What tires does the Baojun 510 use?

What is the reason for the abnormal noise in manual transmission idle speed disappearing when the clutch is pressed?

The reason for the abnormal noise in manual transmission idle speed disappearing when the clutch is pressed is: problems with the transmission bearing, looseness or detachment of the release bearing causing vibration and abnormal noise. When the clutch pedal is pressed, the bearing is pressed against the clutch pressure plate, causing the bearing to rotate, at which point the abnormal noise disappears. The functions of the clutch are: 1. Gradually increase the driving force of the car, allowing the car to start smoothly; 2. Temporarily separate the engine and transmission for gear shifting; 3. Prevent overload of the transmission system; 4. Reduce torsional vibration impact from the engine and extend the life of the transmission gears.

14

5

Share

What is the reason for not seeing oil on the dipstick but no warning light?

The reason for not seeing oil on the dipstick but no warning light is that the current oil pressure is sufficient. Although the oil level is below the lower mark, the oil pump maintains adequate pressure. You can drive for a short distance, but you should immediately go to a professional repair shop for inspection and maintenance to prevent engine damage. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine components; 4. To cushion the rising pressure in the engine cylinder; 5. To clean dirt generated on the surfaces of engine parts.

17

3

Share

What is the reason for the engine belt noise stopping after pouring water?

The reason why the engine belt noise stops after pouring water is: the friction between the belt and the pulley produces noise, and pouring water can increase the viscosity of the belt, avoiding abnormal noise from the engine belt. However, after the water dries, the belt will return to its original state. The function of the car engine belt is: to transmit the force of the crankshaft to drive the working parts such as the water pump and the charging generator. The steps to replace the car engine belt are: 1. Lift the car with a jack; 2. Remove the engine bottom plate, and the engine belt can be seen after removing the bottom plate; 3. Remove the exposed old engine belt and replace it with a new one.

18

1

Share

What are the steps and precautions for changing engine oil?

Steps for changing engine oil: 1. Lift the car, remove the protective plate, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, tighten the oil drain plug after draining, and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate, lower the car, and add engine oil using a funnel aligned with the oil filler port. Precautions for changing engine oil: 1. Drain the oil when it is hot for better fluidity; 2. Fill to the level indicated on the dipstick; 3. Choose the oil change interval based on the car's condition, road conditions, oil quality, and driving habits; 4. Select the oil grade according to the driving environment, driving frequency, and the requirements of the vehicle's engine itself—prefer higher quality over lower.

13

1

Share

What is the reason why the Roewe RX5 cannot start even with a jump start?

The reason why the Roewe RX5 cannot start even with a jump start is: the remaining charge in the car battery is too low, and the power is insufficient to start the car. Taking the 2020 luxury version Roewe RX5 as an example, its body length, width and height are: 4571mm, 1855mm, 1719mm, and the wheelbase is 2708mm. The 2020 luxury version Roewe RX5 front suspension is MacPherson independent suspension, the rear suspension is longitudinal trailing arm semi-independent suspension, it is equipped with a 1.5L turbocharged engine, the maximum horsepower is 173ps, the maximum power is 127kw, the maximum torque is 275nm, and it is matched with a 6-speed manual transmission.

8

2

Share

At What Temperature Does Engine Oil Freeze?

The freezing point of engine oil depends on its type: 1. 5W oil can be used at temperatures as low as -30 degrees Celsius; 2. 10W oil can be used at temperatures as low as -25 degrees Celsius; 3. 15W oil can be used at temperatures as low as -20 degrees Celsius; 4. 20W oil can be used at temperatures as low as -15 degrees Celsius. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To bring heat back to the oil tank and then dissipate it into the air, helping the radiator cool the engine; 3. To circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, washing away dirt generated on the working surfaces of parts through the flow of lubricating oil.

15

4

Share

What tires does the Baojun 510 use?

What is the reason for the abnormal noise in manual transmission idle speed disappearing when the clutch is pressed?

What is the reason for not seeing oil on the dipstick but no warning light?

What is the reason for the engine belt noise stopping after pouring water?

What are the steps and precautions for changing engine oil?

What is the reason why the Roewe RX5 cannot start even with a jump start?

At What Temperature Does Engine Oil Freeze?

What does an exclamation mark in the middle of a car dashboard bulb mean?

Do You Need to Replace All 4 Tires at Once?

Is it better to buy a car with a T engine or an L engine?

What is the reason for the constant rattling sound when holding the brake in D gear?