What tires are used on the Haval F5?

1 Answers
DelJayden
07/30/25 8:40am
Haval F5 has multiple models, and different models use different tires. Here are some details: 1. 2019 Guochao Edition 1.5T DCT iCool; 2019 Guochao Edition 1.5T DCT iType. 2. Both of these models use tires with the specification 235/60R18, and the front and rear tires have the same size. 3. 2019 Guochao Edition 1.5T DCT iTide; 2019 Guochao Edition 1.5T DCT iFan. 4. Both of these models use tires with the specification 235/55R19, and the front and rear tires have the same size.
Was this review help?
18
5
Share
More Forum Discussions

Do Automatic Cars Require Clutch Pedal Engagement?

Automatic transmission vehicles do not require clutch pedal engagement. There is no clutch pedal in automatic cars, as gear shifts are entirely controlled by the onboard computer. An automatic transmission eliminates the need for manual gear shifting by the driver. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions, replacing human judgment in shift timing and operation. Typical automatic transmissions feature P, R, N, D, 3, 2, and 1 gear positions: P stands for Parking, R for Reverse, N for Neutral, and D for Drive. Driving procedure for automatic vehicles: Sit in the driver's seat and adjust the seating position. Depress the brake pedal and start the vehicle using the ignition key. After startup, gently press the accelerator pedal twice to allow the vehicle systems to complete their self-check cycle. Maintain brake pedal pressure, then shift the gear selector to R position. Adjust the rearview camera to prevent collisions with rear obstacles. Release the parking brake, grip the steering wheel firmly, and gradually release the brake pedal to initiate movement. When encountering steep inclines, shift to L position (Low gear) to enhance powertrain performance. Subsequently, control the steering wheel and apply gentle pressure to the accelerator pedal to achieve acceleration.
13
5
Share

What is the parking sequence for an automatic transmission car?

Automatic transmission car parking sequence is to step on the brake, shift gears, and pull the handbrake. Below are the detailed parking sequences for automatic transmission cars and the parking methods for keyless series automatic transmission cars: Detailed parking sequence for automatic transmission cars: First, step on the foot brake to stop the car, then shift the gear from D to N, and pull the handbrake tight. Release the foot brake, but do not turn off the power, then step on the foot brake again, shift the gear from N to P, release the foot brake, and turn off the power. Parking method for key series automatic transmission cars: First, step on the foot brake to stop the car, shift the gear from D to N. Then pull the handbrake tight and turn off the engine. Release the foot brake, but do not turn off the power, step on the foot brake again, shift the gear from N to P, release the foot brake, turn the key back, turn off the power, and pull out the key. Parking method for keyless series automatic transmission cars: Without stepping on the foot brake, press the start button twice to let the car's computer system begin self-checking for at least 6 seconds. Step on the foot brake and press the start-stop button to ignite.
15
1
Share

What to Do When Unable to Contact the Owner of a Car Parked at the Entrance?

If you can't contact the owner of a car parked at the entrance, you can call 114. Here are detailed methods to contact the car owner: 1. Call 114: If the vehicle is legally driven, it is usually registered. You can then call 114, provide the specific location, color, model, and license plate number of the vehicle. At this point, 114 will directly transfer the call to the owner's phone, allowing you to communicate with the owner directly to request moving the car. 2. Call 122 or 110: 122 is a dedicated traffic hotline. You can report the vehicle's license plate number, model, color, and parking location to the traffic department, which will then notify the owner to move the car after investigation. If the obstructing vehicle is parked in an unauthorized parking spot and is uncooperative, the traffic department may directly tow the car away. 3. Call the insurance company's customer service: If the above two methods still fail to contact the owner, you can try to find out which insurance company the car's insurance was purchased from. Then, call the customer service of this insurance company and mention some issues related to insurance claims.
8
3
Share

What is the electronic tag of ETC?

ETC electronic tag refers to the OBU device, which is commonly known as the ETC device. The OBU device is mostly installed on the windshield of motor vehicles and communicates with the roadside unit (RSU) at highway toll stations via microwave heating. When the vehicle approaches the gear lever, the RSU detects the signal from the OBU and automatically opens the gear lever, achieving the effect of automatic control system driving. ETC installation process: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly light up. The OLED screen will display "Tag Invalid" and "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation position. Press it with your hand for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the front glass, ensuring the chip is inserted into the OBU device.
15
5
Share

Will Pouring Water into the Exhaust Pipe Damage the Car?

Pouring water into the exhaust pipe will not damage the car. However, water entering the exhaust pipe can cause blockages, leading to poor exhaust flow and potential engine stalling. The following are methods for maintaining the exhaust pipe: 1. Regularly inspect the exhaust pipe: Generally, a comprehensive inspection of the exhaust pipe can be costly, so it's advisable to visit a regular repair shop for an initial check. The main purpose is to identify any damage to the exhaust pipe. If any cracks are found, immediate repairs are necessary to avoid affecting normal vehicle operation. 2. Prevent the muffler from rusting: Since the muffler is located in the middle of the exhaust system, any issues with it can affect the entire exhaust system. The primary preventive measure is to avoid water entering the muffler. During rainy days or when washing the car, be cautious to prevent water from entering the muffler. If water accidentally enters, start the engine and let it idle for about 10 minutes to expel the accumulated water. 3. Prevent exhaust pipe leaks: When installing the muffler, ensure it is properly and securely installed to avoid leaks. A leaking muffler can cause excessively loud exhaust noises and yellowing at the muffler's joints. Additionally, avoid driving at low gears with heavy loads, as this can cause varying degrees of damage to both the engine and the muffler.
20
4
Share

What are the forward and reverse gears in an automatic transmission?

In an automatic transmission, forward and reverse gears are represented by the D (Drive) and R (Reverse) positions. The "R" on the gear selector stands for Reverse, which is used for backing up. The "D" stands for Drive, indicating the forward gear. Here's an introduction to the various gear positions in an automatic transmission: Common automatic transmission gear positions include L, B, P, R, N, D, and S. The L position is the low gear, used when climbing hills to maintain high engine RPM at low speeds. The B position is the brake gear, used when descending long slopes. Engaging this gear activates engine braking, preventing overheating of the brake pads from prolonged use of the service brakes and avoiding potential accidents. The P position is the parking gear. When parking, the gear should be placed in P to engage the parking brake and prevent the vehicle from rolling. The R position is the reverse gear, used when backing up. However, R should only be engaged when the vehicle is completely stopped to avoid severe damage to the transmission. The N position is the neutral gear, used for brief stops such as waiting at traffic lights. The D position is the drive gear, used for normal forward movement. The S position is the sport mode, where the transmission freely shifts based on current speed and throttle input, though with a slight delay in shifting.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.