What tires does the Tiguan use?

What to Do When Car Wipers Do Not Reset?

If the car wipers do not reset, you can troubleshoot the issue by following these steps: 1. Prepare the necessary tools and materials: lubricating oil, screwdriver, wrench, and analyze the working principle of the wiper and the non-reset situation. 2. Check if the wiper is stuck or has an open circuit? After confirming that the motor is functioning properly, the next step is to check other potential issues besides the motor, such as whether the wiper has an open circuit or is stuck. These are relatively simple checks. 3. Check if the hardware lacks lubrication, causing excessive friction? If none of the above situations occur, check if the hardware lacks lubrication, leading to excessive friction, preventing the spring from automatically returning to its original position. Then, apply lubricating oil to the surface of the card.

18

2

Share

What does ESP mean in a car?

ESP stands for Electronic Stability Program. Here is relevant information about the function of ESP: 1. When the vehicle is on a road with low friction, tire slippage can cause the direction and speed of the vehicle to be uncontrollable by the driver. At this point, ESP can intervene by braking the non-slipping wheels, helping the driver regain control of the vehicle to ensure driving safety. 2. When understeer occurs, ESP will control the braking of a specific rear wheel. For example, if there is understeer to the right, it will brake the right rear wheel; if there is understeer to the left, it will brake the left rear wheel. 3. Similarly, when oversteer occurs, ESP will control the braking of a specific front wheel. For oversteer to the right, it will brake the left front wheel; for oversteer to the left, it will brake the right front wheel. On icy roads, if the vehicle skids sideways, ESP will also control the corresponding wheel braking to maintain stability.

12

0

Share

What is the optimal RPM for shifting gears in a car?

It is generally appropriate to shift gears when the car's RPM is in the range of 2000~2500. This range allows for better matching between the gear and the vehicle's power output, while also achieving fuel efficiency. Here is some additional information regarding RPM and gear shifting: 1. The shifting RPM can typically be chosen between 1500-2500rpm. If the goal is fuel economy, shifting around 1500-1800rpm is advisable. 2. For lower gears, it is acceptable to increase the shifting RPM to around 2000rpm. During the break-in period, it is best to reduce the shifting RPM. 3. If you want better performance in terms of power, shifting around 2000-2500rpm is recommended.

4

2

Share

What Causes the ABS Light to Illuminate When It Rains?

ABS light illumination can occur in various states, with different causes and solutions for each state. The details are as follows: State 1: ABS warning light remains constantly lit (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections between system wires or poor contact of the ABS relay, leading to system failure. Solution: Check wire connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. The ABS warning light turns off as the engine speed increases and voltage rises. The ABS system power supply voltage is too low, possibly due to poor wire contact or grounding issues. Solution: Check the battery's specific gravity, inspect the charging system, and examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light remains lit after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact of the ABS hydraulic valve body; poor contact of the ABS hydraulic valve body wire connector; ABS computer failure. Solution: Loosen and then retighten the grounding screw of the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact of the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage fully downward, then release the brake pedal to complete self-setting; replace the brake light switch if necessary. If the ABS warning light is on, it is advisable not to continue driving. An illuminated ABS light indicates a fault in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, preventing the driver from slowing down or adjusting the vehicle's trajectory, posing significant safety risks.

18

5

Share

What Are the Causes of Car Air Conditioning Not Cooling?

Car air conditioning not cooling can be caused by insufficient refrigerant, dirty condenser, damaged air conditioning compressor, throttle valve or expansion valve, aging or loose belt, or water in the pipeline. Here are specific methods to diagnose the causes of car air conditioning not cooling: 1. Insufficient refrigerant. Refrigerant loss is mainly due to leakage. If the car's air conditioning performance deteriorates after adding refrigerant for a period of time, it indicates a condenser leak, and the condenser needs to be replaced. Adding fluorescent dye to the refrigerant and inspecting with special glasses can reveal the leak point. In severe cases, oil stains can be observed on the condenser surface through the grille, indicating a leak. 2. Dirty condenser. If the air conditioning performance is poor in summer, but the system checks show no issues and the high and low pressures are normal, cleaning the radiator and condenser is necessary. Pollen or debris clogging the condenser can cause engine overheating or poor air conditioning performance. 3. Damaged air conditioning compressor, throttle valve, or expansion valve. The probability of compressor failure is relatively low. 4. Aging belt. An aging belt may slip during operation, leading to belt breakage, noise, loss of power assistance, or poor air conditioning performance. 5. Water in the pipeline. The car air conditioning system includes a dryer tank, which absorbs moisture from the refrigerant to prevent excessive moisture from reducing cooling capacity. When the desiccant in the dryer tank is saturated, moisture can no longer be filtered out. When the refrigerant passes through the expansion valve orifice, its pressure and temperature drop, causing freezing. This obstructs refrigerant flow, increases resistance, or completely blocks circulation, resulting in the air conditioning not cooling.

10

4

Share

What are the license plate codes for various regions in Fujian?

The first characters of license plate numbers for various cities in Fujian Province are as follows: 1. Min A - Fuzhou City, Fujian Province (excluding Pingtan County). 2. Min B - Putian City, Fujian Province. 3. Min C - Quanzhou City, Fujian Province. 4. Min D - Xiamen City, Fujian Province. 5. Min E - Zhangzhou City, Fujian Province. 6. Min F - Longyan City, Fujian Province. 7. Min G - Sanming City, Fujian Province. 8. Min H - Nanping City, Fujian Province. 9. Min J - Ningde City, Fujian Province. 10. Min K - Fujian Provincial System, Pingtan Comprehensive Experimental Zone, Fujian Province. Additional information: The first character of a license plate number is a Chinese character, representing the abbreviation of the province where the vehicle is registered. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered. Typically, 'A' represents the provincial capital city, 'B' represents the second-largest city in the province, and so on.

4

2

Share

What tires does the Tiguan use?

What to Do When Car Wipers Do Not Reset?

What does ESP mean in a car?

What is the optimal RPM for shifting gears in a car?

What Causes the ABS Light to Illuminate When It Rains?

What Are the Causes of Car Air Conditioning Not Cooling?

What are the license plate codes for various regions in Fujian?

How to Defog Car Windows in Winter?

What is the difference between AT transmission and AMT?

Should You Turn Off the Engine or Shift to P Gear First When Parking an Automatic Transmission Car?

What Causes a Car Compressor to Stop Working?