What tires does the Haval H6 use?

1 Answers
TaylorRose
07/25/25 10:11am
The Haval H6 uses tires sized 235/55R19 and 235/60R18. The specifications of car tires are usually marked on the sidewall of the tire. It is common for different configurations of the same model to use tires of different sizes. Higher-end configurations require larger rims, hence they also require larger tires. The Haval H6 is a compact SUV with a 5-door, 5-seat body structure. Its dimensions are 4653mm in length, 1886mm in width, and 1730mm in height, with a wheelbase of 2738mm. It is equipped with MacPherson independent suspension at the front and multi-link independent suspension at the rear.
Was this review help?
2
1
Share
More Forum Discussions

Do Brake Pads Need to Be Replaced When Changing Brake Rotors?

Replacing brake rotors does not necessarily require replacing brake pads. If the brake pads are still thick, you can change the rotors without replacing the pads. It depends on the situation: Brake rotors typically need to be replaced after two sets of brake pads. When the combined groove depth on both sides of the rotor exceeds 3mm or the edges become sharp, it's time to replace them. When purchasing brake pads, pay attention to the "Four Checks and Two Choices." Here are the details: 1. Four Checks: 1. Check the friction coefficient, which determines the basic braking torque. Too high can cause wheel lock-up, loss of control, or pad burning; too low increases stopping distance. 2. Check safety. Brake pads generate instant high temperatures during braking, especially during high-speed or emergency stops. High temperatures can reduce the friction coefficient. 3. Check comfort, including braking feel, noise, dust, smoke, and odor, which directly reflect friction performance. 4. Check lifespan. Typically, brake pads should last for 30,000 kilometers. 2. Two Choices: 1. Choose brake pads from reputable manufacturers with license numbers, specified friction coefficients, and compliance with standards. The packaging should include a quality certificate, production batch number, and manufacturing date. 2. Choose professional repair shops for installation by qualified technicians.
13
1
Share

Where is the Land Rover Range Rover windshield defogger switch located?

The front windshield defogger button is located on the center console panel. Below is an introduction to the 2021 Range Rover Sport model: 1. Dimensions: The body length*width*height is 4851*2073*1781mm, with a wheelbase of 2924mm. 2. Powertrain: The Range Rover Sport is equipped with a 3.0T engine, delivering a maximum power of 283KW and a maximum torque of 450N.M. The maximum power is achieved at 6500 rpm, and it features a front-engine, four-wheel-drive layout. 3. Interior: The steering wheel adopts a four-spoke design, with dual horn buttons positioned more towards the inner side. The multifunction steering wheel integrates audio volume adjustment, cruise control functions, and also includes controls for the car phone.
1
3
Share

How to use the paddle shifters on the Mercedes-Benz GLA?

To use the paddle shifters on the Mercedes-Benz GLA, first place the gear lever in manual mode, then freely switch to the desired gear using the paddle shifters when the engine speed is appropriate. Below is some information about Mercedes-Benz: 1. Introduction: Mercedes-Benz (German: Mercedes-Benz) is a German automotive brand renowned for luxury and high performance. 2. Content: Headquartered in Stuttgart, Germany, it is a member of the Daimler AG group. Its products include various passenger cars, medium and large commercial vehicles, etc. 3. Development: In June 2021, Kantar released the "2021 BrandZ Top 100 Most Valuable Global Brands" ranking, with Mercedes-Benz ranking 67th with a value of 25.835 billion USD.
14
2
Share

What is the off-road mode of the Mercedes-Benz GLE?

The off-road mode of the Mercedes-Benz GLE includes: 1. Unlimited Power: It allows the vehicle to effortlessly escape from difficult situations, whether on city highways or in suburban areas. 2. Overcoming Challenges: It can mitigate the impact of extreme conditions and body distortion. Relevant information about the Mercedes-Benz GLE is as follows: 1. Exterior: The front features a large three-pointed star logo, paired with a three-dimensional double-bar grille design, and chrome trim on both sides. 2. Interior: It includes independently designed dual 12.3-inch full LCD instrument panel and central control LCD display. 3. Powertrain: The new model is equipped with a 3.0-liter twin-turbocharged inline six-cylinder engine, replacing the current V6 engine, delivering a maximum power of 435 horsepower (approximately 324 kW) and a maximum torque of 520 Nm.
10
2
Share

How to Deal with Installing Sirens on Private Cars?

Installing sirens without authorization is a serious violation of the law. According to Article 97 of the 'Road Traffic Safety Law of the People's Republic of China,' illegally installed sirens and warning lights will be forcibly removed and confiscated by the traffic management department of the public security organ, and a fine will be imposed without deducting points. If this leads to fraudulent activities or extortion, it will constitute a criminal offense. Auto accessory shops that illegally sell and install sirens can be penalized by the industrial and commercial department for operating beyond their permitted scope if discovered. Additional information: According to Article 16 of the 'Regulations on the Registration of Motor Vehicles' issued by the Ministry of Public Security: 1. Anti-collision devices: Small and mini passenger vehicles may install front and rear anti-collision devices; 2. Windshields, water tanks, toolboxes, spare tire racks: Cargo vehicles may install windshields, water tanks, toolboxes, spare tire racks, etc.; 3. Interior decorations: Additional interior decorations may be added to motor vehicles.
1
3
Share

How to deal with water entering the car through an open window without causing standing water?

When water enters the car through an open window without causing standing water, the treatment is as follows: remove the water inside the car, wipe dry the wet areas, then open the doors for ventilation. After the moisture has dried, test the electronic equipment in the car to ensure it functions properly. Precautions are as follows: 1. Moisture evaporation: Wet seats may develop mold. Avoid using a hot air blower to dry them. If the car has seat heating functions, use them to speed up moisture evaporation. After air-drying, use a leather polish cleaner. For sponge seats, you can remove the entire seat and air-dry the sponge inside. 2. Carpet cleaning: Do not soak the carpet completely in water for cleaning. On one hand, this can damage the bonding between different layers of the carpet material. On the other hand, it may prevent the carpet from drying thoroughly for a long time, affecting its use and causing dampness inside the car.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.