor. Here is some information about temperature sensors: 1. A temperature sensor (temperature-transducer) refers to a device that can sense temperature and convert it into a usable output signal. 2. The temperature sensor is the core component of temperature measurement instruments and comes in various types: according to the measurement method, they can be divided into contact and non-contact categories, and based on sensor material and electronic component characteristics, they are classified into thermal resistors and thermocouples.
2
1
Share

What are the reasons for a car suddenly failing to start?

The reasons for a car suddenly failing to start are as follows: 1. The battery is dead. Sometimes, when you find that the car cannot start normally, it is likely that the trunk was not completely closed, causing the trunk light to stay on and drain the battery. 2. The spark plug cannot ignite. The spark plug itself is easily damaged, and short circuits in the high-voltage lines can cause the spark plug to fail to ignite. Another reason is that poor-quality spark plugs can also prevent the car from starting normally. 3. Starting circuit failure. When starting, there is only a slight "click" sound and no further response, which is caused by a stuck starting relay. In this case, simply pressing the tail of the electromagnet to force it forward can connect the starting circuit, thereby allowing the engine to start.
13
1
Share

What is the emission standard for a 2008 car?

Most cars from 2008 comply with the China IV emission standard. The simplest and most direct way to check a car's emission standard is to look at the vehicle's environmental protection label, which has a clear mark on the back. More details are as follows: 1. China IV is a vehicle exhaust emission standard, referring to the National Phase IV Motor Vehicle Pollutant Emission Standard. The main pollutants from vehicle emissions include HC (Hydrocarbons), NOx (Nitrogen Oxides), CO (Carbon Monoxide), and PM (Particulate Matter). 2. Technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices can be applied to control and reduce vehicle emissions to levels below the specified standards. Methods to check a car's emission standard are as follows: 1. The simplest and most direct method is to check the vehicle's environmental protection label, which has a clear mark on the back. 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiry. 3. Take the vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. Check the vehicle's factory certificate, but generally, this certificate is kept at the vehicle management office. Therefore, it is recommended to make a copy when purchasing the car for future reference. 5. Make a rough estimate based on the year the car was registered: 1. Most cars registered after 2008 are China IV. 2. Cars registered in 2007 could be either China III or China IV. 3. Cars registered before 2007 are mostly below China IV, i.e., China II or China III. 4. Cars registered before 2005 are mostly China II.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.