What tires does the Song Pro use?

What are the symptoms of insufficient right tire pressure?

Insufficient pressure in the right front tire can cause the vehicle to pull to the right while driving, accelerate wear on the right front tire, make steering adjustments difficult and laborious, and increase the risk of accidents. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Heavy steering wheel and tendency to drift, which are unfavorable for driving safety; Increased movement of various parts of the tire, causing abnormal heat due to excessive rolling; Reduced functionality of the cords and rubber, leading to delamination or cord breakage, excessive friction with the rim causing damage to the bead area, and abnormal wear; Multiplied friction between the tire and the ground, rapid rise in tire temperature, softening of the tire, and sharp decline in strength. High-speed driving may result in a blowout; Increased deformation of the tire body, prone to cracking on the sidewalls, and flexing movements leading to excessive heat, accelerating rubber aging, fatigue of the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.

9

0

Share

Should You Shift to Neutral in Hill Start Parking?

When performing hill start parking, you must engage the handbrake and shift to neutral. Then, slowly release the clutch to the semi-engaged point until the vehicle vibrates, and release the brake to complete the hill start. Hill Start Parking: Hill start parking and starting is a key assessment point in the Subject 2 of the driver's license test. Test requirements: The examinee must park the vehicle at a fixed position on a slope with a gradient greater than 10% and a length less than 30 meters, demonstrating coordinated control of steering, braking, and clutch. The purpose is to train drivers to accurately judge the vehicle's position and correctly use the brake, gear, and clutch to meet the needs of parking and starting on uphill sections. Precautions: Correctly master the contact point of the clutch; correctly time the release of the parking brake lever; correctly time and control the force applied to the accelerator pedal (throttle); when starting, avoid abruptly depressing the clutch pedal or accelerator pedal.

1

4

Share

Do Green License Plate Vehicles Require Annual Inspection?

Green license plate vehicles require annual inspection. Below is extended information regarding the annual inspection: Purpose of Annual Inspection: Vehicle annual inspection refers to a mandatory examination for every vehicle, equivalent to a physical check-up for the vehicle. For the annual inspection, the owner needs to bring the vehicle registration certificate and insurance policy (card). It is advisable to check in advance for any traffic violation records associated with the vehicle and address them promptly at the traffic police department if any exist. The primary purpose is to promptly eliminate potential safety hazards, encourage and enhance vehicle maintenance, and reduce the occurrence of traffic accidents. Concept of Annual Inspection: It is a mandatory examination for every vehicle (motor vehicle) that has obtained an official license plate and registration certificate, similar to an annual safety check-up conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." Mandatory Nature: Annual inspection is a legal requirement, meaning it is compulsory for every vehicle on the road. To facilitate vehicle owners, the government has introduced policies such as a six-year exemption from inspection for new vehicles that meet the requirements, eliminating the need for annual inspections during this period.

14

2

Share

What Does Motorcycle Displacement Represent?

Motorcycle displacement refers to the cylinder volume of the engine, measured in milliliters. The numerical value in a motorcycle's model name typically represents its displacement. Below is relevant information about displacement: 1. Definition: Displacement is a specialized term in hydraulic transmission, indicating the volume of fluid inhaled or discharged per stroke or cycle. 2. Displacement Classification: In China, passenger vehicle classifications are determined by displacement size. Micro cars have displacements ≤1.0L; compact cars range 1.0-1.6L; midsize cars range 1.6-2.5L; executive cars range 2.5-4.0L; luxury cars exceed 4.0L.

5

2

Share

What is the normal fuel consumption per 100 kilometers for a 1.5T SUV?

It is generally considered appropriate to have a fuel consumption around 8 liters per 100 kilometers. Relevant information about SUVs is as follows: 1. Introduction: SUV stands for Sport Utility Vehicle, which is different from ORV (Off-Road Vehicle) designed for rough terrains; the full name of SUV is sport-utility-vehicle or suburban-utility-vehicle, meaning a suburban utility vehicle. It combines the space functionality of a station wagon with the off-road capability of a pickup truck. 2. Features: SUVs are characterized by strong power, off-road capability, spacious comfort, and excellent cargo and passenger-carrying functions.

13

4

Share

Do Small Car Steering Ball Joints Need Lubrication?

Small car steering ball joints are generally sealed and cannot be disassembled, so they do not require lubrication. The ball joints already contain lubricant from the manufacturing process. Types of Ball Joints: Different suspension systems have different types of ball joints. MacPherson strut independent suspensions only have steering ball joints and lower support ball joints. Causes of Ball Joint Wear: Multi-link suspensions have more ball joints, including upper and lower control arm support ball joints. Steering ball joint wear can be detected by turning the steering wheel. The free play of the steering wheel is usually within 15 degrees. If it exceeds this range, have one person turn the steering wheel while another feels the steering ball joint. If the tie rod moves but the steering knuckle does not, this indicates significant wear on the steering ball joint, requiring replacement. For support ball joints and control arm ball joints, lift the vehicle so the wheels are off the ground. Have one person move the tire up and down to check for play. If the tire moves easily up and down, the ball joint has excessive play and needs replacement. The specific ball joint with severe wear can be identified by observing its movement. Regardless of the type, severely worn ball joints can cause noticeable wheel wobbling, jumping, or swaying at low speeds, along with unresponsive steering. Other issues include lack of lubrication and rust.

18

1

Share

What tires does the Song Pro use?

What are the symptoms of insufficient right tire pressure?

Should You Shift to Neutral in Hill Start Parking?

Do Green License Plate Vehicles Require Annual Inspection?

What Does Motorcycle Displacement Represent?

What is the normal fuel consumption per 100 kilometers for a 1.5T SUV?

Do Small Car Steering Ball Joints Need Lubrication?

Why Step on the Clutch When Braking?

Is there a difference in after-sales service between buying a car from an auto trader and a 4S store?

Can I drive with an electronic driver's license after passing Subject 4?

Should You Press the Clutch When Braking to Stop?