What tires does the Escort use?

3 Answers
Luke
07/29/25 11:44am
The Escort uses Maxxis tires with a tire size of 195/65/R15 91V. The Escort is a compact car under Changan Ford. Taking the 2019 Escort manual model as an example, it is a 4-door, 5-seater sedan with body dimensions of 4587 mm in length, 1825 mm in width, 1490 mm in height, and a wheelbase of 2687 mm. The 2019 Escort manual model is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 90 kW at 6500 rpm and a maximum torque of 152 Nm at 4500 rpm.
Was this review help?
17
5
Share
NoraAnn
08/13/25 8:24pm
I've been driving this Ford Escort for several years, and it came with original Michelin tires sized 205/55 R16. The grip feels excellent for daily commuting. Just a heads-up that specifications might vary slightly between model years - for instance, newer versions use 215/50 R17. Tire selection is crucial. I check tire pressure monthly, maintaining around 2.3 bar to prevent premature wear. Remember to get wheel alignment every two years or 20,000 km - it extends tire life and saves fuel costs. Never ignore aging tread patterns - replace tires older than 5 years as safety comes first. Before long trips, I always inspect tire conditions to avoid mid-journey breakdowns.
Was this review help?
4
4
Share
Expand All
SanBrooke
10/08/25 6:14am
In the car dealership, I often see the Ford Escort, which usually comes with original tires sized 205/55 R16 or 215/50 R17, commonly from Michelin or Bridgestone. I always tell the owners that tire pressure is the most important—check the label on the door frame, with the standard being 2.2-2.5 bar. Don’t casually change the tire size, as it can affect braking distance and safety. Tires should be replaced every 5 years or 50,000 kilometers, and if the tread depth is below 1.6mm, they’re no longer safe to use. I recommend sticking to the original specifications with run-flat tires, like those from big brands such as Goodyear, which provide better stability on wet roads. Daily driving should avoid high speeds on gravel roads to minimize the risk of unexpected damage.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Which country is the George Patton off-road vehicle from?

George Patton off-road vehicle is a super off-road vehicle made in the United States. The following is a related introduction to George Patton: 1. George Patton off-road vehicle is an imported ORV (designed specifically for the Asian market) under USSV. The 2017 model was developed based on the Ford F550 chassis, with the same series model being the Rhino GX. 2. The essence of the George Patton off-road vehicle is a pickup truck with a modified shell. The body dimensions are 5930*2537*2145, with a wheelbase of 3584mm. Compared to the F150, the main modifications are widening and shortening the wheelbase.
16
2
Share

What brand is the Highlander's audio system?

The audio system in the Highlander is from the JBL Premium series. Introduction to the Highlander's vehicle configuration: In terms of interior design, the 2020 model features a stronger sense of technology and luxury. The dashboard incorporates rich design lines and elements, adding ambient lighting and two-tone stitching decorations. The center console screen adopts a semi-floating design, exuding a high-tech feel, and the instrument panel is fully digital. The interior of the Highlander largely continues the layout and design of the current model, with upgrades in details. The instrument panel has been upgraded from a 3.5-inch monochrome display to a 4.2-inch color display (excluding the Elite version), capable of showing vehicle information, turn-by-turn navigation, and AWD four-wheel drive torque distribution, among others.
11
2
Share

Is it necessary to shift to N gear when having Auto Hold?

Cars equipped with the Auto Hold function do not require shifting to N gear during temporary stops. Auto Hold is essentially an automatic braking feature. When waiting at traffic lights, there is no need to engage the handbrake or electronic parking brake, and consequently, there's no need to change gears. However, in situations of severe traffic congestion where the vehicle remains stationary for extended periods, it is advisable to deactivate the Auto Hold function and switch to manual control by shifting to neutral (N gear). This practice helps protect the transmission and engine, thereby extending their service life. The English term for Auto Hold is 'AutoHold,' and its button is typically marked with a capital letter 'A' or the full English spelling. It relies on an intelligent braking system to function.
8
4
Share

How to Remove the Door Panel of a Compass?

The following are the steps to remove the door panel of a Compass: 1. Unscrew the fixing screws of the inner door handle, remove the safety lock knob, and take off the surrounding plastic clips. 2. Lift the door from the top, disconnect the speaker wires after locating them, and then remove the door panel. 3. To avoid damaging the door panel, it is recommended to have it removed by professionals at a 4S shop. Here is some additional information about the Compass: 1. The Compass has a body size of 4424mm in length, 1819mm in width, and 1635mm in height, with a wheelbase of 2636mm. 2. The front suspension of the Compass uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension, with a unibody structure.
11
1
Share

Matching RPM and Gears in Manual Transmission?

Manual transmission vehicles require proper gear-speed synchronization as follows: 1st gear at 15 km/h; 2nd gear at 25 km/h; 3rd gear at 35 km/h; 4th gear at 55 km/h; 5th gear at 65 km/h or above. Manual transmission, also called manual gearbox, represents a fundamental type of automotive transmission system. Its primary function is to alter the gear ratio (also known as the torque ratio) by utilizing larger-diameter low-gear wheels based on the lever principle's torque mechanism, thereby amplifying engine torque to initiate vehicle movement. A manual transmission consists of three core components: the gear mechanism, transmission housing, and shift linkage assembly.
12
1
Share

What are the body dimensions of the GS4?

GS4 body dimensions, taking the 2021 model as an example, are 4525mm in length, 1852mm in width, and 1668mm in height, with a wheelbase of 2680mm. The 2021 GS4 is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 265 Nm, with the maximum torque available between 1700 to 4000 rpm. It is paired with a 6-speed automatic transmission. The 2021 GS4 adopts the Light and Shadow Sculpture 3.0 design, and all models are front-wheel drive. In terms of suspension, the 2021 GS4 uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.