···
Log in / Register

What tires are used on the Haval H7?

3 Answers
VonFernando
08/31/25 6:45am
Haval H7 is equipped with 235/55R18 Kumho tires; Kumho Tires has a complete production line, covering passenger car tires, commercial vehicle tires, high-tech tires, and other categories. Precautions for replacing tires on Haval H7: 1. Choose the right tires. The specifications of the tires must match the previous ones and must be the same as the other tire on the same axle, such as speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. 2. The valve stem should also be replaced. This is because after replacing the tires, the aging cycles of the new tires and the valve stem are different. During the new tire cycle, the valve stem may develop issues that are hard to detect, so it's best to replace the valve stem at the same time as the tires. 3. Installation direction and inflation. If using the original factory tires, follow the manufacturer's installation requirements. If using non-original tires, generally the side with the production date should face outward. If they are directional tires, the arrow on the wheel should align with the direction of the car's forward movement during installation.
Was this review help?
18
0
Share
Charlotte
09/13/25 3:08am
The Haval H7 usually comes standard with Goodyear tires, sized at 225/65 R17 or 245/60 R18, with specific models varying by configuration. I've seen the base model equipped with Goodyear Assurance series in 225/65 R17, while higher trims may feature Pirelli Scorpion Verde in 245/60 R18. These numbers represent tire width, aspect ratio, and wheel diameter, directly impacting stability and fuel consumption. When selecting original tires, manufacturers balance SUV load capacity and comfort—225mm width adapts to various road conditions, and a 65 aspect ratio indicates moderate sidewall height, reducing damage risk on rough roads. For upgrades, switching to Michelin Primacy SUV can enhance noise reduction, but ensure the size matches the wheel to avoid odd handling. On highways, these standard tires offer good grip; maintaining tread depth above 1.6mm during checks can extend their lifespan.
Was this review help?
17
3
Share
Expand All
MacLucy
10/27/25 3:56am
I drive a Haval H7 myself and feel that tires are really crucial. The original ones were Goodyear or similar brands with size 225/65 R17, which provided good grip on long-distance drives but were a bit slippery on muddy roads. In rainy conditions, the wet performance was just average, so after switching to Michelin CrossClimate, it became noticeably quieter and more fuel-efficient. A reminder to car owners: don’t just stick with the factory options—consider your driving habits. For example, choose quiet tires if you often drive in the city, or durable ones like Pirelli if you frequently traverse mountainous areas. Changing tire sizes can affect odometer accuracy, so try to maintain a 225 width, and a 65 aspect ratio helps cushion bumps. When replacing tires, don’t cheap out by buying knockoffs online; visit a professional shop for safe installation.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

Can Alcohol Remove Oil Film from Car Windows?

Alcohol can remove oil film from glass. As a volatile liquid, alcohol is capable of removing it, although the effect is not particularly pronounced. Causes of oil film formation on car windows: Impurities and dust in the air, vehicle exhaust, oil smoke pollution, bird droppings, insect remains, or tree sap. Preventive measures: Consider applying a protective film to the car windows. This film can isolate the glass from direct contact with the air, thereby reducing oil film formation. Alternatively, using glass cleaner can provide a more thorough clean and help prevent oil film buildup to some extent. Treatment methods: Use toothpaste to remove oil film or employ specialized oil film cleaners.
16
0
Share

Is Carbon Fiber Very Strong?

Carbon fiber is an ultra-hard material that is 10 times harder than ordinary steel, second only to the hardness of diamond. Carbon fiber is formed by stacking organic polymer fibers with extremely high carbon content along the fiber bundle direction. Its exceptional resistance to shear force is not entirely due to its material properties. There is a decisive factor involved—critical voids. Here are the characteristics of carbon fiber: 1. High Carbon Content: In "pencils," a higher H index indicates higher carbon content, while a higher B index indicates higher graphite content. Naturally, those with a higher H index are harder, while those with a higher B index wear out faster. Graphite and diamond are both composed of carbon elements, but their atomic structures differ, resulting in different physical properties. However, in the material world, there is a commonality: carbon-based substances possess extremely high hardness and shear resistance. 2. Low Energy Absorption: F1 and many supercars use carbon fiber as a material for their bodies because carbon fiber is 20%-30% lighter than steel for the same volume, yet it is about 10 times harder than steel. Therefore, in F1 accidents, fatalities are not solely caused by high speeds; some are due to sharp carbon fiber fragments easily cutting through helmets and protective gear. Because of its outstanding hardness, in mass-produced civilian vehicles, carbon fiber is only permitted as a reinforcement for the main structure rather than being used extensively for exterior components. 3. Low Flame Resistance: While carbon fiber excels in physical properties, its performance in certain chemical properties is not as strong. For example, it has poor flame resistance.
16
3
Share

What motorcycles are allowed on highways?

Motorcycles with an engine displacement above 50cc are permitted on highways. Requirements for motorcycles on highways: Riders must carry all necessary documents, including a motorcycle license, valid motorcycle registration, and compulsory insurance. Helmets and protective gear must be worn, and carrying passengers is prohibited. Precautions for motorcycles on highways: Motorcycles on highways have speed restrictions. The minimum speed must not be below 60 km/h, and the maximum speed must not exceed 80 km/h. This narrow 20 km/h range can be challenging for riders who struggle with speed control, potentially leading to speeding or falling below the minimum limit.
18
0
Share

Do 4WD Vehicles Need Winter Tires?

4WD vehicles do need winter tires. Below is an introduction to the safety and materials of winter tires: Winter Tire Safety: Winter tires use a special compound to increase friction with snow and ice-covered roads, improving traction and safety on such surfaces. Winter Tire Material Selection: The tread material of winter tires is softer. The carefully formulated silica-mixed rubber compound allows for tighter contact with smooth ice surfaces, generating greater friction compared to all-season tires. This significantly enhances vehicle control and safety on slippery ice. When temperatures drop below 10 degrees Celsius, the surface of winter tires becomes even softer, providing better grip.
19
3
Share

How to Distinguish the Front and Back Sides of an Air Conditioning Filter?

The arrow direction on a car's air conditioning filter actually indicates the front and back sides of the filter. The direction of the arrow represents the airflow direction, which is also the installation direction. If the arrow points upward, that is the front side, and it should be installed facing the airflow direction. Alternatively, you can determine the front and back sides by observing the surface of the air filter. The ordinary fuzzy side is the front, facing upward toward the airflow direction, while the side with a support wire structure is the back, facing away from the airflow direction. For filters containing activated carbon, the black side facing the airflow is the front, and the white side facing away is the back. Here is some related information about air conditioning filters: 1. Replacement Cycle: The replacement cycle for a car's air conditioning filter depends on individual driving habits, external environmental conditions, and seasonal climate. Generally, for urban household cars, it should be replaced every 10,000-20,000 kilometers or once a year. If the driving environment is poor with a lot of dust, the filter may get dirty more easily, and the replacement cycle should be shortened accordingly. Additionally, the frequency of air conditioning use varies by season, so the replacement cycle may differ. During seasons with less air conditioning use, such as summer and autumn, the replacement cycle can be slightly longer. 2. Precautions: The air conditioning filter tends to accumulate a lot of dust. You can use compressed air to blow away loose dust, but never wash it with water, as this can easily damage it. Over time, the activated carbon filtration function in the air conditioning filter will diminish, so it is recommended to replace the filter at a 4S shop.
12
3
Share

Can the Control Arm Bushing Be Replaced Separately?

Car control arm bushings can be replaced separately. Causes of vehicle bumpiness during driving: If you experience steering wobble, uneven left-right steering resistance, brake-induced steering pull, excessive control arm movement, or abnormal noises when going over bumps, it indicates the control arm is damaged and should be replaced promptly. About the vehicle's lower control arm: The lower control arm, also known as the lower suspension arm, is a crucial component in vehicles. Though small in size, it plays a vital role in supporting the vehicle body. Together with shock absorbers and springs, it forms the suspension system. The control arm functions to absorb vibrations during driving, with shock absorbers working in conjunction to provide damping effects.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.