What tires are used on the Vision SUV?

2 Answers
EleanorDella
07/29/25 6:01am
The Vision SUV uses Chaoyang tires. The tire size is 205/60R16. Chaoyang tires are a brand under Zhongce Rubber Co., Ltd., established in 1966. Chaoyang tires cover passenger car tires, commercial vehicle tires, industrial and engineering tires, agricultural tires, and two-wheeler tires. For the Vision SUV's tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires can overheat, and pressure may increase. In such cases, stop to let the tires cool naturally. Avoid releasing air to reduce pressure or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road surface.
Was this review help?
10
5
Share
VanCharles
08/12/25 9:31am
The Geely Vision SUV usually comes standard with 205/55R16 tires. After driving this car for a while, I noticed that the factory-fitted tires are from domestic brands like Linglong or Giti, which focus on economy and durability. The noise level is acceptable for city driving, and the wet road grip is decent. Considering the SUV's load requirements, maintaining tire pressure between 230-240kPa is crucial to avoid increased fuel consumption or uneven tire wear. Regularly check the tread depth—replace the tires if it's less than 3mm. Geely chose these tires to balance costs, with prices typically ranging from 400-600 RMB per tire. When buying online, check the production date to avoid old stock. All-season tires are sufficient for most weather conditions during seasonal changes. Safety first—don’t wait for a flat tire to perform maintenance.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Why is the air conditioning not cooling at idle speed?

When the air conditioning is not cooling at idle speed, it is usually because the expansion valve is damaged, preventing the formation of high pressure in the system before the expansion valve. As a result, the high-pressure refrigerant cannot reach the required pressure of 150 kPa, leading to the evaporator behind the expansion valve failing to cool down, which causes the air conditioning to not cool properly. Another possible reason is internal wear in the air conditioning compressor, which prevents the pressure between the compressor and the expansion valve from reaching the required range of 150 kPa to 200 kPa, resulting in insufficient cooling. The car air conditioning system is an air conditioning device installed in vehicles, capable of cooling, heating, ventilating, and purifying the air inside the cabin. It provides a comfortable environment for passengers, reduces driver fatigue, and enhances driving safety.
15
4
Share

What do the plus and minus signs above the D gear mean?

The plus and minus signs above the D gear indicate that the vehicle's automatic transmission is a manual-automatic integrated transmission with manual functionality. While driving, you can shift the gear lever from the D gear to the side with the plus and minus signs, which will simulate a manual transmission, preventing the transmission from automatically upshifting. When pushed towards the plus sign, the gear will increase; when pushed towards the minus sign, the gear will decrease. The D gear, also known as the drive gear, when the gear shift lever is in this position, the hydraulic system control mechanism will automatically engage the corresponding forward gear circuit based on the throttle opening signal and vehicle speed signal. Automatic transmission generally refers to the car's automatic gear-shifting mechanism, where the control system of the automatic transmission selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment of timing and gear-shifting operations.
3
2
Share

Can a newly purchased car without license plates drive on the highway?

A newly purchased car without license plates cannot drive on the highway, but it can do so with temporary license plates. Here are the relevant details: 1. The state implements a registration system for motor vehicles. Motor vehicles can only be driven on the road after being registered with the traffic management department of the public security authority. For motor vehicles that have not yet been registered, if they need to be driven on the road temporarily, they must obtain temporary license plates. 2. When driving a motor vehicle on the road, the vehicle's license plates must be displayed, along with the inspection qualification mark and insurance mark, and the vehicle's driving license must be carried in the vehicle. 3. Motor vehicle license plates must be displayed as required and kept clear and complete, and must not be intentionally obscured or damaged. No unit or individual may confiscate or detain motor vehicle license plates.
14
4
Share

What to Do When a Car Gets a Dent?

Repair methods for a dent in a car: 1. Traditional metalworking is required to restore it to its original condition. Metalworking repair involves fixing the deformed part of the car's metal shell; 2. Then, by spraying special paint, the deformed metal surface of the car is restored to match the undamaged areas. A palm-sized dent will crack over time if only filled with putty. The repair steps are: 1. First, perform metalworking to pull out the dent; 2. Then apply metal filler, sand it, and after leveling, apply fine filler; 3. Then wet sanding; 4. Cover with masking paper and proceed to spray painting; 5. Polishing. Generally, this needs to be done at a repair shop or 4S shop for metalworking and painting.
14
3
Share

How to Replace a Broken Front Wheel Bolt on the Tiggo 3?

The method for replacing a broken front wheel bolt on the Tiggo 3: You need to use a jack to remove the wheel hub nuts in a diagonal sequence, then take off the wheel hub and tire. Next, remove the broken bolt from the bearing area, unscrew the remaining part, and replace it with a new one according to the model specifications. The Tiggo 3 is a model under Chery Automobile Co., Ltd., with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. In terms of interior, the Tiggo 3 features a three-spoke steering wheel with moderate size and good grip, complemented by lead-gray decorative strips, giving an overall good impression, which also reflects the high precision of the manufacturing mold.
9
5
Share

What Causes the Lack of Power and Muffled Acceleration in the Ninth-Generation Accord?

Here are the specific reasons for the lack of power and muffled acceleration in the ninth-generation Accord: 1. Carbon deposits: Carbon buildup, including cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, and intake carbon deposits, can all lead to sluggish acceleration and a muffled sound. 2. Fuel system: Using an incompatible fuel grade can reduce the vehicle's output power, resulting in weak engine acceleration. 3. Air intake: If the air filter is clogged due to prolonged use without timely cleaning, insufficient air volume will cause an overly rich air-fuel mixture, leading to decreased engine power. For vehicles equipped with a turbocharger, if the turbocharging system fails, the engine will remain sluggish and unable to deliver full power even when the throttle is applied. 4. Engine overheating: Overheating can impair lubrication, increase mechanical wear, reduce engine power, and result in weak acceleration.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.