What tires are used on the Dongfeng Fengguang ix5?

What Causes Frequent Low Tire Pressure in One Tire?

The reasons for frequent low tire pressure in one tire may include: a leaking valve stem; wheel rim deformation leading to reduced tire sealing performance; the tire being punctured by a hard object while driving; insufficient initial inflation pressure; or the tire not having its pressure checked and properly topped up for an extended period. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and alignment issues, compromising driving safety; Excessive movement of tire components results in abnormal heat generation due to over-compression; Degrades the functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim leading to bead damage and abnormal wear; Multiplies friction with the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may then cause a blowout; Increases tire body deformation, making the sidewalls prone to cracking, inducing flexing movements that generate excessive heat, accelerating rubber aging, cord fatigue, and breakage, while also enlarging the tire's contact area and hastening shoulder wear.

4

0

Share

Is the 1.5L Mazda 3 Axela Powerful Enough?

Mazda 3 Axela 1.5L engine provides sufficient power. Below are details about the 1.5L engine's performance and other related specifications: Mazda 3 Axela 1.5L Engine Performance: The Mazda 3 Axela is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117 PS, a maximum power output of 86 kW, and a peak torque of 148 Nm. It is paired with a 6-speed manual transmission. Other Related Specifications: The Mazda 3 Axela is classified as a compact car, with body dimensions of 4662mm in length, 1797mm in width, and 1445mm in height, along with a wheelbase of 2726mm. It has a fuel tank capacity of 50 liters. The front suspension features a MacPherson strut independent suspension, while the rear suspension utilizes a torsion beam non-independent suspension.

2

Share

Is the Skoda Rapid China 6 compliant?

Yes. The dimensions of the new Skoda Rapid are: 4312/1706/1475mm, with a wheelbase of 2603mm. It is powered by a 1.5L engine that meets China 6 emission standards, delivering an output of 112 horsepower. The transmission system is matched with a 5MT and 6AT gearbox. The side design of the car is relatively simple, with the window design being more satisfactory and attractive. The lines in the door area add a certain sense of strength, and the multi-type wheel design is more solid. The floating spoiler design at the rear enhances aesthetics, while the antenna design on the upper side helps reduce driving resistance. The spliced headlight design is more elegant, and the letter logo design increases recognizability. The fog lights coordinate well with the polygonal exhaust pipe at the bottom. This adds a certain sense of harmony. The interior design is relatively simple, with a practical dashboard design. The steering wheel design improves handling feel, and the air vents are decorated with slender silver strips, adding a touch of fashion. The adjustable seat design enhances riding comfort.

5

2

Share

What is the emission standard of Changan CS35?

All 17 models of Changan CS35 currently on sale comply with the China V emission standard. Here are the details about China V: China V Vehicle Transfer Information: After the implementation of the China VI emission standard, the transfer of locally registered used China V vehicles remains unaffected. For regions where the China VI emission standard has been implemented, used vehicles that do not meet the China VI standard can still be transferred normally. Moreover, the current national policy is to gradually remove restrictions on the cross-region transfer of used vehicles, with many cities already lowering their entry standards. Therefore, there is no need to worry about cross-region used vehicle transfers. China V Registration Information: Locally registered China V vehicles can be transferred normally, while out-of-town China V vehicles generally cannot be transferred to local regions. Many areas nationwide implemented the China VI standard on July 1st. After this date, new vehicles meeting only the China V emission standard cannot be registered in cities and regions where the China VI standard has been implemented. However, many provinces have not yet adopted the China VI standard, meaning new China V vehicles can still be registered normally in these cities.

20

5

Share

Is the Electronic Parking Brake Still Necessary When the Mercedes-Benz is in P Gear?

When the Mercedes-Benz is in P gear, it is necessary to use the electronic parking brake. There is a significant difference between the vehicle's P gear and the electronic parking brake. The electronic parking brake, also known as the parking brake, prevents the vehicle from rolling by applying the brakes. The P gear is a locking mechanism of the transmission. Prolonged use of the P gear without engaging the electronic parking brake can affect the transmission. Below are detailed explanations regarding the P gear and the electronic parking brake: Correct Shutdown Sequence for Mercedes-Benz: When shutting down the vehicle, first ensure the vehicle is stationary, shift to P gear, engage the parking brake, then turn off the engine, and finally exit and lock the vehicle. Generally, there is no strict order between engaging the parking brake and shifting to P gear when shutting down; either can be done first. Function of the Electronic Parking Brake: The electronic parking brake is part of the Electronic Parking Brake System (EPB). The EPB integrates temporary braking during driving with long-term braking after parking, and it achieves parking braking through electronic control. The basic parking function of the electronic parking brake extends to the Auto Hold function. The application of Auto Hold technology allows drivers to avoid prolonged braking when the vehicle is stationary. Activating the Auto Hold function can prevent unnecessary vehicle sliding.

15

4

Share

Where is the intake port located on a motorcycle?

Different types of motorcycles have different intake port locations. Taking the common cross-type as an example, it is usually located on the left or right cover, and some are under the seat cushion or fuel tank. The lower fender is usually behind the front fender; if it is above the left side of the engine or under the seat cushion, it is usually a scooter. The intake system of a motorcycle includes the air filter, intake manifold, and intake valve mechanism. After the air is filtered by the air filter to remove impurities, it flows through the carburetor to mix with gasoline, enters the intake manifold through the intake passage, and then enters the cylinder through the intake valve for ignition and combustion, generating power. Reasons for insufficient intake in motorcycles: The air filter is too dirty, and the filter element is clogged, causing the cylinder intake port to be blocked. The piston ring wear gap is too large, leading to air leakage, reducing the compression ratio and power. Moreover, the motorcycle consumes a lot of oil and requires frequent oil replenishment. Using low-quality gasoline: This situation is relatively rare, and fuel must be refilled at regular gas stations. Severe piston ring wear in motorcycles causes excessive oil burning, leading to carbon deposits in the exhaust pipe and blocked smoke. Opening the motorcycle throttle and forgetting to close it after starting can result in an overly rich combustible mixture. Additionally, unauthorized adjustment of the motorcycle's ignition angle, causing the ignition time to be too early or too late, can also lead to insufficient power.

4

1

Share

What tires are used on the Dongfeng Fengguang ix5?

What Causes Frequent Low Tire Pressure in One Tire?

Is the 1.5L Mazda 3 Axela Powerful Enough?

Is the Skoda Rapid China 6 compliant?

What is the emission standard of Changan CS35?

Is the Electronic Parking Brake Still Necessary When the Mercedes-Benz is in P Gear?

Where is the intake port located on a motorcycle?

What engine does the Yeti use?

What is the fuel tank capacity of the New Baojun RS3?

How to Replace the Key Battery for a Maserati?

Which year did the Mercedes-Benz C-Class undergo a facelift?