What time is the first session of the driving test in the morning?

Can a Car Pass the Annual Inspection with Stickers?

Car stickers covering less than 30% of the vehicle's surface can pass the annual inspection. If the stickers exceed 30% of the body area, you must apply for registration with the traffic management department within 10 days, or you may face fines if caught. Here are some relevant details about the annual inspection: 1. Purpose of the Annual Inspection: The purpose of the annual inspection is to assess the technical condition and operational capability of the vehicle, identify fault locations and causes. Only after passing the inspection can the vehicle continue to operate or undergo repairs. 2. Key Points to Note for the Annual Inspection: Do not alter the vehicle's appearance or tire size. The actual vehicle must match the photo on the driving license. Changes to the car's appearance may result in failing the inspection. As the vehicle ages, some owners may replace tires according to personal preference. However, it is important to maintain the original tire size and model specifications; otherwise, the vehicle may not pass the inspection.

6

2

Share

What are the new regulations for motor vehicle annual inspection times?

New motor vehicle annual inspection time regulations: 1. Small and micro non-operational passenger vehicles must be inspected once every 2 years within 6 years; vehicles over 6 years old must be inspected once annually; vehicles over 15 years old must be inspected twice annually. 2. Operational passenger vehicles must be inspected once annually within 5 years; vehicles over 5 years old must be inspected once every 6 months. 3. Trucks and large/medium non-operational passenger vehicles must be inspected once annually within 10 years; vehicles over 10 years old must be inspected once every 6 months. 4. Motorcycles must be inspected once every 2 years within 4 years; vehicles over 4 years old must be inspected once annually. 5. The motor vehicle annual inspection time is determined by the new vehicle registration date. For example, if the initial registration date on the vehicle license is June 2007, then the annual inspection time is every June. According to Article 40 of the newly revised "Motor Vehicle Registration Regulations", vehicle owners can apply for inspection certification at the local vehicle management office up to three months before the expiration of the current inspection period. This means vehicles due for June inspections can undergo testing during April, May or June.

2

4

Share

MISTRA Cold Start Shaking

If you notice severe shaking after starting the car, it indicates an abnormal condition in the vehicle. Here is the relevant information: 1. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the fuel injector during a cold start can be largely absorbed by the carbon deposits. This results in an overly lean air-fuel mixture during cold starts, making it difficult to start the engine. Only when the carbon deposits become saturated with gasoline does the engine start more easily. After starting, the gasoline adsorbed on the carbon deposits is then sucked into the cylinder by the engine's vacuum pressure, causing the air-fuel mixture to become too rich. The fluctuating lean and rich conditions of the combustible mixture lead to idle shaking after a cold start. 2. For vehicles with four or more cylinders, if the shaking is more severe than usual, check the engine compartment for any abnormalities. Look for signs of a cylinder not working or multiple cylinders performing poorly. Common symptoms include burnt spark plugs, excessively large spark plug gaps, or loose connections. If these issues occur, the vehicle will shake. In such cases, stop the car and carefully inspect the spark plugs for integrity. If you have the tools, remove the spark plugs for a thorough check.

10

3

Share

How to Tell if the Car You're Picking Up is New?

Introduction to determining whether the car is new when picking it up: 1. Check the manufacturing date. If the manufacturing date is close to the pickup date, it is a new car. Conversely, if the manufacturing date is far from the pickup date, it may be an old car or a problematic car. 2. Verify whether the engine model, engine number, and chassis number match the manual. Check the vehicle's certificate of conformity and other relevant documents, and inspect the car body paint for any damage. Ensure the paint color matches the manual. 3. Open the hood and check if the engine has severe oil stains and whether all parts are clean. 4. Start the car, lightly press the accelerator, and listen for any abnormal noises or unusual vibrations. Check if the dashboard tachometer is functioning normally and if the odometer displays normal data (a new car's odometer should not exceed 30 kilometers). 5. Turn on the audio system, wipers, air conditioning, and other electronic devices to ensure they operate normally. 6. Test all switches multiple times to check for any abnormal sounds. Inspect the tire pressure, ensure the tires are brand new, and look for any scratches.

2

Share

Does the Peugeot 508 Have Independent Suspension?

The Peugeot 508 features independent suspension, utilizing a combination of front MacPherson strut independent suspension and rear multi-link independent suspension, with a relatively high level of chassis flatness. More details are as follows: 1. Each wheel is individually mounted to the body or axle via a suspension system, with the axle being of the split type, the middle section of which is fixed to the frame or body. This type of suspension ensures that impacts on one wheel do not affect the other, and due to its lightweight nature, it offers strong buffering and shock absorption capabilities, providing a comfortable ride. All performance indicators are superior to those of non-independent suspension systems, though this type of suspension is more complex in structure and can complicate the drive axle and steering system. 2. The MacPherson strut suspension is currently the most widely used suspension structure in front-engine, front-wheel-drive cars and some light passenger vehicles. The telescopic shock absorber serves as the sliding column, with the inner end of the transverse swing arm connected to the body via a hinge and the outer end connected to the steering knuckle via a ball joint. The upper end of the shock absorber is connected to the body, while the lower end is connected to the steering knuckle. Most of the lateral forces acting on the wheel are borne by the transverse swing arm, with the remainder absorbed by the shock absorber piston and rod. The line connecting the center of the upper hinge of the telescopic shock absorber and the center of the ball joint at the outer end of the transverse swing arm forms the kingpin axis, making this a kingpin-less structure. Spiral springs are commonly used in independent suspension systems, necessitating the addition of guiding devices—such as rods—to handle and transmit lateral, vertical, and longitudinal forces. To reduce vehicle weight and simplify the structure, some cars employ multi-link suspension systems. The upper link is connected to the body (or frame) via a bracket, with its outer end connected to the third link. Both ends of the upper link are fitted with rubber vibration isolation bushings. The lower end of the third link is connected to the steering knuckle via a heavy-duty thrust bearing. Multi-link suspension systems offer excellent handling stability and can reduce tire wear. Unlike MacPherson suspension systems, the shock absorbers and spiral springs in this type of suspension do not rotate with the steering knuckle.

3

5

Share

What is the battery model for Audi car keys?

The battery model is CR2032. It is a lithium manganese dioxide battery, named according to the IEC standard. Among them: C- indicates a chemical battery system with lithium metal as the negative electrode and manganese dioxide as the positive electrode; R- indicates that the battery is cylindrical in shape, with F used if it is square; 20 indicates the battery diameter is 20mm; 32 represents the battery height of 3.2mm. The nominal voltage is 3.0V, the endpoint voltage is 2.0V, and the rated capacity is around 200mAh. CR2032 typically has a lifespan of 5 years. If the manufacturer's production level is low or quality control is poor, its lifespan can be significantly shortened. Domestic first-tier brand batteries can generally guarantee this lifespan. Under ideal conditions (sealed, room temperature, no moisture, etc.), the lifespan can be extended further to 8 years or even 10 years. The usage time of a car remote key battery is closely related to the frequency of use—the more frequently it is used, the shorter its lifespan. If the remote key battery runs out, the mechanical key can be used directly to open and start the vehicle. The batteries used in car remote keys are button batteries, mainly three types: CR2016, CR2025, and CR2032. For the specific model used in each vehicle, owners can refer to the battery model in the user manual for replacement. Button-type CR2016 battery: This is one of the most commonly used remote key batteries. The battery voltage is 3V, and most car key batteries are powered by 9V, so all three batteries need to be replaced each time. Examples include Honda, Toyota, Volkswagen, Mazda, etc. CR2016 specifications: battery diameter is 20mm, thickness is 1.6mm. Button-type CR2025 battery: Its usage rate is much lower than CR2016, but some car keys still use it. It is thicker than the 2016 model but has a relatively higher storage capacity. CR2025 specifications: battery diameter is 20mm, thickness is 2.5mm. This type of battery is also commonly used in audio remotes. Button battery CR2032: Its thickness is twice that of CR2016. The 3V-CR2032 lithium manganese battery belongs to the lithium-manganese dioxide structure. The positive electrode material is chemically stable manganese dioxide, the negative electrode material is metallic lithium, and the electrolyte is a lithium battery electrolyte. The main components of the electrolyte are dimethoxyethane, propylene carbonate, and lithium perchlorate. Its shape resembles a button, hence the name button lithium battery or lithium manganese button battery.

3

Share

What time is the first session of the driving test in the morning?

Can a Car Pass the Annual Inspection with Stickers?

What are the new regulations for motor vehicle annual inspection times?

MISTRA Cold Start Shaking

How to Tell if the Car You're Picking Up is New?

Does the Peugeot 508 Have Independent Suspension?

What is the battery model for Audi car keys?

What are the methods to remove static electricity from a car?

Why can't the third-generation Haval H6 connect to the network?

What materials are needed to apply for a license plate?

What are the Sino-Japanese joint venture cars?