What tires does the Chevrolet Cavalier use?

3 Answers
McDante
07/24/25 12:36am
The Chevrolet Cavalier uses 205/55r16 tires. 205/55r16 indicates that the tire width is 205mm, the aspect ratio is 55, 'r' stands for radial tire, and 16 means the tire can be mounted on a 16-inch wheel rim. Taking the 2020 Chevrolet Cavalier as an example, its body dimensions are: length 4474mm, width 1730mm, height 1471mm, wheelbase 2600mm, and trunk capacity 469l. The 2020 Chevrolet Cavalier is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, maximum power of 92kW, maximum torque of 180Nm, and is paired with a 6-speed automatic transmission.
Was this review help?
3
4
Share
Rylee
08/10/25 8:06pm
My Chevrolet Cavalier originally came with 195/65R15 all-season tires, like those from Goodyear or Michelin. They provide a stable ride, especially in rainy conditions to prevent skidding—safety first! After driving for over two years, I’ve learned that choosing tires depends on daily road conditions: if you frequently drive in the city or on highways, opting for quiet tires can make the ride more comfortable and reduce fatigue. If you live in a snowy area, switching to winter tires is a smarter choice. Don’t forget maintenance details, like checking tire pressure monthly and keeping it around the recommended 32-35 psi—this saves fuel and extends tire life. After getting new tires, I noticed a slight improvement in fuel efficiency, squeezing a few extra kilometers per tank—just a little tip.
Was this review help?
8
2
Share
Expand All
NolanMarie
09/24/25 2:13am
I recommend Chevy Cavalier owners to prioritize the original size 195/65R15. Cost-effective brands include Bridgestone or Yokohama's energy-saving tires, with fuel cost savings being a major advantage, making daily driving worry-free. Before changing tires, I would compare prices, either online or at discount stores, typically costing around 500-800 RMB per tire. In terms of durability, Michelin all-season tires can last 40,000-50,000 kilometers, provided you avoid rough roads. A related point to note: low rolling resistance tires can reduce fuel consumption by 5% and are more environmentally friendly. When changing tires, it's also a good idea to check wheel alignment to avoid uneven wear, which can save you thousands in repair costs over a year or two.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

Can You Go Straight on a Left Arrow Green Light?

You cannot go straight on a left arrow green light. Classification of Traffic Signals: Traffic signals can be divided into: motor vehicle signals, non-motor vehicle signals, pedestrian crossing signals, directional indicator signals (arrow signals), lane signals, flashing warning signals, and railway crossing signals. Relevant Regulations on Signal Passage: Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. Legal Liability Article 90: Motor vehicle drivers who violate road traffic safety laws and regulations regarding road passage shall be given a warning or fined. Where this law provides otherwise, punishment shall be imposed in accordance with the relevant provisions.
14
1
Share

What to Look for in Urban Road Sign Recognition?

Urban road sign recognition generally refers to guide signs on ordinary roads. Guide signs for ordinary roads: Color and graphics: blue background with white graphics, white borders, and blue edging. Classified by function: route guidance signs, location guidance signs, roadside facility guidance signs, and other road information guidance signs. Principles for reading road signs: The general principles are: left for near, right for far; top for near, bottom for far. Route guidance signs are divided into: intersection advance signs, intersection notification signs, and confirmation signs. Intersection advance signs for ordinary roads are mainly used on highways. Due to the high density of urban road networks and short distances between intersections, such advance signs are rarely installed on urban roads. The layout and information selection for intersection notification signs are consistent with advance signs, with the only difference being that advance signs include distance information on the sign panel.
17
3
Share

Is the USB interface light of the Haval F7 always on?

The USB interface light of the Haval F7 is normally not always on. The reason why the USB interface light of the Haval F7 stays on is that the car's power supply is not completely cut off. If the USB interface light stays on, restart the engine and then turn it off, and the power supply will be disconnected in about ten minutes. Function of the car USB interface: The USB interface in the car can be used to plug in a USB drive to listen to songs, charge mobile phones and MP3 players, serve as a USB car cigarette lighter interface, function as an interface for electronic dogs and dash cams, and charge computers and tablets. It utilizes the standard power supply in the car to charge DC to 5-volt electrical appliances via the USB interface or serves as a fixed power supply interface for electrical devices. USB working principle: The power supply inside the car converts DC to 12 volts or DC to 24 volts into DC to 5 volts, and then uses the unified USB interface to transfer the DC to 5-volt output to charge the corresponding electrical appliances. Since different electrical appliances have different power requirements, the power of the USB car charger also varies greatly, mainly differing in the current output of the USB car charger.
13
4
Share

How many cylinders does the Hyundai Elantra have?

The Hyundai Elantra is equipped with a four-cylinder engine, offering two engine options: a 1.6L and a 1.4T. The main focus is on the 1.6L naturally aspirated engine, which features direct fuel injection technology, delivering a maximum power of 95.3 kW and a maximum torque of 157 Nm. It is paired with either a 6-speed manual or a 6-speed automatic transmission. The Hyundai Elantra has body dimensions of 4610mm in length, 1800mm in width, and 1450mm in height, with a wheelbase of 2700mm. In terms of features, the Elantra comes with an electric sunroof and a rearview camera, while higher trim levels also include front parking sensors. The Elantra offers three wheel designs, with sizes ranging from 16 inches to 17 inches, and tire specifications of 205/55R16 and 225/45R17.
17
5
Share

What Does Engine Cylinder Scoring and Bearing Burning Mean?

Engine cylinder scoring refers to vertical scratch marks appearing on the cylinder walls of an engine; engine bearing burning means severe scratches and abrasions on the journal surface, which oxidize and turn blue. Below are some related expanded contents: Causes of engine cylinder scoring: Cylinder scoring is related to engine lubrication. If the engine lacks oil, the oil has been used for too long and its viscosity is insufficient, the oil passages are blocked, or there are too many impurities in the oil, all these can cause cylinder scoring. Causes of engine bearing burning: Bearing burning is mainly caused by insufficient lubrication or too small a gap between the journal and the bearing. When a sliding bearing is working, a very thin oil film is required between the bearing and the rotating shaft for lubrication. If lubrication is poor, direct friction occurs between the bearing and the rotating shaft, generating very high temperatures. Although bearings are made of special high-temperature-resistant alloy materials, the high temperatures produced by direct friction are still sufficient to burn them out.
20
5
Share

What is the fuel consumption of a Jaguar?

Jaguar's official combined fuel consumption (L/100km) is 6.9- Taking the Jaguar XF as an example, its fuel consumption per 100 kilometers ranges between 11.57-12.65L/100km. Below is extended information about fuel consumption: Factors affecting fuel consumption: Fuel consumption can be influenced by various factors, such as road conditions, driving habits, and oil quality. Since vehicles often experience acceleration, deceleration, braking, and engine idling during actual driving, constant-speed fuel consumption is often lower and differs significantly from actual fuel consumption. Methods for calculating fuel consumption: Average fuel consumption = (Total fuel added - Last fuel added) / Distance traveled. Simply put, fill up the fuel tank, note the mileage (or let the vehicle record it automatically), drive until half a tank is used, then refill. Before refueling, check the mileage to see how many kilometers were traveled, then divide the distance by the amount of fuel added this time.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.