What tires are used on the Peugeot 206?

2 Answers
StNora
07/24/25 3:00am
The Peugeot 206 uses Goodyear tires. A major characteristic of this tire brand is its long service life. After installing these tires, when the vehicle's mileage reaches 10,000 kilometers, the tread pattern shows only minimal wear, and the tread does not deform. The Peugeot 206 has a body length of 3873mm, width of 1673mm, height of 1435mm, and a wheelbase of 2443mm. This model is equipped with a 4-cylinder 16-valve engine and a 4-speed automatic transmission. The car features user-friendly storage spaces for occupants, including door compartments, front panel storage, and a glove box in front of the passenger seat.
Was this review help?
8
5
Share
IsaacFitz
08/10/25 10:37pm
The original tires for the Peugeot 206 typically use the size 175/65 R14, a detail frequently discussed in owner communities. This size means the tire width is 175 mm, with an aspect ratio of 65%, fitted on 14-inch rims. Common OEM brands include the Michelin ENERGY series, emphasizing low rolling resistance and comfort. Actual sizes may vary by model version—for example, the 1.4L engine variant might come with 185/60 R14. Tire choice is crucial: narrower tires aid fuel efficiency but slightly compromise stability, so it's advisable to check your vehicle manual or door frame label for the exact specifications. Regular tire pressure checks (2.3-2.5 bar) prevent uneven wear and extend lifespan. When replacing, stick to OEM specs for handling safety, though upgrading to performance tires like Goodyear can slightly improve wet grip at the cost of higher fuel consumption.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Does the Porsche Cayenne use a horizontally opposed engine?

Porsche Cayenne does not use a horizontally opposed engine. The vehicle is equipped with a 3.0-liter V6 turbocharged engine, delivering a maximum power of 250kW and a peak torque of 450Nm. The engine reaches its maximum power at 5,300 to 6,400 rpm and its peak torque at 1,340 to 5,300 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. The Porsche Cayenne employs a multi-link independent suspension for both front and rear, comes with a full-time four-wheel-drive system, and uses a multi-plate clutch-type central differential.
8
5
Share

Will a Motorcycle Explode if Exposed to Direct Sunlight?

Under normal circumstances, a motorcycle will not explode when exposed to direct sunlight. Below is a detailed explanation of the potential hazards of prolonged sun exposure for motorcycles: 1. Components: The motorcycle's battery and electrolyte can be affected, as the sun may cause faster evaporation. Additionally, certain parts of the motorcycle, such as tires and seats made of rubber, will experience increasing temperatures under prolonged sun exposure, leading to gradual aging and reduced lifespan. 2. Vehicle: The paint on the motorcycle's surface may peel. Extended exposure to sunlight can cause the paint to soften and eventually flake off. This also contributes to a shorter lifespan for the motorcycle. Some rubber and plastic parts may age prematurely.
20
4
Share

Which gear should be used when driving uphill?

When driving uphill, the gear selection depends on the engine speed. If you are in third gear and the engine speed drops below 2000 RPM while climbing, you should downshift to second gear. For very steep slopes or when the car is fully loaded, you may need to shift to first gear to ascend successfully. When descending, it's advisable to maintain a specific gear based on the slope's steepness—second gear is typically suitable for steep descents. Coasting downhill in neutral can cause the car to accelerate uncontrollably, making it difficult to slow down or stop using only the brakes, which could lead to accidents. Additionally, continuously using the brakes on a long descent can overheat the braking system, potentially causing failure and posing significant danger.
7
2
Share

Where to Turn On Car Bluetooth?

Location to turn on car Bluetooth: Find the settings on the central control panel, where there will be a Bluetooth icon. Turn it on and connect to your phone's Bluetooth to use it. Below are the functions of car Bluetooth: 1. Automatic mobile phone recognition: It can connect to your phone without cables or phone holders. The owner can control the phone without touching it, even keeping both hands on the steering wheel, and use voice commands to answer or make calls. Users can conduct calls through the car's audio system. 2. Improved call quality: Equipped with advanced digital signal processors and voice devices, it works in any harsh environment, eliminating background noise and echoes, ensuring both parties enjoy high-quality call effects, with an effective range of 10 meters.
3
0
Share

What is the displacement of 1.6L?

1.6L refers to a displacement of 1.6 liters. Displacement is the volume of fluid inhaled or exhausted per stroke or cycle. Currently, automobile engines have only two intake methods: naturally aspirated and turbocharged. A car engine with a displacement of 1.6L indicates that the engine's intake method is naturally aspirated. If a car engine has a displacement of 1.6T, it means the engine's intake method is turbocharged. The working volume through which the piston moves from top dead center to bottom dead center is called the cylinder displacement, which is one of the most important structural parameters. It represents the size of the engine more accurately than bore diameter and the number of cylinders. Many indicators of the engine are closely related to displacement.
13
3
Share

What is the function of an automatic transmission clutch?

The functions of an automatic transmission clutch are: 1. To allow gradual engagement between the engine and transmission, ensuring smooth vehicle startup; 2. To temporarily disconnect the link between the engine and transmission for easier gear shifting and reduced shifting impact; 3. To serve as a disengagement mechanism during emergency braking, preventing overload in the transmission system and other drivetrain components, thereby providing protective effects. The three key operating principles for clutch operation are: quick initial release, slow mid-stage release, and coordinated final engagement. When lifting the clutch pedal, follow the "quick-slow-coordinated" operation sequence. During startup, depress the clutch pedal decisively in one swift motion to achieve complete clutch disengagement.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.