What tires are used in the Classic Sylphy?

2 Answers
RemingtonRose
07/24/25 1:53am
The Classic Sylphy uses Maxxis MA-202 tires with a tire size of 185/65/R15. Maxxis International is one of the largest and most respected tire companies in the world. It continuously provides tire products for passenger cars, light trucks, bicycles, motorcycles, ATVs, trailers, go-karts, and lawn mowers, selling to more than 170 countries with business operations across Asia, Europe, and the Americas. For the Classic Sylphy's tires in daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-skid functions, significantly reducing the car's performance. Small cracks may seem minor but can be a hidden danger for tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park the car near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this action will accelerate tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure will increase. In such cases, stop to allow the tires to cool down naturally. It is strictly forbidden to release air to reduce pressure or splash water to cool down, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.
Was this review help?
5
3
Share
Pat
08/10/25 9:27pm
I've been driving the classic Sylphy for several years, and the factory-fitted tires are usually Bridgestone Ecopia EP150 or similar models, focusing on fuel efficiency and comfort. They perform quietly on city roads with minimal vibration. For daily driving, maintaining tire pressure between 2.3-2.5 bar is optimal, which helps extend tire life and save fuel consumption. Checking the tire pressure quarterly is sufficient. The grip of these tires is decent, with good safety performance in rainy conditions. However, after driving 40,000 kilometers, the tread may wear shallow, and replacement should be considered. Don't forget to rotate the tire positions during maintenance for even wear and longer durability. When replacing tires, it's recommended to choose the same series or similar economical tires, priced around 600 yuan per tire, matching the Sylphy's lightweight design for a worry-free and practical experience.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What does autohold mean in a car and how to use it?

autohold refers to the automatic parking system. By pressing this button while braking, it can also prevent the car from rolling back on slopes. The following are the functions of autohold and how the automatic parking system works: Functions of autohold: Autohold is essentially an automatic braking function. When autohold is activated, there's no need to pull the handbrake, enhancing driving safety. How the automatic parking system works: The brake management system controls the braking of all four wheels through the extended functionality of the electronic parking brake (EPB). In other words, the automatic parking system is an extended feature of the electronic parking brake (EPB), controlled by the ESP component.
3
1
Share

Which city does the Su F license plate belong to?

Su F license plate belongs to Nantong City, Jiangsu Province. The license plate codes for various cities in Jiangsu Province are: Su A Nanjing, Su B Wuxi, Su C Xuzhou, Su D Changzhou, Su E Suzhou, Su F Nantong, Su G Lianyungang, Su H Huaian, Su J Yancheng, Su K Yangzhou, Su L Zhenjiang, Su M Taizhou, Su N Suqian. Nantong is a prefecture-level city in Jiangsu Province, located in the northern wing of the Yangtze River Delta in the southeast of Jiangsu. It is the northern gateway city of the Shanghai metropolitan area and one of China's first 14 coastal cities to open to the outside world. Nantong borders the Yellow Sea to the east and faces the Yangtze River to the south, with Shanghai and Suzhou within sight, and borders Taizhou and Yancheng to the west and north.
4
3
Share

Can transparent tape really open car windows?

Tape opening car windows is not credible, after all, modern car anti-theft systems have been upgraded. If tape could easily pull open car windows, it would embolden theft gangs to commit crimes rampantly. Here is the relevant content introduction: 1. Ordinary organic solvents: It is difficult to pull car glass down with tape, and improper handling may cause the glass to be stained with adhesive residue from the tape. The adhesive used in ordinary transparent tape is made of common organic solvents, which can turn yellow in a short time, leaving marks on the window and affecting its appearance. 2. Tape window lowering method: The tape window lowering method is also not suitable for today's car window glass structure. In terms of the basic principle of car window lift mechanisms, forcibly pulling out laminated glass may cause the motor wire to break or even damage the door frame.
3
3
Share

Are low beams considered headlights or small lights?

Low beams are small lights. Below is relevant information about low beams: 1. Definition: Low beams have an illumination range of approximately 30-40 meters. Experiments show that when driving at 55 km/h at night, if you immediately apply the brakes upon detecting a situation, the stopping distance is exactly 30 meters. This means that if you stop immediately upon detecting an object within the low beam's illumination range, there will be no gap between the vehicle and the object. 2. Function: Although low beams have an illumination range of about 30 meters, they feature a very distinct beam cutoff line. Most measured vehicle low beams illuminate 30-40 meters, with the beam cutoff line located at about 12-18 meters. The area in front of the beam cutoff line is brightly lit, allowing clear object recognition, and a clearly visible 2-3 meter diameter illuminated area on the ground. The area from the beam cutoff line to 30-40 meters mainly relies on ground-reflected light. In this area, brightly colored objects can be distinguished, but stationary dark-toned objects on the road are difficult to detect.
20
5
Share

What to Do When the Interior Roof Fabric of a Sedan Falls Off?

The interior roof fabric of a sedan can be reattached using polyurethane adhesive. Here is some relevant information about the interior roof fabric of a car: 1. Function: The car roof fabric is an important component of the vehicle's overall roof, primarily serving to enhance the interior decoration. Additionally, the composite fabric of the car roof can improve insulation and heat resistance from the outside, reduce interior noise, and enhance sound absorption. It also improves the comfort and safety of passengers. 2. Material: Textiles account for more than 50% of the materials used in car roof fabrics. Automotive textiles mainly include woven fabrics, knitted fabrics, non-woven fabrics, and fiber composites, with knitted and woven fabrics being the two main categories.
17
0
Share

How to turn on the rear air conditioning in GL8?

Press the button on the air volume adjustment knob, then select the wind speed when the light is on, and the rear air conditioning will turn on. Press it again to turn off the light, which adjusts the front air conditioning. The cooling function of the Buick GL8 air conditioning is controlled by the AC switch on the air conditioning control panel. When the air conditioning is turned on, the AC switch is activated, the compressor's electromagnetic clutch engages, and the compressor starts working. Related explanations are as follows: 1. Cooling principle: The compressor compresses the refrigerant into a high-temperature and high-pressure gas, which then dissipates heat to the air at the condenser in front of the car, condensing into a high-pressure liquid. After being filtered and dried by the receiver-drier, it passes through the expansion valve, where it is throttled and depressurized into a low-pressure liquid, finally reaching the evaporator inside the car. The refrigerant evaporates and absorbs heat in the evaporator, achieving cooling. 2. Temperature control: Theoretically, the most comfortable temperature for the human body is between 20-25°C. Temperatures above 28°C will feel stuffy, while temperatures below 14°C will feel too cold. Therefore, it is advisable to keep the in-car temperature between 18°C and 25°C. Choosing an appropriate air conditioning temperature is also an important aspect of air conditioning maintenance.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.