What time is the second session of Subject 2 in the morning?

1 Answers
McDerek
07/30/25 9:15am
Subject 2 is divided into two examination sessions: morning and afternoon. The first session (morning session) is scheduled from 8:00 to 12:00. The second session of Subject 2 examination is from 13:00 to 18:00 (Note: Examination schedules may vary by region. The above times are for reference only. Please refer to the actual schedule of your local examination center. It is recommended to consult relevant personnel at the examination center or ask your instructor). Here is some additional information: Subject 2: There is no overall time limit for Subject 2, but the reverse parking must be completed within 210 seconds (starting from when the reverse gear is engaged), otherwise it will be considered a failure. The parallel parking must be completed within 90 seconds, otherwise it will be considered a failure. For the hill start, you must start moving uphill within 30 seconds after stopping.
Was this review help?
20
4
Share
More Forum Discussions

Can the Windshield Really Be Repaired?

Yes, it can be repaired. Here are the methods for windshield repair: Alcohol and Glass Cleaner: Wipe the area to be repaired clean, and after drying, remove any possible impurities in the crack. Observation Board: Attach an observation board to the inside of the windshield so that the repair process can be seen more clearly. Suction Cup: Align the center point of the suction cup base with the position to be repaired and secure the four corners. Pressurizing Device: Fix the pressurizing device to the suction cup base, ensuring the position is correct, then unscrew the upper part to apply pressure. Repair Fluid: Pour the repair fluid into the top opening of the pressurizing device, then screw the pressure rod back into the base. Pressure Rod: Wait for the repair fluid to penetrate and solidify, which takes about 10 minutes. Then unscrew the pressure rod, wait for one minute, and screw it back in to remove air from inside the crack. Repair Device: Finally, remove the repair device and scrape off any remaining repair fluid with a blade.
16
4
Share

What is the process for car replacement?

At present, the car replacement business is booming. What should you pay attention to when replacing a used car? Currently, the car replacement process mainly includes the following aspects: vehicle evaluation, new car pricing, document verification, license plate transfer, and loan replacement. According to regulations, car owners can apply for a renewal quota directly without going through a lottery by scrapping or selling their old car. The small passenger car renewal quota confirmation notice serves as the proof of renewal quota. The quota management authority verifies the applicant's information based on the transfer or cancellation registration details of the sold or scrapped small passenger car provided by the traffic management department of the public security authority. Upon approval, the small passenger car renewal quota confirmation notice is published on the designated website. However, this renewal quota is valid for only 6 months. The car buyer must complete the vehicle registration procedures within 6 months from the date of obtaining the renewal quota. Failure to complete the procedures within the deadline will be regarded as voluntarily abandoning the renewal quota. However, if you replace your old car with a new one at a 4S store, these procedures can be handled by the 4S store in a one-stop manner. The car owner only needs to bring their ID card, the original purchase invoice of the old vehicle, the vehicle registration certificate, and the driving license, and hand them over to the staff of the 4S store to complete the replacement in one step.
9
5
Share

What are the time regulations for vehicle annual inspections?

Vehicle annual inspection time regulations are as follows: 1. Non-operational passenger cars (including non-operational passenger cars, non-operational small and mini passenger vehicles. Starting from November 20, 2020, 7-9 seat non-operational mini and small buses (excluding vans) are included in the exemption range) are exempt from on-site inspection for the first 6 years, only requiring an inspection mark application every two years; Starting from November 20, 2020, for vehicles over 6 years but less than 10 years old, the inspection cycle is relaxed from once a year to once every two years, meaning private cars only need two on-site inspections within 10 years, specifically in the 6th and 8th years. For private cars over 10 years old, the original inspection cycle still applies: 10-15 years, once a year; over 15 years, once every six months. 2. Operational passenger vehicles must be inspected once a year within 5 years; over 5 years, once every six months; 3. Trucks and large, medium-sized non-operational passenger vehicles must be inspected once a year within 10 years; over 10 years, once every six months; 4. Motorcycles must be inspected once every two years within 4 years; over 4 years, once a year.
15
0
Share

Why Do License Plates Fall Off When Driving Through Water?

License plates tend to fall off when driving through water due to three main factors: installation method, material, and water flow. The details are as follows: 1. Installation Method: Many people prefer adding frames to their license plates, which often prevents the proper installation of the bottom two screws. Typically, license plates are secured with only two screws, primarily because many car bumpers are narrow and protrude forward. The limited width of these bumpers means they often only have two mounting holes for the license plate, leaving the plate in a suspended state with no screws at the bottom. 2. Material: License plates are usually mounted on the bumper, which is commonly made of modified polypropylene. While this material provides cushioning during collisions, is lightweight, and helps reduce fuel consumption, it can deform under external force. When driving through water, the rapid flow can pull the screws out of the deformed bumper, causing the plate to fall off. 3. Water Flow: There is often a gap between the license plate and the bumper. When a vehicle drives through water, the water hitting the bumper is forced upward and into this gap, creating an outward pushing force on the plate. As the vehicle moves through the water, this force causes the plate to wobble back and forth, eventually leading to it being washed away.
8
5
Share

What are the differences between the 2019 and 2020 Nissan X-Trail models?

The 2019 and 2020 Nissan X-Trail models are merely annual facelifts with unchanged exterior designs, featuring only some adjustments in powertrain specifications. The differences are as follows: 1. The 2020 Nissan X-Trail is equipped with two naturally aspirated engines: a 2.0L producing a maximum power of 154 horsepower and a 2.5L delivering 186 horsepower, both paired with a CVT transmission. The 2.5L variant comes with a four-wheel-drive system, while the 2.0L model is front-wheel drive. 2. The 2020 X-Trail 2.0L Fashion Edition and 2.5L Intelligent Connectivity Leading Edition now include a tire pressure monitoring system. The 2.0L Intelligent Connectivity Premium Edition adds LED headlights, automatic headlights, lens projectors, and a power-adjustable front passenger seat. The 2.5L Luxury Navigation Edition gains ProPILOT Super Intelligent Drive (L2 autonomous driving assistance system), auto hold, LED headlights, automatic headlights, and lens projectors.
3
1
Share

What is the displacement of the Passat 300?

The displacement of the Passat 300 is 1.8L. Below are the relevant details about the Passat 300: 1. Body dimensions: Length, width, height, and wheelbase are 4872*1834*1484*2803mm respectively. 2. Powertrain: Equipped with a 1.8L inline 4-cylinder turbocharged engine, paired with a 6-speed automatic transmission. 3. Curb weight: 1520kg. 4. Drivetrain: Front-wheel drive. 5. Interior features: Bluetooth system, central console LCD screen, and dual-zone automatic air conditioning. 6. Luggage compartment volume: 490L.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.