What tires are used on the Audi A4L?

1 Answers
DelAugust
07/30/25 2:28am
The Audi A4L uses 225/50R17, 245/35R19, and 245/45R18 tires. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. Taking the 2020 Audi A4L as an example, it is a mid-size car with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, with a wheelbase of 2908mm. The 2020 Audi A4L features a five-link independent suspension both in the front and rear. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 270Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
Was this review help?
5
1
Share
More Forum Discussions

Is the light on or off when the internal circulation is activated?

The internal circulation light being on indicates that the internal circulation is activated. Here is an introduction about internal circulation: 1. When encountering traffic jams, it is essential to activate the internal circulation to effectively prevent harmful exhaust gases from entering the vehicle. 2. For short-distance driving, it is also recommended to use internal circulation to reduce fuel consumption; however, for long-distance driving, external circulation should be activated to allow fresh air to enter, ensuring sufficient oxygen and preventing accidents caused by oxygen deficiency. 3. If the interior temperature is too high, activating external circulation can quickly lower the temperature, expel hot air, reduce the burden on the air conditioning system, and help eliminate harmful gases inside the vehicle, such as formaldehyde.
1
1
Share

Why Does the Car Emit a Strong Gasoline Smell When First Started?

If the car emits a strong gasoline smell upon starting, which disappears after the engine warms up, it is generally a normal phenomenon. The details are as follows: 1. During a cold start, the water temperature and exhaust pipe temperature are relatively low. At this time, the air-fuel mixture is richer, so some of the mixture does not burn completely and is expelled through the exhaust pipe. This results in a noticeable gasoline smell, which is normal. 2. Especially in winter, when the outside temperature is very low, the car cannot reach its normal operating temperature immediately after starting. The car's computer will then increase the fuel injection volume based on the intake air temperature and water temperature signals. The increased fuel injection, combined with a small amount of unburned fuel vapor being expelled, leads to a stronger gasoline smell.
13
3
Share

What does zone mean on a car?

Zone refers to temperature zone control, which allows setting different temperatures in different areas of the car. Here are the specific details: 1. A zoned air conditioning system means that the air conditioning temperature can be adjusted in different areas within the car. The simplest zoned air conditioning system divides the car into left and right zones, while more complex systems can divide the car into four zones, allowing rear passengers to adjust the temperature on their respective sides. To identify how many zones an air conditioning system has, simply count the number of automatic temperature adjustment knobs. 2. If it's a dual-zone automatic air conditioning system, there are two temperature adjustment knobs on the front console, each labeled with temperature numbers. The driver and front passenger can adjust their own temperatures separately, creating different temperature settings on the left and right sides of the cabin.
3
5
Share

Can You Still Drive with a Broken Water Pump?

You cannot continue driving with a damaged car water pump and should have it repaired as soon as possible. There are two main scenarios when a car water pump is damaged: 1. Bearing or seal ring failure. This can cause the timing belt to become soaked and damaged, leading to a series of engine malfunctions, or even engine seizure. 2. Coolant leakage. Rapid loss of coolant will cause the engine temperature to rise, damaging various components. In severe cases, it can also lead to engine seizure or even complete engine failure. 3. Additional Information: Centrifugal water pumps are widely used in car engines. Their basic structure consists of the pump housing, connecting plate or pulley, pump shaft and bearings or integrated shaft bearings, pump impeller, and sealing devices, among other components. They are a crucial part of a vehicle.
7
1
Share

What is the proper tire pressure in summer?

In summer, the tire pressure is generally most suitable when it is about 0.1 bar lower than the standard pressure. The standard tire pressure is 2.4-2.5 bar. The exact pressure should be determined based on the vehicle model. Here are the detailed explanations: 1. In summer, high temperatures can cause tires to burst if the pressure is too high. When inflating tires in summer, use a pressure gauge to check the pressure to avoid over-inflation and tire rupture. 2. Excessive tire pressure can overstretch and deform the tire cords, reducing the elasticity of the tire body. This increases the load on the car while driving, potentially causing internal cracks and blowouts upon impact. Additionally, high pressure accelerates tread wear and reduces puncture resistance.
14
1
Share

What Are the Hazards of Oil Emulsification?

The hazards of oil emulsification: Oil emulsification will reduce various performance indicators of the oil, not only affecting the vehicle's power performance and fuel economy but also exacerbating engine wear. Over time, this can easily lead to bearing seizure and even complete engine failure. Causes of oil emulsification: 1. Cylinder liner damage: This is likely due to cracks in the cylinder liner, allowing coolant to seep directly into the oil pan through the cylinder wall. Alternatively, it could be due to aging of the cylinder liner sealing ring, necessitating a check of the seal. 2. Engine water plug leakage: If the engine water plug is severely aged, it will inevitably leak. In such cases, coolant can directly mix into the oil pan, making regular inspection of the water plug crucial. 3. Radiator damage: Additionally, if the oil cooler ducts are damaged, it can also cause oil to mix with water. 4. Cylinder head gasket damage: Due to the long-term high-pressure state of fuel in the cylinder, the cylinder liner may become damaged, causing the oil and coolant passages to interconnect, leading to oil emulsification.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.