What symbol represents the tire pressure monitoring button?

1 Answers
StAva
07/28/25 7:07pm
The tire pressure monitoring indicator is a partially enclosed exclamation mark on the vehicle's dashboard. Below are specific details about tire pressure monitoring: 1. The tire pressure monitoring system utilizes the ABS sensing function to compare the rotation counts of tires. When tire pressure is insufficient, the tire circumference shortens, resulting in different rotation counts compared to other tires during driving. 2. Tire pressure monitoring relies on wheel speed sensors to detect and alert based on rotational speed differences. Tire pressure can be checked using a pressure gauge. During driving, the system monitors tire inflation pressure. If the inflation pressure in any tire is significantly lower than others, the system triggers an alert. When internal tire pressure decreases, the wheel's effective radius changes, consequently altering its rotational speed. 3. To obtain accurate tire fault information, the system requires tires to maintain proper initial pressure. Initialization must be performed after each tire pressure adjustment, tire replacement, wheel replacement, or when towing vehicles/trailers in trailer mode.
Was this review help?
8
2
Share
More Forum Discussions

Does Parking with Air Conditioning On Affect New Energy Vehicles?

Parking with the air conditioning on does have an impact on new energy vehicles. In the long run, it can easily damage the engine and is also quite costly. Essentially, the air conditioning system in new energy vehicles, similar to ordinary household air conditioners in China, operates on the principle of a heat pump, regulating the interior air temperature through changes in refrigerant state and the conversion of latent and sensible heat. New energy vehicles can be categorized into the following types: 1. Pure Electric Vehicles (BEVs): These rely solely on power batteries and drive motors for propulsion. Mainstream power batteries are primarily divided into lithium iron phosphate batteries and ternary lithium batteries, with the former being earlier in development and offering better safety, while the latter has higher energy density. 2. Plug-in Hybrid Electric Vehicles (PHEVs): These are equipped with an internal combustion engine and several electric motors, with the primary power source coming from the internal combustion engine and the electric motors assisting in propulsion. They feature larger battery capacities than mild hybrid vehicles (HEVs), enabling long-distance travel in pure electric mode. 3. Range-extended Hybrid Electric Vehicles (EREVs): These are primarily driven by electric motors, with the engine serving to charge the power battery. Energy can be replenished through charging or refueling, but the sole driving source is always the electric motor, allowing the vehicle to deliver full performance in pure electric mode. 4. Fuel Cell Electric Vehicles (FCEVs): These utilize electrical energy generated from electrochemical reactions in fuel cells, where fuels like hydrogen and oxygen from the air react under the influence of a catalyst, serving as the power source for propulsion.
20
4
Share

What does the exclamation mark on the Tundra dashboard mean?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. The following is a detailed analysis of these five situations: General fault: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Possible causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that the transmission has a fault or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Brake system fault: An exclamation mark inside a circle with parentheses represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: An exclamation mark below a horizontal line with parentheses represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating that a car light has malfunctioned. Solution: Go to a 4S shop for inspection as soon as possible, or you can check it yourself. Focus on commonly used bulbs such as turn signals, fog lights, and interior lights to see where the problem lies.
10
2
Share

Can New Energy Vehicles Charge Without Turning Off the Engine?

New energy vehicles can charge without turning off the engine. When the battery is low on power, as long as the engine is running, the regulator inside the generator will make the generator produce electricity to charge the battery. Modern cars are basically equipped with a power management system. When the current sensor installed on the battery sends a signal to the control computer indicating insufficient battery power, the system will increase the generator's output voltage, sometimes even up to 15 volts, to meet the battery's charging needs. Generally, it is not a problem to fully charge a phone when the car is turned off. However, as long as the ignition is on, other electrical devices in the car will also be powered, which over time can easily lead to battery drain or even failure to start the engine, and can also cause damage to the battery. Some cars will automatically cut off all power a few minutes after the engine is turned off or the car is locked to protect the battery. For example, the BMW X1 is set up this way. Rather than risking failure to start the engine or damaging the car battery to charge a phone, it is better to prepare a power bank to keep in the car. The battery is just "idle consumption" when the engine is off, which is not worth the loss. The car battery can be charged by the rotation of the engine. Opening the engine hood, you can see several belt-connected parts, one of which is the car's generator. As the engine runs, it drives the generator via the belt, generating electric current. The current flows through the vehicle's voltage regulator transformer, and after being filtered, part of it is used for the vehicle's operation (such as lights, audio, and ignition coils), while the excess is used to charge the onboard battery.
20
2
Share

How to Turn On the Heater and Air Conditioning in a Car?

Here are the steps to turn on the heater and air conditioning: 1. After starting the ignition, wait for 5-10 minutes. 2. Adjust the circulation mode to internal circulation to help warm up quickly, then switch to external circulation as needed to facilitate air circulation inside the car. 3. Set to the heating mode (red zone). When the heater is on, the fan will operate, which may slightly increase fuel consumption. 4. Do not press the AC button, as the heater utilizes the car's own heat cycle to save energy. 5. Adjust the air conditioning to a suitable level and set the air vent direction. Warm air should blow toward the front and feet, while cold air should blow forward.
5
5
Share

Is the Navarra a Pickup Truck?

The Navarra is a pickup truck under Zhengzhou Nissan. Below are the relevant details: 1. The new Navarra complies with the China VI emission standard. 2. The new Navarra is equipped with a 2.5-liter naturally aspirated engine, which delivers a maximum power of 142 kW and a maximum torque of 245 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed manual transmission. 3. This pickup truck is available in both two-wheel-drive and four-wheel-drive versions. 4. The front suspension of this vehicle uses a double-wishbone independent suspension, while the rear suspension employs a leaf spring suspension. 5. This vehicle features a body-on-frame design.
14
0
Share

The Role of Ignition Advance Angle

The role of the ignition advance angle is to ensure that the maximum gas expansion phase occurs during the piston's power stroke under various operating conditions. Here are the factors influencing the optimal ignition angle: 1. Cylinder temperature and pressure. Higher temperatures and pressures result in faster combustion, requiring a smaller ignition advance angle. Factors affecting cylinder temperature and pressure include: engine compression ratio, ambient temperature, cylinder temperature, and load. 2. Gasoline octane rating. Higher octane ratings indicate stronger anti-knock properties, allowing for a larger ignition advance angle. 3. Air-fuel mixture ratio. Both overly rich and lean mixtures burn slower, necessitating an increased ignition advance angle. This primarily depends on throttle opening and altitude.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.