What tire specifications are required for the ix35?

What are the steps for making a U-turn in Subject 3?

Here are the operational steps for making a U-turn in Subject 3: 1. Identify that the next task is a U-turn and, based on the actual driving conditions, decide whether to change lanes to the U-turn lane; 2. When a lane change is needed, turn on the left turn signal (for more than 3 seconds), check the left rearview mirror and look back to ensure it is safe behind, then change to the leftmost lane and turn off the turn signal; 3. Upon hearing the voice prompt "U-turn ahead," turn on the left turn signal, reduce speed and shift down, preferably to 1st gear; 4. When approaching the intersection, observe the traffic conditions on both sides and choose an appropriate moment to quickly turn the steering wheel fully to the left; 5. After completing the U-turn into the new lane, as the vehicle body is about to straighten, return the steering wheel to the center, turn off the turn signal, and finally adjust the steering wheel appropriately based on the vehicle's position.

3

5

Share

What are the tips for pulling over within 30 centimeters in Subject 3?

Here are the tips for pulling over within 30 centimeters in Subject 3: 1. After hearing the voice prompt "Pull over," downshift and slow down, keeping the speed below 20km/h. Observe the traffic behind and to the right through the interior and exterior rearview mirrors to confirm if it is safe to pull over. 2. Once safety is confirmed, turn on the right turn signal. The right turn signal must remain on during the pulling-over process. If the turn signal turns off automatically during the operation, immediately turn it back on. 3. When one-third of the right front of the car aligns with the edge line, the right wheel is approximately 30cm away from the edge line. 4. Pay attention to the vehicle and adjust the body to stop within 30cm of the road edge line. 5. After stopping, shift to neutral and engage the handbrake. Upon hearing the voice prompt "Exam passed," check for any oncoming traffic from behind through the left rearview mirror. Confirm it is safe, then unfasten the seatbelt and exit the vehicle.

1

3

Share

What is the difference between original 5w30 and 5w40 engine oil?

The difference between 5w30 and 5w40 engine oil lies in their viscosity and high-temperature resistance. The number before the W represents the pour point temperature, which essentially indicates the freezing point temperature. For 5W oil, the corresponding freezing point temperature is -30℃, while other common grades include 0W at -35℃, 10W at -25℃, and 15W at -20℃. The number after the W represents the kinematic viscosity of the oil at 100℃, with higher numbers indicating higher viscosity. Below are some considerations when selecting engine oil: 1. Choose engine oil based on the requirements of the engine. It is unnecessary to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. 2. It is advisable to opt for multi-grade oil whenever possible. Multi-grade oil offers benefits such as cost savings, longer lifespan, and high efficiency, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker prematurely and exhibit lower oil pressure compared to conventional oil, both of which are normal phenomena.

16

2

Share

What to Do When the Malfunction Light Comes On After Adding 92 Gasoline?

If the malfunction light comes on after adding 92 gasoline, it indicates a problem with the gasoline quality. It is recommended to promptly drive the car to a repair shop or a 4S store for inspection and treatment, otherwise it may affect the normal operation of the vehicle. Below are the reasons why the malfunction light may come on after refueling: 1. The air filter is too dirty, causing the malfunction light to come on after refueling. A dirty air filter leads the oxygen sensor to determine insufficient air intake, while the octane number of the new fuel changes. During the combustion process, the air-fuel ratio undergoes significant changes. The ECU detects abnormal ignition timing during operation, triggering the engine malfunction light. 2. The gasoline used does not meet the engine's fuel standards. While changing the fuel may not cause immediate issues with the car or engine, it can increase fuel consumption. If the added gasoline is contaminated, it may affect the fuel system's flow or even clog it. In such cases, replacing the air filter won't resolve the issue, and an inspection at a 4S store is necessary.

19

2

Share

When Can I Check My Subject 2 Test Results?

After passing the Subject 2 driving test, the results are generally uploaded the next day, and you can usually check your test scores online by the following day. Whether you pass or fail, you can view your results online. If you are unable to check your test results online for several days, you can contact your driving school for assistance. To check your Subject 2 test results, follow these steps: Visit the homepage of the [Traffic Safety Comprehensive Service Management Platform] - select your region - go to the [Personal Login] page - enter your username (usually your ID number) and password (if forgotten, you can reset it via mobile verification) - log in - under [My Homepage], you will see [Student Information], where your test scores for each subject will be displayed under [Exam Information]. Additionally, after completing the Subject 2 test, the coaching car's voice announcement system will notify you. If you pass, the system will announce "Congratulations on passing the Subject 2 test." If you fail, the system will instruct you to return to the starting point to retake the test.

6

5

Share

How to Solve the Problem of Failing Vehicle Emission Test?

There are 4 solutions to address the issue of failing vehicle emission test: 1. Replace or clean the spark plugs, as carbon deposits on spark plugs can lead to incomplete combustion of gasoline: Spark plugs are crucial components responsible for igniting the engine. Over time, carbon buildup and aging of spark plugs can cause incomplete combustion of gasoline, resulting in emissions that fail to meet standards. 2. Replace the oxygen sensor if it is damaged and unable to detect whether the exhaust meets standards: The primary function of the oxygen sensor is to measure the oxygen concentration in the engine exhaust. By detecting the oxygen content in the exhaust, it determines whether the gasoline is fully burned. 3. Replace the three-way catalytic converter, as prolonged lack of cleaning can lead to clogging from accumulated impurities, rendering the converter ineffective: The main role of the three-way catalytic converter is to filter and purify exhaust gases. If not cleaned for a long time, accumulated impurities can clog the converter, causing it to lose its function and resulting in non-compliant emissions. 4. Clean the carburetor, as long-term neglect can cause incomplete gasoline atomization: The carburetor's function is to atomize gasoline, ensuring it burns more completely. If the carburetor is not cleaned for an extended period, it may lead to incomplete atomization of gasoline. This results in incomplete combustion within the engine, not only causing significant carbon buildup but also leading to emission failures.

8

1

Share

What tire specifications are required for the ix35?

What are the steps for making a U-turn in Subject 3?

What are the tips for pulling over within 30 centimeters in Subject 3?

What is the difference between original 5w30 and 5w40 engine oil?

What to Do When the Malfunction Light Comes On After Adding 92 Gasoline?

When Can I Check My Subject 2 Test Results?

How to Solve the Problem of Failing Vehicle Emission Test?

How Many Types of Vehicle Drivetrains Are There?

Why are steering wheels on the right side in foreign countries?

What does the battery indicator light in a car mean?

What are the differences between the Regal Elite and Luxury editions?