What tires does the Toyota 86 use?

Why Does Water Drip from the Car Chassis?

The reasons for water dripping from the car chassis are: 1. Exhaust pipe dripping: The combustible mixture enters the engine cylinder for combustion, producing carbon dioxide and water. Under the airflow generated by the high-speed operation of the car engine, liquid water is carried out of the exhaust pipe along with the exhaust gas, resulting in water dripping from the exhaust pipe and causing water to appear on the car chassis. 2. Body drainage holes dripping: To prevent rainwater from accumulating in these areas and causing rust, drainage holes are designed in some parts of the body and chassis to allow rainwater and melted snow to drain out as quickly as possible. Drainage holes are usually located on both sides of the windshield wipers, and rainwater near the front windshield flows out through the deflector. Door drainage holes are generally hidden under the door seal at the bottom of the door panel, mainly to drain rainwater that seeps into the door from the gaps around the windows, which can also cause water to appear on the car chassis. 3. Air conditioning drain pipe dripping: In summer, the use of air conditioning is very frequent. When the air conditioning is working, condensation water is generated in the evaporator of the air conditioning system. Normally, this condensation water is drained out of the car through a dedicated drain pipe. If the drain pipe is blocked or bent, the water cannot flow out, leading to water appearing on the car chassis.

7

4

Share

What does OBD mean on a car dashboard?

OBD stands for On-Board Diagnostics in English, which means the onboard automatic diagnostic system in Chinese. The OBD system continuously monitors the engine's operating conditions to check whether the vehicle's exhaust exceeds the standard. If it exceeds the standard, a warning will be issued immediately. When a system failure occurs, the malfunction indicator lamp or check engine warning light will illuminate, and the powertrain control module will store the fault information in the memory. Through a certain procedure, the fault code can be read from the PCM. Based on the prompt of the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. OBD monitors the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, and other systems and components in real-time. Then, through different emission-related component information, it connects to the ECU. When an emission fault occurs, the ECU records the fault information and related codes and issues a warning through the malfunction indicator lamp to inform the driver. The ECU ensures access to and processing of fault information through a standard data interface.

7

1

Share

How to turn on the front fog lights of the Roewe i6?

Method to turn on the front fog lights of the Roewe i6: 1. Turn on the vehicle's parking lights. 2. The combination switch has a front fog light symbol. When you rotate the button marked with the fog light signal to the ON position, the front fog lights will turn on. Then, rotate the button downward to the rear fog light position to simultaneously turn on both front and rear fog lights. If you are unsure whether the fog lights are on, you can stop the vehicle to check. Both front and rear fog lights are located below the vehicle's normal lights. 3. You can also use a button to turn on the front and rear fog lights. There is a button marked with the fog light symbol near the instrument panel. After turning on the lights, press the front fog light button to activate the front fog lights.

19

1

Share

How to Reset the Maintenance Reminder on a Volkswagen Magotan?

Here are the steps to reset the maintenance reminder on a Volkswagen Magotan: 1. First, press and hold the small wrench button on the dashboard with your left hand, then turn on the ignition with your right hand. 2. Next, release the small wrench button with your left hand and press the minute adjustment button on the time setting knob. Then, turn off the ignition and release the time button with your left hand. 3. Finally, start the engine, and the maintenance reminder will disappear.

14

3

Share

Which Cars Meet China 6 Emission Standards?

Currently, all vehicles sold in China comply with the China 6 emission standards. The "China 6 Standard" is divided into two phases: "China 6a" and "China 6b," which were uniformly implemented nationwide on July 1, 2020, and July 1, 2023, respectively. According to the "Announcement on Adjusting the Implementation Requirements for the China 6 Emission Standards for Light-Duty Vehicles," the transition period for selling China 5 vehicles in certain cities expired on December 31, 2020. Although China 5 vehicles are not yet restricted from driving, they are completely banned from sale and cannot be registered. Used China 5 vehicles can still be transferred, but there are time limits, which vary by region. For example, in Guangdong, according to regulations, in-use China 5 emission standard light-duty vehicles within the Pearl River Delta region could be mutually transferred before June 30, 2023. Methods to Check Vehicle Emission Standards: First, you need to know the vehicle model number of the car you want to check. The vehicle's model number is usually indicated on the nameplate. Visit the Motor Vehicle Environmental Protection Website, enter the fuzzy conditions (vehicle model number) in the input box on the webpage, then enter the correct verification code, and click "Query" to find the relevant information about the vehicle, including its emission standard.

5

Share

What engine is used in the Fengguang 580pro?

The Fengguang 580pro is equipped with two engines. These are a low-power version of the 1.5-liter turbocharged engine and a high-power version of the 1.5-liter turbocharged engine. 1. The low-power version of the 1.5-liter turbocharged engine has a maximum power of 110 kW, a maximum torque of 220 Nm, a maximum power speed of 5,600 rpm, and a maximum torque speed range of 1,800 to 4,000 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. It is paired with a 5-speed manual transmission. 2. The high-power version of the 1.5-liter turbocharged engine has a maximum power of 132 kW, a maximum torque of 270 Nm, a maximum power speed of 6,000 rpm, and a maximum torque speed range of 1,500 to 4,000 rpm. This engine is equipped with direct fuel injection technology and uses an aluminum cylinder head and cast iron cylinder block. It is paired with a CVT transmission.

2

5

Share

What tires does the Toyota 86 use?

Why Does Water Drip from the Car Chassis?

What does OBD mean on a car dashboard?

How to turn on the front fog lights of the Roewe i6?

How to Reset the Maintenance Reminder on a Volkswagen Magotan?

Which Cars Meet China 6 Emission Standards?

What engine is used in the Fengguang 580pro?

What to Do When the Car Interior Fogs Up on Rainy Days?

Can Windshield Washer Fluid Freeze and Crack the Reservoir?

How long is a study session for Subject 3?

Can a Newly Purchased Car Be Driven on the Highway?