What time does the afternoon driving test session start?

1 Answers
CharlieAnn
07/29/25 9:44pm
There is no time limit for the afternoon test, but the latest test session will end before 6:00 PM. Extended relevant information is as follows: Afternoon test: If you have scheduled an afternoon test, try to arrive at the test center around 1:00 to 2:00 PM, then follow the arrangements of the test center staff and proceed to the designated waiting room for queuing. It is recommended to arrive at the test center half an hour before the test. First come, first served: The principle followed by major test centers in the afternoon is first come, first served, so arriving early is beneficial for you. Also, when going, make sure to bring your file, ID card, and student ID to enter the test center, then queue up to enter the waiting hall.
Was this review help?
16
0
Share
More Forum Discussions

What is the ground clearance of the Highlander?

The ground clearance of the Highlander is 170mm, which is the clearance when the vehicle is fully loaded. The clearance when unloaded is higher than 122mm, making it sufficient for urban driving conditions. The minimum ground clearance of typical family sedans generally ranges from 110mm to 150mm. A higher ground clearance improves the vehicle's off-road capability, but may reduce stability when driving on highways. The Highlander's body dimensions are 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm. It is equipped with a 2.0T turbocharged engine paired with a 6-speed automatic transmission, delivering a maximum power of 162kW and a maximum torque of 350Nm.
17
0
Share

What to Do When Your Car Gets Scratched by Someone Else?

Handling methods when your car gets scratched by someone else: First, call the police to determine the responsibilities of both parties involved in the accident. Then, check the other party's driver's license and vehicle documents, which include: license plate, annual inspection, vehicle registration, and compulsory insurance. It is recommended to exchange driver's licenses and take photos before moving the vehicles to prevent hit-and-run incidents. In cases of minor property damage with clear facts, the issue can be resolved through negotiation. Car insurance claims refer to the process where the car owner files a claim with the insurance company after a traffic accident. The basic process of claim settlement includes: reporting the accident, investigation and damage assessment, receiving and reviewing claim documents, calculation and verification, approval, and final settlement.
3
0
Share

What is the function of an automotive pressure relief valve?

The function of an automotive pressure relief valve is to protect equipment and pipelines by maintaining pressure within the set range, thereby preventing accidents. There are two main types of pressure relief valve structures: spring type and lever type. The spring type relies on the force of the spring to seal the valve disc and seat, while the lever type uses the force of the lever and counterweight. Characteristics of pressure relief valves: 1. Accurate and consistent safety pressure stability—once overpressure occurs, the valve fully opens to relieve pressure promptly; 2. Adjustable closing speed to eliminate pressure fluctuations; 3. Diaphragm transmission mechanism minimizes operational lag; 4. Can be installed in any position, allowing maintenance and inspection without altering pressure settings or removing from the pipeline.
13
3
Share

What tires are suitable for the Malibu?

The Malibu is suitable for using original equipment manufacturer (OEM) tires, specifically the Maxxis A17 tires with the specification 225/60R16 and the Goodyear Assurance FUELMAX series tires with the specification 225/55R17. The Maxxis A17 features wide circumferential main grooves and lateral fine grooves to enhance drainage, improving traction on wet and snowy surfaces. Its special tread rubber design provides excellent fuel efficiency and good wear resistance. The Goodyear Assurance FUELMAX tires, derived from the Assurance product line, incorporate fuel-saving technology that, compared to traditional tire technology, saves 4% in fuel economy and increases mileage by 15%. The Chevrolet Malibu is a mid-to-high-end sedan from General Motors, with dimensions of 4855mm in length, 1854mm in width, and 1476mm in height.
20
3
Share

What Causes Brake Fluid Leakage?

Brake fluid leakage occurs due to issues with the brake fluid lines or loose screws. Methods to check for brake fluid leakage: Let the engine idle and keep the transmission shaft in the "neutral" position, then press the brake pedal and maintain constant foot pressure. If the pedal gradually sinks under constant pressure, it may indicate a leak in the hydraulic brake system. Additionally, a visual inspection can help determine if there's a brake fluid leak. First, check the fluid level in the master cylinder reservoir. Normal wear of friction linings may cause a slight drop in the reservoir's fluid level. If the reservoir level drops abnormally, it may trigger the brake warning light, indicating potential internal or external leaks in the hydraulic system. Next, inspect the connections of brake pipes and hoses for leaks. If leaks are found, check the torque of the fasteners or replace the pipes or hoses. Finally, examine the components connected to the brakes for damage and check if the protective covers of the calipers and wheel cylinders are leaking. If there is damage or leakage, reassemble or replace these components as necessary.
20
1
Share

How Many Types of Lights Does a Car Have?

A car has 15 types of lights. Automotive lights are various traffic lights installed on vehicles to ensure safe driving, divided into two categories: lighting lights and signal lights. Generally, lighting lights include: headlights, fog lights, reverse lights, license plate lights, dome lights, instrument panel lights, step lights, trunk lights, and tool lights. Signal lights include: position lights, brake lights, turn signal lights, rear fog lights, marker lights, and parking lights. The main purpose of headlights is to illuminate the road and objects in front of the vehicle to ensure driving safety. Fog lights are installed near the headlights or slightly lower. Reverse lights are mounted at the rear of the car to illuminate the road behind and inform other vehicles and pedestrians that the car is reversing or preparing to reverse. Position lights are installed at the front and rear of the car to indicate the presence and width of the vehicle. Brake lights are installed at the rear to indicate that the vehicle is slowing down or stopping. Parking lights are installed on the sides to mark the presence of a parked vehicle.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.