···
Log in / Register

What tires are used on the Geely Emgrand GS?

3 Answers
McLucas
07/29/25 11:26am
Giti Comfort 228 V1 tires are used on the Emgrand GS, with specifications of 225/50R17, emphasizing comfort and durability. Giti, an international tire manufacturing company headquartered in Shanghai, operates seven factories across five strategic cities in China. Giti adopts a multi-brand strategy, offering a comprehensive and high-quality product range to meet market demands. With North America and Europe as its primary export markets, Giti products are sold in over 100 countries and regions worldwide. As one of China's largest international tire manufacturers, Giti ranks 14th globally in sales. The key to Giti's success lies in adhering to fair business principles and investing in talent, product development, and equipment technology. For the Emgrand GS tires in daily use, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread wears out completely, it loses its water drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing tire pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear from dragging against the ground.
Was this review help?
17
1
Share
OCatherine
08/13/25 6:55pm
I remember driving a Geely Emgrand GS for several years. The car came with Atlas tires from the factory, specifically the Batman A51 model, usually in sizes like 205/60 R16 or 215/55 R17, depending on the trim level. The driving experience was decent—not too noisy and fuel-efficient, but the wet grip was slightly lacking. I once felt a bit unstable when turning on wet roads. In terms of lifespan, the tread started wearing after about 20,000 to 30,000 kilometers, so I recommend regular checks on tire pressure and rotation. Switching to a premium brand like Michelin might offer quieter performance, but the factory tires are cost-effective and suitable for daily commuting. During every maintenance session, I always asked the mechanic to inspect the tire condition to ensure safety, which I believe is crucial for extending their lifespan.
Was this review help?
11
4
Share
Expand All
NadiaMarie
10/08/25 4:17am
From the perspective of tire characteristics, the Geely Emgrand GS typically comes standard with Atlas brand tires, specifically the Batman series, with the most common size being 205/60 R16. These tires offer good wear resistance and durability, capable of lasting 40,000 to 50,000 kilometers without issues, though their comfort level is average, and the shock absorption performance isn't outstanding. While driving, I've noticed that the grip is sufficient on dry roads, but they tend to slip in wet conditions, especially during hard braking, which increases stopping distance. For those looking to upgrade, matching-sized Dunlop or Bridgestone tires can be chosen to enhance comfort, though they cost about twice as much. The factory configuration is quite suitable for an economy car, helping to reduce overall maintenance costs. Just remember not to overload or take sharp turns at high speeds, and maintain proper tire pressure.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What are the precautions during the break-in period of a new car?

Precautions during the break-in period of a new car: 1. Warm up before starting - turn the key to the second position and wait 5 to 10 seconds before starting the engine; 2. Avoid long-distance trips - prolonged continuous operation of the engine during long trips can accelerate component wear; 3. Initial maintenance - regularly check engine oil, coolant, and battery electrolyte levels during the break-in period, and top up immediately if any are low; 4. Use high-quality gasoline - the engine oil used should not be of a lower grade than specified by the manufacturer, and avoid adding anti-wear additives to prevent insufficient break-in despite sufficient mileage.
1
4
Share

How High Can a Car Jack Lift?

Mechanical jacks can typically lift to a maximum height of approximately 600 millimeters, including both the base and the extension. The height of a jack is divided into three parts: minimum height, auxiliary height, and maximum height. Here are the specific details: 1. Minimum height: This refers to the height from the top of the bearing seat to the ground when the jack is not in use, representing the hydraulic condition. 2. Auxiliary height: This refers to the additional height achievable by rotating the threaded bearing seat from its end, with the highest point after rotation called the auxiliary height. 3. Maximum height: This is the total height achieved when the jack is extended to its highest point, and if there is an auxiliary height, it is also rotated to its maximum. The sum of these two heights gives the maximum height.
6
1
Share

What Oil Should a Cadillac Use?

Cadillac vehicles typically use engine oil with a viscosity of 5W30. Given that most Cadillac models feature high-performance, turbocharged engines, it is recommended to use fully synthetic oil. Among fully synthetic oils, 5W30 offers a good balance of cost and performance, providing excellent low-temperature startup lubrication and high-temperature oil film strength that is nearly comparable to 5W40. It also delivers strong power performance and contributes to fuel efficiency. Taking the Cadillac CT5 as an example, this model measures 4924mm in length, 1883mm in width, and 1453mm in height, with a wheelbase of 2947mm. It is a 4-door, 5-seater sedan equipped with a 10-speed automatic transmission.
11
4
Share

What to do if the clutch pedal becomes very hard halfway and cannot be pressed down?

If it is a hydraulic clutch, it is likely that the pressure plate in the transmission is damaged. Replacing it with a new pressure plate should resolve the issue. If it is a cable-operated clutch, the clutch cable may be too tight. Adjusting it to be looser or replacing it with a new cable should fix the problem. For example, if the master cylinder return spring is broken and stuck, or the rubber cup is swollen, it is recommended to replace the clutch master cylinder with a new one.
5
3
Share

Can Perfume Be Placed in a Car?

Perfume should not be placed in a car. Here is an introduction to car perfumes: 1. Introduction: Car perfume refers to decorative perfumes placed inside a car, usually stored in exquisite crystal perfume holders. With their attractive appearance and pleasant fragrance, car perfumes appeal to car owners. 2. Types: The common car perfumes on the market mainly include aerosol, liquid, and solid types. Aerosol car perfumes are mainly composed of fragrance and containers, which can mask certain specific odors in the car. 3. Identification: The quality of a good car perfume can be judged by its scent. A good car perfume typically has a mild fragrance, and even if it is strong, it should not be overpowering or irritating, providing a comfortable smell.
13
5
Share

What to Do When the Clutch Suddenly Becomes Hard to Press?

Use the front part of the sole to press down, adjust the seat forward, try to wear flat shoes, press with the ball of the foot, and support with the heel, so that more force can be applied. Hydraulic clutch: The pressure plate in the transmission is damaged, replace it with a new one; Cable clutch: The cable is too tight, replace it with a new one. Try to wear flat shoes, press with the ball of the foot, and support with the heel, so that more force can be applied.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.