What tires does the Trumpchi GA6 use?

1 Answers
Walter
07/29/25 1:05pm
The Trumpchi GA6 uses Michelin tires. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. When mounted on metal rims, they support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure driving performance. The Trumpchi GA6 is a mid-sized 4-door 5-seater sedan. Taking the 2019 Trumpchi GA6 Automatic Elite version as an example, its body dimensions are: length 4891mm, width 1850mm, height 1505mm, with a wheelbase of 2815mm. The 2019 Trumpchi GA6 Automatic Elite version is equipped with a 1.5L turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 124 kW and a maximum torque of 265 N·m.
Was this review help?
6
3
Share
More Forum Discussions

Should Maserati Use 95 or 98 Octane Gasoline?

Maserati vehicles require gasoline with an octane rating of 95 or higher, so both 95 and 98 octane gasoline can be used for Maserati cars. Different octane ratings indicate varying levels of octane values—the higher the rating, the higher the octane value. In addition to checking the recommended gasoline grade in the vehicle's manual, Maserati owners can also find this information on the fuel tank cap, which typically specifies the suitable octane rating. Generally, the appropriate gasoline grade can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92 octane gasoline, those between 10.0-11.5 should use 95 octane, and higher compression ratios require 98 octane. However, with the advent of new technologies, compression ratio alone is no longer the sole determinant of gasoline grade, as high-compression engines can now be tuned to use lower-octane fuel. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also influence the choice. Generally, higher-octane gasoline has a higher octane value and better anti-knock properties. For example, 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong octane rating in a Maserati is not a major issue—simply switch back to the correct grade after the tank is empty. However, prolonged use of the wrong gasoline can have the following effects: Using higher-octane fuel in a vehicle designed for lower octane will not cause damage, but the increased octane value alters the fuel's ignition point, leading to delayed combustion. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using lower-octane fuel in a high-octane vehicle can cause engine knocking. Since the octane value is significantly lower, the fuel may ignite prematurely during the compression stroke before the spark plug fires. This premature combustion creates resistance during the upward stroke, causing unstable engine operation. Mild knocking may only increase noise without noticeable engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders. In extreme cases, it can even lead to cylinder scoring.
19
5
Share

Can I choose not to use ETC after installation?

It is acceptable to have ETC installed but not use it. According to the State Council regulations, vehicles without ETC or not using ETC in 2020 cannot enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, requiring payment through manual channels. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at the toll station. Computer networking technology is used for backend settlement processing with banks, enabling vehicles to pass through highway or bridge toll stations without stopping while paying the required fees. ETC charging principle: For ETC vehicles, the toll amount is rounded according to the "round down below 0.5" rule (i.e., amounts with a decimal less than 0.5 are rounded down, while amounts with a decimal equal to or greater than 0.5 remain unchanged). Then, a 5% discount is applied, followed by rounding to the nearest cent. MTC vehicles still follow the "round to the nearest yuan" rule. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost-saving: Reduces vehicle wear and fuel consumption by minimizing frequent starts and brakes, and users can enjoy a 5% toll discount; Improved efficiency: Theoretically, ETC lanes can increase vehicle passing efficiency by 2-3 times, making traditional ETC more advanced, faster, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards will be basically realized in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also set a clear target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC adoption rate for passenger vehicles, future efforts will include promoting ETC for trucks and exploring deep integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for car owners, meaning more application scenarios will support ETC usage.
4
1
Share

What to Do When the Car Engine Warning Light Comes On?

When the engine warning light comes on, you can follow these steps: First, check if the engine is running normally and whether there are issues like shaking or emitting black smoke. If any of these problems exist, try not to start the engine again. Especially note that if the light is red, do not start the engine under any circumstances. If the engine can be started, turn it off for 5-10 minutes. Then, without pressing the brake, press the start button once or turn the car key halfway to the 'on' position without depressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the warning light on the dashboard turns off. If the warning light does not turn off, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs. There are mainly seven reasons why the engine warning light may come on: Sensor failure: Sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors may be damaged, have poor contact, or experience signal interruption. When the car's ECU cannot accurately obtain engine data, the engine warning light will come on. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the warning light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will come on as a warning. Issues like spark plug failure, ignition coil failure, fuel pump failure, or clogged fuel lines can cause poor combustion. Turbocharger issues: Problems with the intake boost pipeline or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms like oil leaks, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: If the car's intake system has problems, it may lead to clogged engine pipelines, and in severe cases, the engine warning light will come on. A dirty air filter that is not cleaned regularly can cause intake issues. Exhaust issues: Exhaust system failures can also trigger the engine warning light. Common causes include rear oxygen sensor failure, catalytic converter issues, or faults in the exhaust camshaft and bearings. The catalytic converter is the most frequent culprit, often damaged by using leaded gasoline, lead or silicon-based lubricant additives, physical impact, or fuel system failures. Anti-theft system failure: If the car's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine's electronic controller, the anti-theft system can prevent the engine from operating normally, and the engine warning light will come on.
13
0
Share

Are Cadillac Maintenance Costs High?

Cadillac maintenance costs are high. As a second-tier luxury brand model, Cadillac's maintenance expenses are relatively high. The 2.0t engine used in this vehicle requires full synthetic oil for maintenance. The price of a routine maintenance service varies slightly depending on the oil brand selected by each owner. As an American luxury brand model, Cadillac has relatively high pricing itself, and this vehicle also has higher post-sales maintenance costs.
5
0
Share

Camry Steering Wheel Abnormal Noise?

Abnormal noise from the steering wheel: Steering wheel abnormal noise is one of the relatively common car faults. It is believed that most car owners have experienced it during normal use, typically occurring when turning the steering wheel. If the noise comes from inside the steering wheel, the issue is most likely caused by the clock spring inside. To address this, remove the steering wheel clock spring and apply some grease to see if the noise persists. If it still makes noise, replace the clock spring as it may be damaged. Be gentle when removing the steering wheel, or disconnect the airbag fuse to prevent the airbag from deploying.
12
3
Share

What are the repair methods for Cadillac screen malfunction?

Cadillac screen malfunction reset methods are as follows: 1. Check if the fuse is short-circuited or blown, use the electronic car key to unlock. 2. Go to a 4S shop for professional repair. Below is an introduction to the functions of the Cadillac central control screen: 1. The central console LCD screen is an LCD display located in the middle of the central console, which can display basic information such as time, temperature, date, and audio. 2. It generally serves as an information display device for multimedia control systems, electronic navigation systems, and reverse assist systems, and can also function as a display screen for in-car TV and DVD.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.