What time should I arrive for the Theory Test (Subject 1)?

How to Break in a New Car with Tiptronic Transmission?

Here are the methods for breaking in a new car with tiptronic transmission: 1. Warm up the car before starting: After the car has been parked overnight, the engine oil flows back to the oil pan. When the car is started, it takes some time for the oil to fully lubricate all the engine components from the oil pan. If you drive immediately after starting, the internal parts of the engine may not be sufficiently lubricated, leading to abnormal wear. Therefore, it's advisable to warm up the car briefly before driving, waiting until the idle speed stabilizes. 2. Speed control during the break-in period: The speed during the break-in period should be increased gradually. For the first 500 kilometers, try to maintain a speed between 60-70 km/h, with the engine RPM not exceeding 2,200. From 500 to 1,000 kilometers, the speed can be increased to 90-100 km/h, with the RPM generally kept below 2,500. After 1,000 kilometers, the speed can be raised to below 120 km/h, with the RPM not exceeding 3,000. 3. Gear control: During the break-in period, it's important to manage the gears properly with a tiptronic transmission. Avoid suddenly shifting into P or R while driving, as this can cause severe impact to the transmission, potentially damaging it. When shifting into reverse, ensure the car is completely stopped. Additionally, practice using the manual mode on well-paved roads to break it in. 4. Avoid coasting in N gear: While driving, avoid coasting in neutral (N gear). When in N gear, the transmission's power pump stops working, leading to abnormal wear due to lack of coolant and lubrication, which shortens the transmission's lifespan and increases fuel consumption. 5. Avoid emergency braking: Try to avoid emergency braking during the break-in period. Emergency braking can impact the car's braking system. Since the car's components are not fully broken in, frequent emergency braking is detrimental to the break-in process and can also damage the car's chassis. 6. Generally, do not change the oil prematurely: The oil used during the break-in period is typically a specialized lubricant with low viscosity, excellent heat dissipation, cleaning, and antioxidant properties. Some oils even contain grinding agents that aid in the break-in process. Changing the oil too early can hinder the break-in.

10

2

Share

Must a vehicle return to its registered location for a color change in another region?

The newly revised "Motor Vehicle Registration Regulations" by the Ministry of Public Security, effective from May 1, 2022, stipulate that vehicles undergoing color changes in another region do not need to return to their registered location. The color change registration can be processed at the local vehicle management office in the region where the vehicle is located. For small and micro passenger vehicles applying for registration changes due to color modifications, if the vehicle is not in its registered location, the application can be submitted to the local vehicle management office. The local vehicle management office should inspect the vehicle according to regulations, review the submitted proofs and documents, and electronically transfer the vehicle inspection data to the registered vehicle management office. The registered vehicle management office will then review and issue the vehicle license accordingly. Documents required for applying for a vehicle color change include: "Motor Vehicle Change Registration Application Form," original and photocopied identity proofs of the vehicle owner and agent, original vehicle registration certificate (green book), original vehicle license, and payment of all fines before the color change. These are the necessary procedures for applying for a vehicle color change. According to Article 6, Chapter 2 of the "Road Traffic Safety Law," if the color change area of a motor vehicle does not exceed 30%, no change registration is required. Conversely, if it exceeds 30%, it must be filed, and the registration must be completed within 10 days after the color change. Precautions for vehicle wrap color changes: Before changing the color of a vehicle wrap, it is necessary to consult the local vehicle management office where the vehicle is registered to confirm whether the region permits color changes via wraps. If the region does not support this method, the registration cannot be processed after the color change, and the wrap must be entirely removed to restore the vehicle's original color. Additionally, according to the "Motor Vehicle Registration Regulations," vehicle owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for change registration with the vehicle management office. Article 10 states that registered motor vehicles must apply for change registration with the registered vehicle management office under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change of usage nature, such as converting a commercial vehicle to non-commercial or vice versa. Change of the vehicle owner's residence into or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the "Road Traffic Safety Law of the People's Republic of China": Police cars, fire trucks, ambulances, and engineering rescue vehicles must be painted with designated patterns and equipped with alarms and signal lights as required. Other motor vehicles are prohibited from using similar patterns, alarms, or signal lights. Article 56 of the "Motor Vehicle Registration Regulations" states that failure to register a color change as required may result in a warning or fine from the traffic management department of the public security authority. The vehicle may also be impounded and required to revert to its original color.

12

4

Share

What to Do After a Car Scrape?

Here are the steps to take after a vehicle scrape: 1. The driver should stop the vehicle immediately, prioritize protecting the first scene, and take photos promptly. 2. Check if there are any injuries or casualties on both sides. 3. Notify the insurance company and call the police promptly, letting the traffic police handle the situation. Here is additional information on the post-collision process: 1. Stay calm, check if you are injured, and determine whether to call emergency services. 2. Get out of the car to assess the extent of vehicle damage and take photos for evidence. 3. If the damage is minor, negotiate with the other driver for a resolution. 4. You can call the police if necessary.

9

0

Share

Where is the USB port in the BMW 116i?

Inside the center armrest. Differences in the BMW 1 Series: Although the BMW 1 Series is small, it offers big fun. The outstanding handling performance of BMW is well inherited by the 1 Series, thanks to the perfect tuning of BMW's chassis and suspension system. Unlike many compact cars, the 1 Series adopts a rare front-engine, rear-wheel-drive layout in its class, which is a BMW tradition. Engine Position: To achieve the perfect weight distribution ratio for the BMW 1 Series and considering the inline-six-cylinder engine, engineers designed a relatively long front section. The center of mass of the BMW 1 Series' engine is located slightly behind the front axle.

4

5

Share

What Causes Steering Wheel Vibration at 120 km/h?

Here are the specific reasons for steering wheel vibration when braking at 120 km/h: 1. Wheel Balancing Issue: A car wheel consists of a tire and rim. When there's a wheel balancing problem, it means the wheel isn't in a balanced state during high-speed driving. If the balancing data is incorrect, the wheel's rotation center will shift, causing vibration that transmits to the steering wheel. 2. Rim Problem: If the rim has previously suffered impact damage leading to deformation, this can also cause wheel vibration during driving, resulting in steering wheel shake. 3. Chassis Component Issue: This typically occurs in poorly repaired post-accident vehicles. Impact damage to chassis components during collisions can also cause steering wheel vibration.

20

1

Share

What are the general materials for brake pads?

Brake pad materials are generally asbestos, semi-metallic, low-metallic, NAO formulation, ceramic, and high-carbon fiber. The following are the components of brake pads: 1. Steel plate. 2. Bonded heat insulation layer made of non-heat-conducting materials. 3. Friction block composed of friction materials and adhesives. Below is extended information on the main functions of the braking system: 1. Ensuring the vehicle can decelerate and stop as required by the driver during operation. 2. Ensuring reliable parking of the vehicle. 3. Safeguarding the safety of the vehicle and the driver. 4. Transmitting the generated braking effect to the wheel brake through the brake pump and brake lines.

11

0

Share

What time should I arrive for the Theory Test (Subject 1)?

How to Break in a New Car with Tiptronic Transmission?

Must a vehicle return to its registered location for a color change in another region?

What to Do After a Car Scrape?

Where is the USB port in the BMW 116i?

What Causes Steering Wheel Vibration at 120 km/h?

What are the general materials for brake pads?

Is the Mazda CX-5 engine originally imported?

How to Remove Cement from Car Surface?

Is it necessary to install ETC now?

What is the purpose of the dotted line on the rearview mirror?