What switches and buttons are inside the car?

1 Answers
DiValeria
07/28/25 3:09pm
Vehicles require different lights to be turned on in various situations, mainly including low/high beams, fog lights, position lights, hazard warning flashers, and turn signals. Summer and winter temperatures can be extreme, so the air conditioning system helps improve comfort for both drivers and passengers. During normal driving, doors must be closed and locked; otherwise, they may open when turning or making U-turns. Window control buttons are typically located on each door, with the master control button positioned on the driver's left-side door.
Was this review help?
13
2
Share
More Forum Discussions

Where is the tire pressure monitoring system located in the 10th-generation Civic?

The tire pressure monitoring system in the 10th-generation Civic is displayed on the dashboard near the driver's position. While driving, if one or more tires are significantly underinflated, the tire pressure monitoring system indicator will light up, and a message will appear on the driver information interface. Relevant information: 1. As a fashionable vehicle aimed at young people, the 10th-generation Civic's design fully embraces contemporary trendy and dynamic elements with a stylish and vibrant color scheme. Its sleek and streamlined body gives it the appearance of a sports car. 2. In terms of dimensions, the 10th-generation Civic measures 4649mm in length, 1800mm in width, and 1416mm in height.
17
0
Share

What does the arrow direction on the cabin air filter indicate?

The arrow direction on the cabin air filter indicates air-flow, which refers to the direction of air movement. Most cabin air filters available on the market today have arrow indicators on the side. The most common indicators are "airflow" with an arrow, while another type uses "UP" with an arrow. Additional information: 1. Most cabin air filters available on the market today have arrow indicators on the side. The most common indicators are "airflow" with an arrow, while another type uses "UP" with an arrow. These two indicators convey different meanings. The "airflow" and arrow indicate the direction of air movement, whereas "UP" and the arrow indicate that the installation direction should be upward. In fact, the installation directions for these two types of cabin air filters are opposite. 2. First, the "airflow" arrow should point downward. Reason: When removing the old cabin air filter, you will notice that the top side of the filter is very dirty and may even have debris, indicating that the air flows from top to bottom. This is indeed the case, so the "airflow" arrow should point downward. Second, the "UP" arrow should point upward because "UP" means upward.
2
4
Share

What does a balance shaft noise sound like?

Balance shaft noise mainly manifests in the following sounds: 1. Engine noise: There are many possibilities for abnormal noises coming from the engine compartment. Most people can identify engine compartment noises by the source of the sound, which is usually a metallic screeching or a whistling noise. 2. Transmission noise: Abnormal noises inside the transmission while driving, which disappear when the clutch or accelerator pedal is pressed. 3. Wear-related noise: Some minor noises from certain parts of the car body when pressing the accelerator or brake pedal. The noise is not loud and does not affect normal driving.
15
2
Share

How to Remove Adhesive Marks from Car Paint?

Here are methods to remove adhesive marks from car paint: 1. First, use a hot towel or a hair dryer to heat the adhesive. After a while, try to peel it off. If it doesn't come off easily, heat it a bit longer. If you can't peel it off by hand, use a soft paper cutter blade to avoid damaging the car glass. Before peeling, it's best to rub the area vigorously with a wet towel—sometimes the adhesive can be wiped off directly. Be careful during removal, as improper methods can easily damage the car paint. 2. You can try using essential balm (like Tiger Balm) to remove the adhesive. Soak a cloth with the balm, wet the adhesive, and then wipe it clean in a clockwise circular motion. 3. For stubborn adhesives like internship stickers, it's best to slowly peel them off with your fingernails, being careful not to tear them. Peel them off bit by bit. Then, use tar remover or similar products to clean off any residue. 4. For larger or extremely stubborn adhesive areas, use a car-specific adhesive remover. If you're unsure, you can visit a 4S store for professional car detailing and let technicians handle the removal. When using a car adhesive remover, first clean the area with a dry cloth, then spray an even amount of the remover, and wipe it off with a wet cloth.
11
2
Share

How Many Years Can Tires Be Stored Without Use?

Tires have a storage lifespan, which should not exceed 3 years according to relevant regulations. Generally, tires should not be stored for more than 3 years from the date of production, and their maximum service life on vehicles should not exceed 8 years. Additional Information: 1. Tires are one of the key components of a vehicle, directly in contact with the road surface. Together with the vehicle's suspension system, they help absorb shocks during driving, ensuring a comfortable ride and smooth driving experience. They also maintain good traction between the wheels and the road, improving the vehicle's traction, braking, and off-road capabilities. Tires bear the weight of the vehicle, and their critical role in automotive performance is increasingly recognized. Tires hold a vital position among vehicle components, significantly impacting driving performance, and their lifespan directly affects transportation economic efficiency. 2. Car tires also have an 'age.' Even a brand-new tire will age if stored for more than four years, as the primary material of tires is rubber, which naturally deteriorates over time with use or storage. Using aged tires can mildly affect vehicle performance or, in severe cases, lead to blowouts, endangering lives.
9
0
Share

How to use the ASR in the car?

ASR function is enabled by default. The main functions of ASR are introduced as follows: 1. Prevent the driving wheels from slipping during vehicle starting and acceleration; prevent the driving wheels from spinning on asymmetric road surfaces or when turning; 2. Improve traction and maintain driving stability; and control the slip rate within the range of 10%—20%. 3. Extension: If the ASR light is on, it indicates that there may be a fault in the vehicle's traction control system. The owner should send the vehicle to a 4S shop for inspection as soon as possible. Such faults are usually caused by circuit failures, and a fault diagnostic tool is needed to find the cause of the fault. Finally, after repair, the fault light can be eliminated.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.