···
Log in / Register

What tire model does the CR-V use?

6Answers
KevinAnn
07/29/2025, 10:07:19 PM

The Honda CR-V comes standard with 225/65-R17 size tires (225/60-R18 for the four-wheel-drive premium version). The redesigned new CR-V is equipped with Michelin LATITUDE-Tour series tires, which are characterized by ultra-long mileage and wet-road safety. These off-road tires ensure high mileage performance even under challenging conditions such as heavy vehicle loads, rapid braking, hill climbing, and cornering. Here is some information about the Honda CR-V: 1. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. The 2015 CR-V features a sporty and stylish design, paired with Michelin Latitude series SUV tires for excellent handling performance. 2. In terms of power: The Honda CR-V is equipped with a retuned 2.0L and 2.4L engine. The 2.4L engine offers ample power, quick acceleration, and easy overtaking, while the 2.0L engine is weaker, with slower acceleration from a standstill.

Was this review help?
110
Share
HadleyDella
08/15/2025, 04:06:38 AM

I'm a CRV owner and have been driving it for over five years. The original tire size is typically 235/60R18, but it depends on the model year. For example, higher trims after 2019 often use this size. This size is chosen to match the CRV's design, balancing comfort and fuel efficiency while providing better stability at high speeds. When replacing tires, I recommend the Michelin Primacy series—they're durable and quiet, avoiding annoying noise. Also, always monitor tire pressure, keeping it at 32-35 psi; otherwise, wear accelerates and it becomes unsafe. It's advisable to check them every two years or 30,000 km. Wet traction is super important—don't cheap out and opt for undersized tires. The car manual has detailed references, which is really handy—just flip through it.

Was this review help?
2
Share
Expand All
SamuelDella
10/21/2025, 12:22:20 AM

When driving my CRV, safety is my top concern. Using the original tire specification of 235/60R18 is best. Choosing it ensures strong grip, especially on wet roads to reduce the risk of skidding. It's recommended to switch to high-performance tires like Bridgestone Alenza, which improve braking response and shorten stopping distances. Keep tire pressure stable, maintaining it around 33 psi; check tread depth, and replace if it's below 3mm to avoid accidents. You can switch between winter and summer tires depending on the season, but for city driving in a CRV, all-season tires are sufficient, saving both money and hassle.

Was this review help?
10
Share
Expand All
VonHope
12/03/2025, 11:49:53 PM

I have to budget carefully with my CRV, choosing 235/60R18 tires and keeping the budget within 500-800 yuan per pair. Try the affordable Goodyear Assurance model—durable enough to last about 4 years. Picking the right size saves fuel and hassle; going smaller increases fuel consumption and compromises safety. Monitor the wear indicators for replacement timing—old tires get noisy and ruin the mood. Don’t skip balancing and alignment; a small investment extends their lifespan.

Was this review help?
18
Share
Expand All
DelEmery
01/24/2026, 01:13:38 AM

Tires significantly enhance the CRV's handling. The original 235/60R18 model is the most suitable, providing smooth acceleration and cornering. I prefer All-terrain types for more stability during off-road driving. Tire pressure affects the driving feel, starting normally at 32 psi. When replacing, choose Continental brand for its quietness, noise reduction, and comfort. Don't forget the wheel alignment to avoid uneven tire wear.

Was this review help?
12
Share
Expand All
DeElizabeth
04/20/2026, 12:21:50 AM

I just got a CRV and checked the manual to find out the standard tire size is 235/60R18. In the size, 235 is the width, 60 is the aspect ratio, and R18 represents the wheel size. When replacing tires, go to a professional shop to measure and match the original factory specifications to avoid choosing problematic brands like Hankook, which offers good value for money. Maintain tire pressure at 34 psi and check the wear safety points monthly.

Was this review help?
7
Share
Expand All
More Q&A

can you register a car at aaa california

No, you cannot register a car at AAA (American Automobile Association) in California. While AAA is an incredibly useful service for its members, its role in vehicle registration is limited to specific registration-related services , not the final act of registration itself. The California Department of Motor Vehicles (DMV) is the sole authority that issues vehicle registrations and titles. AAA offices in California function as a convenient alternative to the DMV for many transactions. They can save you a trip to the DMV by handling renewals for existing registrations, processing title transfers, and issuing license plates and stickers. However, they cannot complete the initial registration for a vehicle that has never been registered in California, such as a new purchase from a private party or a car brought in from another state. These more complex transactions must be done directly with the DMV. The key advantage of using AAA is bypassing the long DMV lines for eligible services. It’s a classic example of a membership benefit that pays for itself in convenience. Before you go, always check with your local AAA branch to confirm they offer the DMV services you need and to ensure you have all the required paperwork. Here is a comparison of what you can typically do at AAA versus the DMV in California: Service AAA (for Members) California DMV Initial Registration (New-to-state vehicle) No Yes Registration Renewal Yes Yes Title Transfer Yes Yes Issue License Plates/Stickers Yes Yes Replace Lost Title/Registration Yes Yes Submit Smog Certificates Yes Yes Pay Registration Fees Yes Yes Process Complex Legal Cases (e.g., bonded titles) No Yes
115
Share

can you put two different tires on a car

Yes, you can put two different tires on a car, but it is a practice that requires extreme caution and is generally not recommended for all four wheels. The safest approach for optimal vehicle handling, braking, and stability is to always use four identical tires. Mixing tires can be acceptable only in specific, temporary situations, such as replacing a single damaged tire on an all-wheel-drive (AWD) vehicle with one that has a very similar tread depth to the others, or using a temporary spare tire. The primary risks involve the vehicle's sophisticated drivetrain and safety systems. On AWD systems, significantly different tire circumferences—even a difference of 3/8 of an inch—can cause excessive wear and potential damage to the center differential or power transfer unit, as the system constantly fights against the speed difference between the axles. For all cars, mixing tire models with different grip levels, especially between the front and rear axles, can lead to unpredictable handling. For instance, placing worn tires on the rear of a front-wheel-drive car increases the risk of oversteer (where the rear of the car slides out) during cornering or in wet conditions. If you must mix tires, follow these critical guidelines: Same Axle: The two tires on the same axle (both front or both rear) must always be the same brand, model, size, and have very similar tread depth. Prioritize the Rear: If only two new tires are being installed, they should typically be placed on the rear axle. This provides more stable handling and reduces the chance of a loss of control from the rear end. Check Specifications: Ensure the load index and speed rating of any replacement tire meet or exceed the vehicle manufacturer's specifications. Scenario Recommendation Key Risk AWD Vehicle Replace with 4 identical tires. If replacing one, shave a new tire to match the tread depth of the others. Drivetrain binding and damage. FWD/REAR Vehicle (New tires on rear) Acceptable short-term. Install matching new tires on the rear axle. Improved stability; prevents oversteer. FWD/REAR Vehicle (New tires on front) Not recommended. Worn rear tires can lead to loss of control. Increased risk of oversteer. Different Tread Patterns (Same Axle) Never acceptable. Uneven braking and unstable cornering. Using a Temporary Spare For emergency use only, at low speeds and for short distances. Limited traction and handling capability. Ultimately, consulting a professional tire technician is the best course of action to assess the specific risks for your vehicle.
115
Share

can you put cold water in a car radiator

Putting only cold water in your car radiator is a temporary emergency fix, not a recommended long-term solution. While plain water transfers heat better than coolant alone, it lacks critical additives that protect your engine. In a pinch, if your car is overheating and coolant is unavailable, adding distilled water is acceptable to get you to a repair shop. However, you should flush the system and refill with the proper coolant mixture as soon as possible. Using plain tap water regularly can cause significant damage. The minerals in tap water, like calcium and magnesium, lead to scale and rust buildup inside the radiator and engine block. This corrosion can clog the narrow cooling passages, reducing efficiency and potentially causing the engine to overheat. Furthermore, water has a higher freezing point and a lower boiling point than proper coolant. In cold climates, frozen water can crack your engine block, which is a catastrophic and expensive repair. A proper coolant mixture, typically a 50/50 blend of antifreeze and distilled water, provides essential lubrication for the water pump and contains corrosion inhibitors. This mixture is engineered to withstand extreme temperatures, both hot and cold. For most climates, a 50/50 mix is ideal, but in areas with severe winters, a 60/40 antifreeze-to-water ratio might be recommended. Coolant Mixture Freezing Point Boiling Point (at 15 psi) Primary Use Case 100% Water 32°F (0°C) 212°F (100°C) Emergency use only 50/50 Mix -34°F (-37°C) 265°F (129°C) Standard for most climates 60/40 Mix -62°F (-52°C) 270°F (132°C) Extreme cold weather 70/30 Mix -84°F (-64°C) 276°F (136°C) Maximum freeze protection The bottom line is to use water only in an absolute emergency. For routine maintenance, always use the manufacturer-recommended coolant pre-mixed or mix concentrate with distilled water.
101
Share

can you register someone else's car ohio

Yes, you can register someone else's car in Ohio, but it is not a simple process and requires specific, proper documentation from the legal owner. The most critical document is a power of attorney signed by the vehicle's owner, which grants you the legal authority to act on their behalf at the Bureau of Motor Vehicles (BMV). Without this, you generally cannot complete the transaction unless you are a co-owner listed on the title. The procedure is straightforward if you have the correct paperwork. You will need the vehicle's title (the physical proof of ownership) properly signed over to you or with your name added as a co-owner. Along with the title and the power of attorney, you must present a valid form of identification, proof of Ohio auto insurance, and payment for the registration fees and taxes. The table below outlines the key documents required for this process. Required Document / Item Specific Details and Notes Vehicle Title Must be the original, signed by the legal owner(s) on the correct lines. Power of Attorney (POA) Form BMV 3776, must be notarized, authorizing you to handle the registration. Proof of Insurance Ohio-based insurance policy meeting state minimum liability requirements. Applicant's ID Your valid Ohio driver's license, state ID, or other government-issued photo ID. Odometer Reading Current mileage must be disclosed on the title or a separate form. VIN Inspection May be required if the vehicle is new to Ohio or has an out-of-state title. Payment for Fees Covers registration taxes, which are based on the vehicle's taxable value. It is crucial to understand that simply having permission to drive the car is not enough. The BMV needs to see a clear legal link between you and the owner. This process is often used for family members helping an elderly parent, or for someone purchasing a car for a relative. If the owner is out of state or incapacitated, the power of attorney becomes even more essential. Always contact your local Ohio BMV office ahead of time to confirm their specific requirements, as procedures can vary slightly by county.
116
Share

can you put power steering on an old car

Yes, you can install power steering on an old car that didn't come with it from the factory. This is a well-known and popular upgrade that significantly improves driving comfort, especially at low speeds and when parking. The process involves installing a power steering pump, a steering gearbox or rack designed for power assist, and the necessary hoses and fluid reservoir. While it's a complex job that requires mechanical skill, conversion kits are available for many classic models, making the project more straightforward. The most common approach is to install an electric power steering (EPS) system. Unlike traditional hydraulic systems that are driven by a belt from the engine, an EPS system uses an electric motor to provide assist. This is often preferred for retrofits because it's more compact, doesn't require tapping into the engine's accessory drive, and is generally easier to install. You'll need to find a kit that fits your specific car's steering column and chassis. A more traditional, but often more involved, method is a hydraulic power steering conversion . This requires sourcing a compatible steering box/rack from a donor vehicle, along with the pump, brackets, and pulleys. This method can be more challenging due to space constraints and the need to plumb high-pressure hoses. The cost and complexity vary widely. A basic electric kit might start around $600, while a full professional hydraulic installation could exceed $2,000. The table below compares some popular options. Conversion Type Estimated Cost (Parts Only) DIY Difficulty Key Advantage Electric Power Steering (EPS) Kit $600 - $1,500 Moderate Easier installation, no engine modifications Salvage Yard Hydraulic System $300 - $800 High Potentially more authentic feel New Aftermarket Hydraulic Kit $1,200 - $2,500+ High Designed for specific models, reliability Complete Professional Install $2,000 - $4,000+ N/A Guaranteed workmanship, warranty Before starting, consider your goals. If the car is a pure restoration, adding power steering might hurt its value. But if it's a driver you use regularly, the upgrade is one of the most impactful modifications for modern comfort. Assess your mechanical ability honestly; while an EPS kit is within reach for a competent DIYer, hydraulic conversions often require welding and precise fabrication. Researching forums dedicated to your car's make and model is the best way to find proven solutions and avoid common pitfalls.
107
Share

can you register a race car for the road

Yes, you can register a race car for the road, but the process is complex, expensive, and often not practical. The vehicle must be extensively modified to meet all Federal Motor Vehicle Safety Standards (FMVSS) and your state's specific regulations for emissions, lighting, and safety equipment. This typically involves adding features like headlights, turn signals, a horn, mirrors, and a street-legal exhaust system, which a purpose-built race car lacks. The primary challenge is homologation —the official certification that a vehicle meets all legal requirements for public roads. Most dedicated race cars, such as a NASCAR vehicle or an open-wheel formula car, were never designed for this and lack a Vehicle Identification Number (VIN) from the manufacturer, which is a fundamental requirement for registration. Starting with a car that already has a VIN, like a modified production model (e.g., a track-prepped Porsche 911 or Chevrolet Corvette), significantly simplifies the process. The table below outlines key areas requiring modification and the associated challenges: Modification Area Race Car Feature Required Street-Legal Conversion Estimated Cost/Challenge Lighting No headlights/tail lights Install DOT-approved lighting systems $800 - $2,500+ Emissions Straight-pipe exhaust, no catalytic converters Install full exhaust with cats; may require engine retuning $1,500 - $4,000+ Safety Racing harness, roll cage, no airbags Add OEM-style seats with 3-point belts; may need to modify cage for airbag sensor compatibility Highly Variable Noise Extremely loud exhaust Install mufflers to meet local dB limits $500 - $1,500 VIN/Title May have a "For Race Only" title or no title State-level inspection to obtain a "Reconstructed" or "Specially Constructed" title Complex paperwork, time-consuming Ultimately, while it's a fascinating project for a dedicated enthusiast with a large budget, it's often more cost-effective and reliable to purchase a high-performance sports car designed from the factory for both track and street use.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.