···
Log in / Register

What tires does the Roewe 360 use?

4 Answers
VonHenry
07/29/25 9:56pm

Roewe 360 uses MAXXIS tires. Below is the relevant introduction about Roewe 360 tires: 1. The tires are MAXXIS brand - focusing on durability, wet road performance, and low noise. 2. Size parameter specification: 205/55R16. Roewe 360 tires are circular elastic rubber products assembled on various vehicles or machinery that roll on the ground. Usually mounted on metal rims, they can support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. 3. When driving, tires endure various deformations, loads, forces, and high/low temperature effects. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.

Was this review help?
10
5
Share
LeJames
08/15/25 9:41pm

The original tires for the Roewe 360 typically use the 195/65 R15 specification. Having driven this car for many years, I often see brands like Maxxis or Goodyear, which are joint-venture brands. Tire choice greatly impacts daily driving, so I always check the door label or user manual for the exact model when buying a car. If the tire tread is severely worn or cracked, it’s best to replace them as soon as possible. I recommend checking tire pressure and wear every six months to ensure both driving safety and fuel efficiency. High-quality tires can reduce the risk of skidding during high-speed driving—I personally prefer quiet tires like Michelin, which, though more expensive, offer a smooth and comfortable ride. When encountering waterlogged roads, tires with good drainage performance are a must. It’s advisable to have a technician evaluate them during maintenance. When replacing tires, avoid choosing non-original specifications, as incorrect sizes can affect handling. Always refer to the owner’s manual before making a decision. For city driving, budget-friendly tires like Giti are quite durable and cost-effective with a long lifespan—just make sure not to exceed their service life.

Was this review help?
8
2
Share
Expand All
SavannahMarie
10/17/25 6:40am

I pay special attention to car tires. The standard configuration of the Roewe 360 mostly comes with 195/65 R15 tires, commonly from the Maxxis brand. As an owner, I've found that the original tires have average wear resistance, showing noticeable wear after just two to three years of city driving. When replacing them, I recommend opting for quiet models like Michelin or comfort-focused Goodyear to enhance the driving experience. Daily checks are simple: measure the tire pressure monthly and maintain it between 2.3-2.5 Bar to prevent premature aging. From a safety perspective, replace tires when the tread depth falls below 1.6mm to avoid hydroplaning in rainy conditions. I've also tested various brands and found that domestic Chaoyang tires offer good value for budget-conscious buyers. Before long-distance drives, always inspect tire conditions—small cracks or bulges can hide blowout risks. Don’t just focus on price when choosing tires; performance matching is more important. All-season models perform reliably during weather changes.

Was this review help?
20
3
Share
Expand All
LaBrady
11/30/25 7:24am

The Roewe 360 mostly uses 195/65 R15 tires, originally equipped with brands like Maxxis. I prefer switching to economical brands such as Giti, which are fuel-efficient, durable, and affordable. Tire condition directly affects daily expenses—premature wear means spending more on replacements. Regular checks can extend their lifespan; inspect tread depth and pressure every six months. When on a tight budget, consider domestic brands like Wanli, which offer decent performance but are slightly noisier. Safety first—ensure tires are damage-free before highway driving. Don’t rush into buying tires; compare prices from several shops before ordering.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Buick GL8 forum?

The fuel consumption of the Buick GL8 ranges between 8.4L-12.2L. As an MPV, the fuel efficiency of this vehicle is quite acceptable. Apart from the engine's own displacement, driving habits and road conditions also affect the car's fuel consumption. Here are some additional details: 1. In terms of power, this car is equipped with a 2.0T turbocharged engine, which has a maximum power of 191kw and a maximum torque of 350 Nm. Since this is an MPV model, the vehicle's own weight is relatively large, so the resulting fuel consumption is naturally higher. 2. There are many factors that affect a car's fuel consumption. The engine's displacement itself affects the fuel consumption, and later driving habits as well as road conditions also have a significant impact on fuel efficiency. 3. During the process of driving, if you frequently accelerate or decelerate sharply, the car's fuel consumption will increase by about 5-30%. This is a relatively normal phenomenon. If the car often travels on roads with poor conditions, the load on the engine will increase, requiring the engine to provide stronger power for the car, thus consuming more fuel.
13
5
Share

How to Solve Vehicle Pulling to One Side?

Solutions for car pulling to one side: 1. Check tire pressure: The most common cause of car pulling is uneven tire pressure. Visit a maintenance facility to measure and adjust the tire pressure, ensuring all tires have equal pressure. Besides tire pressure, uneven tread wear can also cause pulling, in which case tire rotation or replacement is needed. 2. Perform wheel alignment: This is the most common method to correct pulling. Compared to checking tire pressure, wheel alignment is more costly. Owners can first balance the tire pressure and observe the effect; if the car still pulls, then proceed with wheel alignment. 3. Inspect the suspension system: If wheel alignment doesn't work, consider whether the vehicle's suspension is the issue. A poorly designed suspension system can easily cause pulling. Additionally, damage, deformation, or misalignment of the suspension during use can also lead to pulling. 4. Check the steering system: Over time, the steering system may wear out, causing excessive gaps in connecting parts or loosening of bearings and other components, resulting in the car not following the correct trajectory and pulling to one side.
8
4
Share

Does parking a car near an outdoor air conditioning unit have any impact?

Parking a car near an outdoor air conditioning unit has minimal impact. However, it is not recommended to park there for extended periods as it may damage the car's paint. Below is detailed information about automotive paint: Overview: The primary function of automotive paint is to protect the car body from corrosion. Additionally, automotive paint enhances the vehicle's aesthetic appeal. Automotive paint is a type of coating. The purpose of a spray booth is to provide a clean, safe, and well-lit environment for automotive painting, ensuring that the painting process is free from dust interference and maintains high-quality results. Composition: Automotive paint mainly consists of resin, pigments, additives, fillers, hardeners, and solvents. Metallic automotive paint typically includes reflective metallic flakes (aluminum powder), while pearlescent paint usually contains mica particles.
15
4
Share

How to Determine the Direction of a Car's Air Conditioning Filter?

The installation direction of a car's air conditioning filter is indicated by a small arrow printed on the side of the filter. Simply install it according to the direction of the arrow, which represents the airflow direction of the air conditioning system. Some filters have the word 'UP' next to the arrow on the side, indicating that the side with the arrow should face upward. Here are the functions of the air conditioning filter: 1. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air. 2. It strongly and persistently absorbs moisture, preventing the car windows from fogging up, ensuring clear visibility for drivers and passengers, and enhancing driving safety. 3. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. 4. It effectively sterilizes and deodorizes, keeping the cabin air clean and free from bacterial growth, creating a healthy environment. 5. It effectively separates solid impurities such as dust, powder, and grinding particles from the air.
12
1
Share

What Causes High Temperature in a Loader Transmission?

The causes of high temperature in a loader transmission may include excessively high or low transmission oil level, damaged transmission pump, obstructed oil suction pipeline, or deteriorated hydraulic transmission oil. Below is a detailed introduction about automotive transmissions: Overview: A transmission is a device that alters the speed ratio and direction of motion, typically located between the clutch and the central drive. It can modify the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft according to different working conditions. Gear-driven transmissions generally consist of a housing and several gears. Classification: Automatic transmissions have become mainstream internationally, mainly including AT, AMT, CVT, and DCT types. Early AT transmission systems were predominantly 4AT. AT transmissions achieve automatic gear shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT features two clutches.
15
3
Share

How many kilometers can a car spare tire be driven?

Spare tires are not related to mileage but to speed. Generally, spare tires should not exceed 60 km/h. Below are specific details about spare tires: 1. If it is a full-size spare tire, with the same rim and tire as the wheels, it can be used like a normal tire. 2. If it is a non-full-size spare tire, there are significant speed restrictions during driving—speed should not exceed 80 km/h, and sharp turns or strong impacts should be avoided. Below are extended guidelines for using spare tires: 1. Spare tires should not replace regular tires for long-term use. 2. The hanging position of the spare tire must be appropriate; improper hanging is unsafe. 3. Spare tires should be protected from oil corrosion. The main component of tires is rubber, which is highly susceptible to damage from various oil products. Avoid storing oil products with spare tires. If the tire is contaminated with oil, promptly wash off the oil stains with a neutral detergent. 4. Know the spare tire model. These numbers are crucial for driving safety, especially the load index and speed rating. Exceeding any of these specifications can pose safety hazards. 5. When replacing a spare tire, tighten the bolts diagonally to ensure even force distribution, preventing the tire from wobbling during driving.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.