What time is the highway closed at night?

1 Answers
DeJace
07/29/25 12:28pm
Highway night closure times: 1. Small private cars and trucks are allowed to pass 24 hours a day; 2. Large commercial passenger vehicles are prohibited from entering the highway from 2:00 AM to 5:00 AM (for passenger safety). Some specific provinces may regulate that hazardous chemical transport vehicles are not allowed on the highway during certain time periods. Not all vehicles are permitted on highways. According to the Road Traffic Safety Law, pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full-trailer trucks, and other motor vehicles with a design speed of less than 70 km/h are not allowed to enter highways. For vehicles prohibited from entering the highway, the violator will be fined and receive 3 penalty points per violation.
Was this review help?
8
4
Share
More Forum Discussions

What to Do After a Car Accident?

After the accident occurs, all vehicles involved should remain at the scene to preserve the accident site, and immediately report the incident to the insurance company and traffic police department. The traffic police will arrive at the scene to investigate and collect evidence, temporarily impounding the vehicles involved, the drivers' driver's licenses, and the vehicles' registration certificates. The traffic police department will determine liability based on the accident circumstances and issue a Liability Determination Certificate to all parties involved. Send the vehicle to the designated damage assessment center and notify the insurance company promptly for damage assessment; proceed with repairs at the repair shop; the owner retrieves the vehicle. Pay all relevant fees, collect claim documents, and submit them to the insurance company to process the claim.
7
4
Share

How far can the Baojun 510 go when the dashboard shows no fuel?

When the fuel gauge light on the Baojun 510 dashboard comes on, it indicates that there is still some fuel left in the tank, typically around 10 liters, allowing the vehicle to travel at least 10 more kilometers. The Baojun 510 is a compact SUV with body dimensions of 4220mm in length, 1740mm in width, and 1625mm in height, and a wheelbase of 2550mm. It features a MacPherson strut front suspension and a torsion beam rear suspension. The Baojun 510 is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum power of 77 kW, a maximum torque of 135 Nm, and reaching its peak power at 5600 rpm.
15
3
Share

What are the reasons for the Renault Koleos failing to start?

Here are the specific reasons why the Renault Koleos fails to start: 1. Partial failure of the ignition wires: Issues such as aging of the wires, incorrect cylinder wire sequence, damaged distributor, or loose spark plug caps may occur; when starting the engine, there is a noticeable sound of the starter working, indicating that the power supply is not a problem and the starter can function normally, but the fuel line might be blocked, preventing proper fuel supply. 2. Incorrect car gear position: Generally, the P or N gear is the starting position for automatic transmission cars. If the gear is in the R position or another position, not only will the car fail to start, but there will also be certain safety hazards; once an incorrect gear position is detected, adjust the gear position promptly.
7
3
Share

What Causes a Hard Clutch Pedal in a Car?

There are several reasons why a car's clutch pedal may feel hard to press. The specific causes are as follows: 1. Clutch Pressure Plate: The issue may be due to a faulty clutch pressure plate. If the car's clutch pressure plate is malfunctioning. 2. Solution: It is necessary to promptly visit a car 4S shop or repair shop to inspect or replace the clutch pressure plate, which can resolve the problem of a hard clutch pedal. Additional Information: The main culprits are usually the clutch friction disc, clutch pressure plate, or release bearing failure. These components are wear-and-tear parts, and if they are faulty or severely worn, they can cause the clutch to feel excessively heavy. In many cases, a clutch that is too hard or impossible to press is caused by issues with these components.
15
0
Share

How to Replace the Wiper Blades on a Honda Fit?

The steps to replace the wiper blades on a Honda Fit are: 1. Press the locking tab inward at the tip of the wiper arm hook and pull the wiper bracket downward; 2. Pinch the end of the wiper rubber strip with the fixed position and forcefully pull it backward to remove the strip. Shake the removed wiper rubber strip twice to loosen the two embedded metal strips; 3. Install the metal strips onto the new wiper rubber strip and reattach it to the wiper bracket. The Honda Fit is equipped with a 1.5T naturally aspirated engine, delivering a maximum horsepower of 131ps and a maximum torque of 155nm. In terms of body dimensions, the Fit measures 4109mm in length, 1694mm in width, and 1537mm in height, making it a 5-door, 5-seat hatchback.
11
5
Share

How to reset the tire pressure warning on the JAC Refine M3?

The method to reset the tire pressure warning on the JAC Refine M3 is as follows: After checking the tire pressure, turn on the ignition, press and hold the SET button to clear the tire pressure warning prompt. Then, locate the tire option in the central control screen and select tire pressure reset. During vehicle use, it is necessary to regularly check the tires to ensure the correct tire pressure. The JAC Refine M3 is a compact car under JAC Motors. In terms of body dimensions, its length, width, and height are 4715mm, 1765mm, and 1900mm respectively, with a wheelbase of 2810mm. In terms of power, the vehicle is equipped with a 1.5T L4 150 horsepower turbocharged engine, paired with a 5-speed manual transmission.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.