What tires are used on the Southeast DX3?

3 Answers
DiArcher
07/28/25 11:53pm
The Southeast DX3 uses Giti tires, with two available models: one is a 18-inch tire sized 215/55R18, and the other is a 17-inch tire sized 215/60R17. The DX3 is Southeast's first compact SUV model, featuring a sleek and dynamic body design. The roof adopts a two-tone color scheme, creating a floating roof visual effect that caters to the aesthetic preferences of young consumers for vitality and sportiness. The dimensions of the Southeast DX3 are 4354mm in length, 1840mm in width, and 1670mm in height. It is equipped with a combination of front MacPherson independent suspension and five-link rear independent suspension, along with front and rear subframes and a ground clearance design of up to 200mm.
Was this review help?
2
1
Share
Jonathan
08/12/25 4:11am
I've been driving the Soueast DX3 for quite a while, and it came with Hankook Kinergy Eco series tires, size 215/55 R18. These tires are very quiet in the city and quite fuel-efficient. I remember not needing to replace them for the first two years, as they have good wear resistance—I drove nearly 60,000 kilometers before noticing significant wear. It's recommended to maintain tire pressure around 2.4 bar; don't let it get too low to avoid affecting fuel consumption and safety. When replacing tires, you might consider similar specifications from Michelin or Goodyear, priced around 2,000 yuan per set—they offer great value for money. They perform stably in rain or snow with good grip, but avoid driving on very rough roads to prevent punctures. Maintenance is simple; I check the tread depth myself every two months and replace them immediately if it's below 1.6mm. Overall, the DX3 paired with these tires feels well-balanced, suitable for family use while being economical.
Was this review help?
15
2
Share
Expand All
Pires
08/12/25 4:12am
I'm quite satisfied with the tires on my DX3. The original Hankook Kinergy Eco 215/55 R18 tires focus on energy efficiency and comfort. The replacement interval depends on driving habits - I changed mine after 50,000 km when the tread became shallow. Don't wait until they're completely worn to avoid risks. For daily maintenance, remember to check the valve stems and rims for rust, and maintain proper air circulation. When replacing, consider Continental EcoContact series - quieter but more expensive, about 2,500 yuan per set. They provide excellent stability at high speeds and good cornering performance, but drive slower in rainy conditions. Recommended maintenance cycle is every 5,000 km at the shop, costing just tens of yuan each time, which significantly extends tire life and saves money. From a maintenance perspective, these tires aren't fussy - quite hassle-free and easy to maintain.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Where to Add Windshield Washer Fluid in the Sagitar?

In the Sagitar, the windshield washer fluid is added in the engine compartment. Open the engine hood, and in the lower right corner of the engine compartment, you will find a white cap. This is where you add the windshield washer fluid. Simply open the white cap and pour in the fluid. The maximum capacity is 1.5 liters. Below is some related information about Sagitar windshield washer fluid: 1. Summer-specific: This type of windshield washer fluid contains additional insect remover, which helps quickly remove insect residue from the windshield. 2. Standard winter windshield washer fluid: Also known as antifreeze windshield washer fluid. This type ensures that the fluid does not freeze or damage car components even when the outside temperature drops below -20°C. 3. Special antifreeze windshield washer fluid: This type remains unfrozen even at -40°C, making it suitable for extremely cold regions.
1
2
Share

How to Clean a Motorcycle Carburetor?

Cleaning a motorcycle carburetor involves four steps: 1. Remove the carburetor from the motorcycle, turn off the fuel supply, and disconnect the fuel line. Use an 8mm or 10mm wrench to loosen the nuts connecting the carburetor to the engine, then remove the screws connecting the carburetor to the air filter. 2. Disconnect the throttle cable, turn off the fuel supply, and disconnect the fuel line. Remove the carburetor float chamber and use a Phillips screwdriver to remove the three screws on the carburetor float chamber cover. 3. After disassembling the carburetor, remove the main jet, idle jet, and float, then begin cleaning the carburetor. 4. Spray carburetor cleaner into each jet, being careful not to aim the cleaner toward your eyes. Once cleaning is complete, reassemble the carburetor.
3
1
Share

What is the most suitable temperature for car heating?

The most comfortable temperature for humans is between 20℃ and 25℃. Here are the relevant details: 1. Temperatures above 28℃ will make people feel hot, while temperatures below 14℃ will make people feel 'cold.' Therefore, it is best to control the temperature inside the car between 18℃ and 25℃. Generally, the temperature difference between the inside and outside of the car should be within 10℃. 2. When driving in the morning during winter, do not turn on the heating immediately after starting the car, as the engine is still cold and will not produce warm air. Instead, warm up the car first and wait until the engine reaches a certain temperature or the water temperature rises before turning on the heating. 3. Another important point is not to press the A/C button when using the heating in winter, as this controls the car's air conditioning compressor. The heating system utilizes the residual heat from the engine's cooling system to function and does not require the compressor to produce warm air. Pressing the A/C button while using the heating will only increase fuel consumption.
17
5
Share

The Difference Between AMT Transmission and Tiptronic Transmission

The differences between AMT transmission and Tiptronic transmission are as follows: 1. AMT is a semi-automatic transmission that does not have a clutch pedal. When shifting gears, it operates similarly to Tiptronic - after the vehicle comes to a complete stop, simply press the brake and directly move the gear lever. 2. AT is the earliest automatic transmission that appeared in automobiles. It is a very complex precision device, and currently, there is basically no domestic production capability in China. Tiptronic, on the other hand, is based on AMT but adds paddle shifters or gear positions that allow for manual forced upshifting or downshifting. 3. Under normal operating conditions, AMT shifts gears at 1800-2200 RPM, while in sport mode, it shifts at 2500-3000 RPM. The AMT transmission has five gear positions in total: R, N, D, A/E, and +/-. The difference from Tiptronic is that it lacks a parking gear (P gear), so when parking, the handbrake must be engaged for an AMT transmission.
20
3
Share

How to Solve the Brake Squealing Issue in XT5?

Solutions for XT5 brake squealing are as follows: 1. If it's a new brake pad, check whether the brake disc has grooves, as localized friction can cause noise. 2. If the noise persists, first inspect for dragging brakes; poor caliper retraction can lead to prolonged friction between the disc and pad. Below is relevant information: 1. Brake disc issue: Brake pad noise could also be caused by problems with the brake disc, typically due to disc deformation. While driving, slight wobbling may grind against the brake pads, causing noise. This can usually be resolved by performing an out-of-round repair and resurfacing of the disc and pads. 2. Dull noise: However, if the brake noise is more of a dull sound, it might indicate issues with the brake caliper, worn sliding pins, or detached spring clips. These more technical inspections may not be noticeable to car owners and should be checked and addressed at an auto repair shop or 4S dealership.
15
2
Share

Where is the cigarette lighter fuse in the Trumpchi GS4?

The cigarette lighter fuse in the Trumpchi GS4 is located in the cabin fuse box. Here are some precautions for using the cigarette lighter: Avoid using high-power electrical appliances on the cigarette lighter: The maximum power capacity of a cigarette lighter is generally 120W. Exceeding this value can easily cause the cigarette lighter to overload, leading to various hazards such as burning out the cigarette lighter. Start the vehicle when using the cigarette lighter for extended periods: If you need to use the cigarette lighter for a long time or with high-power devices, start the car engine to enhance the power supply. This prevents draining the car battery. Properly plug and unplug the cigarette lighter: The cigarette lighter has a separate safety device. The correct method is to insert and remove it vertically. Avoid wiggling it when pulling it out, as frequent movement can loosen the fuse and cause a short circuit, which may burn out the fuse and external devices. Remove external devices promptly after parking: After turning off the vehicle, unplug any external devices from the cigarette lighter as soon as possible. Otherwise, when the vehicle starts, the large current surge can easily burn out the devices, especially MP3 players and USB drives, which are particularly prone to issues.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.