What temperature should the Buick Envision's air conditioning be set to for heating?

1 Answers
SanArcher
07/29/25 12:28pm
For the Buick Envision, setting the heating to 27 degrees Celsius is sufficient. Heating System Principle: The car's air conditioning heating has no relation to the compressor. The heat source for heating is not obtained by the air conditioning itself but is provided by the car's radiator. In the morning, before the car warms up, the air conditioning blows cold air. Once the car is warmed up, the air conditioning continuously delivers warm air. The heating process itself consumes almost no energy, as it utilizes the car's waste heat. Ventilation Principle: Ventilation is divided into internal circulation and external circulation. When using internal circulation, the air inside the car barely exchanges with the outside. When using external circulation, the fresh air intake located under the hood continuously brings in outside air to maintain the freshness of the air inside the car.
Was this review help?
6
5
Share
More Forum Discussions

What are the differences between red and green radiator coolant?

There is no difference between red and green radiator coolant; the colors are simply due to added dyes to distinguish them from other liquids, without any special functional differences. Some brands and manufacturers also use unique colors to make their antifreeze stand out. Below is an expanded introduction to radiator coolant colors: 1. The color of radiator coolant is due to the addition of dyes, primarily to differentiate it from other liquids, with minimal functional differences. However, red and green coolants may have different ingredient ratios and chemical properties, and some brands use specific colors to highlight their product identity. 2. Different colored coolants should not be mixed, as this may cause chemical reactions that affect performance. Radiator coolant typically needs replacement every two years, and regular checks on coolant levels are recommended. If the coolant level falls below the minimum (MIN) mark, it indicates a shortage and should be promptly refilled to between the maximum (MAX) and minimum (MIN) marks.
3
0
Share

What does a dual VVT engine mean?

Dual VVT engine is a DVVT engine, which stands for Dual Variable Valve Timing. It incorporates VVT technology on both the intake and exhaust valves, further optimizing combustion efficiency. Below is a detailed introduction to the dual VVT engine: 1. The DVVT engine operates on a principle similar to that of a VVT engine, utilizing a relatively simple hydraulic cam system to achieve its function. The difference is that a VVT engine can only adjust the intake valves, while a DVVT engine can adjust both the intake and exhaust valves simultaneously. It features excellent characteristics of high torque at low RPM and high power at high RPM, making it technologically advanced. 2. The DVVT engine is an evolution and advancement of VVT technology, addressing technical challenges that VVT engines could not overcome. DVVT, or Dual Variable Valve Timing for both intake and exhaust, represents the most advanced form of variable valve timing system technology currently available.
6
2
Share

What to Do If You Forget to Bring Your Driver's License?

If you forget to bring your driver's license and are stopped by traffic police: First, explain the reason, then quickly notify a family member or friend to bring the vehicle registration certificate. The following are the relevant procedures for handling the situation regarding whether a driver's license is provided: 1. Providing the driver's license, no violation: If the driver provides the driver's license and there are no other violations during driving, a fine of between 20 and 200 yuan will be imposed, along with a 1-point deduction, and the vehicle will be promptly returned. 2. Providing the driver's license, with violation: If the driver provides the driver's license but there are violations during driving, penalties will be imposed based on the nature of the violation and the failure to carry the driver's license, and the vehicle will be promptly returned. 3. Not providing the driver's license: If the driver fails to provide the driver's license, penalties will be imposed as for driving without a license.
12
5
Share

How to Turn Off the Taillights That Stay On After the Engine Is Off?

If the taillights stay on after the engine is off, it indicates a faulty brake switch. The replacement process for the brake switch is as follows: 1. First, remove the protective panel, which is the base plate located above the brake, clutch, and accelerator pedals. 2. After removing the protective panel, you can see the brake light switch above the brake pedal. The switch is a twist-lock type and can be pulled out by turning it counterclockwise. 3. When installing the new brake light switch, simply insert the switch into the twist-lock hole and turn it clockwise. 4. Reinstall the protective panel in the reverse order of removal. 5. After replacement, test the brake system to ensure the brake lights function properly.
20
4
Share

What to Do When the Dipstick Shows No Oil but No Warning Light Comes On?

If the dipstick shows no oil but the oil pressure warning light is not constantly on, it indicates that although the oil level is below the lower limit, the oil pump pressure is sufficient. In this case, you can drive for a short distance, but you should immediately take the car to a professional repair shop for inspection and maintenance to avoid engine damage. More details are as follows: 1. The function of engine oil is to lubricate the engine and reduce wear on engine components. When the dipstick shows no oil, it means the engine is severely lacking oil. It is necessary to promptly check the cause, carry out repairs, and add or replace the engine oil. 2. The normal oil level should be between the "F" and "L" marks. For a car that has just been serviced, the oil level should be at the "F" mark. Any level below the "L" mark is considered abnormal.
10
2
Share

Which date on the driving license should be checked for the annual inspection?

To check the annual inspection, you need to look at the duplicate of the driving license, which has a printed line stating 'Inspection valid until XXXX year XX month'. For example, if the duplicate of the driving license states 'November 2021', then the deadline for the annual inspection is November 30, 2021. Relevant details are as follows: 1. It is generally recommended to conduct the annual inspection 2-3 months in advance. If the driving license indicates 'Inspection valid until January 2018', it is advisable to schedule the inspection within November, December, or January. 2. If the inspection is overdue, it constitutes a lapse in inspection. Driving without a valid inspection may result in a fine of 200 yuan, a deduction of 3 points, and the vehicle may be impounded. The concerned party should bring the relevant documents to the traffic police department within 30 days to handle the matter and apply for a supplementary vehicle inspection procedure. However, the vehicle must be towed and is not allowed to be driven on the road.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.