What tires does the Lexus UX use?

1 Answers
Sebastian
07/30/25 9:08am
The Lexus UX comes with two original tire specifications: 215/60R17 and 225/50R18, equipped with Michelin PRIMACY4 tires that emphasize braking performance. Michelin was established in 1889 in Clermont-Ferrand, France. MICHELIN is the English name of Michelin, and Michelin tires are a French brand. The company now operates across five continents with R&D centers in Europe, North America, and Asia. Michelin is one of the world's top three tire manufacturers. For daily use of Lexus UX tires, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. As tires wear from driving, the tread grooves gradually become shallower. If the tread wears out completely, the tire will lose its ability to drain water and provide traction, significantly reducing the vehicle's performance. Small cracks can also be a hidden danger for blowouts at high speeds. Additionally, promptly remove pebbles from the grooves; try to park on flat surfaces. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this can accelerate tire wear; do not splash water to cool down. In hot weather or during high-speed driving, tires can overheat, and tire pressure may increase. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber; avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.
Was this review help?
6
4
Share
More Forum Discussions

How to open the hood of the X-Trail?

The hood release switch of the X-Trail is located under the left side of the dashboard. Pull this switch to release the hood, then go to the position where the hood pops open and flip the mechanical switch to open the front hood. Below are some engine maintenance methods: 1. Regularly change the engine oil and oil filter. If the filter is clogged, it may burst the filter element or open the safety valve, accelerating engine wear and increasing internal contamination. 2. Regularly clean the fuel system. When cleaning the engine fuel system, use an engine no-clean detergent. 3. Regularly maintain the crankcase. If the PCV valve is blocked, contaminated gases will flow back into the air filter, polluting the filter element and reducing its filtering ability. Inhaling dirty mixed air can lead to increased fuel consumption, accelerated engine wear, and even engine damage.
20
5
Share

What size socket is used for the BYD F3 spark plug?

BYD F3 spark plugs use a 16mm spark plug socket. The spark plug socket is used for installing and removing engine spark plugs, which are categorized by size into 16mm and 21mm. When using, select spark plug sockets of different heights and radial sizes based on the spark plug's installation position and the size of its hexagon. After unscrewing the spark plug, prevent it from falling to the ground. Below are precautions for spark plug replacement: 1. Be gentle when pulling off the high-voltage distributor wires. 2. Clean surface debris before removing the spark plug. 3. Do not forcefully tighten during installation; first try to screw it in smoothly by hand. 4. Ensure the high-voltage distributor wires are installed in the correct order.
6
2
Share

How often should the coolant in the new Jetta be replaced?

The coolant in the new Jetta is recommended to be replaced every 35,000 kilometers or 48 months. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round. The quality of coolant is mainly determined by two factors: 1. Freezing protection effect. Water freezes at 0°C, while standard coolants can typically reach -40°C. High-quality coolants should achieve around -60°C, which is an important indicator of coolant quality. 2. Boiling point of the coolant. Water boils at 100°C, whereas coolant should reach at least 108°C. Generally, the lower the freezing point and the higher the boiling point, the greater the temperature range, indicating better quality coolant.
18
0
Share

How to adjust the instrument lights of Tiida?

The adjustment of the instrument lights for the Tiida is located on the left side of the steering wheel, where there are instrument control buttons that can be directly adjusted. Generally, vehicle instrument lights include the ABS indicator, EPC indicator, O/D gear indicator, seat belt indicator, battery indicator, oil indicator, fuel level indicator, coolant temperature indicator, engine indicator, handbrake indicator, high beam indicator, turn signal indicator, front and rear fog light indicators, and vehicle malfunction indicator. Below is relevant information about instrument lights: 1. Indicator lights: The most common indicators encountered while driving, such as light signal indicators, turn signal indicators, parking lights, etc., which serve to inform the status of various vehicle functions. 2. Warning lights: These have a warning function, such as the fuel indicator, door status indicator, seat belt indicator, etc. Generally, warning lights turn off after the driver performs the corresponding action. 3. Fault indicators: The most important indicators, such as the generator fault indicator, transmission fault indicator, etc. These fault indicators rarely light up under normal circumstances, or they may light up briefly when starting the engine and then turn off. If a fault indicator stays lit and is accompanied by a warning sound, it indicates that the vehicle has a malfunction or abnormality.
15
5
Share

What is the original tire brand for the Ford Escort?

There are two types of tires for the Ford Escort. The mid-to-low trim models use Maxxis VICTRA-510 series tires with the specification 195/65R15. The top trim models use Goodyear Assurance Comfortred series tires with the size 205/55R16. Precautions for tire usage are as follows: 1. Regularly check tire pressure. 2. Regularly inspect tires for bulges, cracks, cuts, punctures, and abnormal wear. 3. Check the tire surface for stones, nails, or other hard objects and clean them promptly. 4. Minimize exposure of tires to direct sunlight.
9
3
Share

What is the recommended tire pressure for BMW X3?

BMW X3 tire pressure is recommended to be set between 2.4 to 2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and decreased by 0.1 bar in summer. The tire pressure display for BMW X3 can be viewed in the vehicle status under "My Vehicle" in the onboard computer's tire pressure monitoring system. Alternatively, you can use the BMW voice function by saying "Hello BMW" followed by "tire pressure," and the tire pressure page will automatically appear on the central control screen for viewing. Tire pressure light reset tutorial: Before restoring tire pressure data, ensure the tires are at normal pressure levels. From the control screen, find the vehicle status option, then select Tire Pressure Monitoring (RDC) from the menu to turn off the tire pressure monitoring system and the engine. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: 1. Abnormal tire pressure. Typically, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. 2. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply perform a tire pressure reset to resolve this. 3. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will come on. In case of sensor damage, the only solution is to replace it with a new one.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.