What SUVs does GAC Honda have?

What are the symptoms of a clutch master cylinder failure?

The symptoms of a clutch master cylinder failure include: 1. Oil leakage and clutch not disengaging. This affects the normal operation of the vehicle, increases fuel consumption, and poses safety hazards. Quick diagnosis method: Step on the clutch pedal in the car and observe whether the slave cylinder rod moves. If it doesn't move, disconnect the oil pipe connected to the slave cylinder and check if oil comes out. If no oil comes out, it's a problem with the master cylinder; if oil comes out, it's a problem with the slave cylinder. 2. When the driver presses the clutch pedal, the push rod moves the master cylinder piston to increase oil pressure, which travels through the hose into the slave cylinder, forcing the slave cylinder rod to push the release fork and move the release bearing forward. When the driver releases the clutch pedal, the hydraulic pressure is released, and the release fork gradually returns to its original position under the action of the return spring, putting the clutch back into the engaged state. 3. When the driver steps on the clutch, it may not disengage or feel particularly heavy, especially when shifting gears. You may notice difficulty in shifting, incomplete disengagement, and occasional oil leakage from the slave cylinder.

15

3

Share

Why does the car's exhaust pipe turn red?

Car exhaust pipes turning red occur because some of the fuel mixture from the cylinders continues to burn inside the exhaust pipe. If the air-fuel mixture is too lean, the combustion speed of the flammable gas slows down, extending into the exhaust stroke and causing the exhaust pipe to turn red. Below are the specific reasons: 1. Burning gases rushing into the exhaust pipe raise the exhaust temperature. This can happen due to poor sealing of the exhaust valve or excessively small valve clearance, allowing burning gases to enter the exhaust pipe and increase its temperature. Delayed fuel injection not only slows combustion but also leads to incomplete combustion, causing diesel to burn in the exhaust pipe during later stages of injection, further raising the exhaust temperature. 2. During maintenance, adjust the air-fuel mixture concentration, inspect and adjust valve clearance, and fine-tune ignition or injection timing. Remove the exhaust pipe and muffler, disassemble the muffler, and clean carbon deposits by soaking in kerosene (or using chemical methods), scraping with a blade, or burning the muffler core over an open flame to dry it out. Finally, clean with a wire brush. Replace any worn or damaged components as necessary for repair.

14

4

Share

How Long Does a New Car Qualify as Inventory Vehicle?

There is no legal definition for the term 'inventory vehicle'; it is an industry-specific term in the automotive sales sector. Generally, domestically produced joint-venture or self-owned brand cars that have been in stock for more than three months to half a year are considered inventory vehicles. For imported cars, due to the time-consuming processes of transportation, customs clearance, and import procedures, the threshold is more lenient, typically extending to six months or a year. Below are solutions if you purchase an inventory vehicle: 1. The production date of the vehicle can usually be found on the car's nameplate, located on the side of the passenger seat or in the engine compartment. The time elapsed since the production date indicates the duration it has been in inventory. 2. There are no specific regulations regarding whether consumers who purchase inventory vehicles are entitled to extended warranties or special after-sales services. However, if a 4S dealership intentionally conceals the fact or if the car is sold as a new vehicle within one year but turns out to be older than a year or even more, this constitutes fraudulent behavior. In such cases, the consumer is entitled to demand compensation equal to three times the price of the product or service.

20

3

Share

Is the license plate mailed with cash on delivery?

The DMV mails license plates with cash on delivery, meaning you have to pay the shipping fee yourself. It usually takes 3-4 days for the license plate to arrive. EMS (Express Mail Service) is the designated courier for mailing license plates by the DMV, and the delivery speed is slightly slower. Generally, from the time the license plate is mailed out to the time the owner receives it, it will not take more than a week at the latest. Below are the details: 11183 phone inquiry: 11183 is the phone number for China Post EMS. After dialing, transfer to a customer service representative, provide the license plate number, and you can inquire about the logistics progress of the license plate. It usually takes 3-4 days for the license plate to arrive. The license plate mailing service is provided by EMS, and the delivery speed is slightly slower. Generally, from the time the license plate is mailed out to the time the owner receives it, it will not take more than a week at the latest. Traffic Management 12123 app inquiry: Register and log in to the app. For Apple phones with iOS 15 or above, use the Traffic Management 12123 app (V2.8.1B437). You can check the progress of your license plate under the "Online Progress" section. Once the license plate is made and mailed out, you can also track the logistics. If you have bound your mobile phone number, you will receive an SMS notification when it is mailed out. Postal APP inquiry: For Apple phones with iOS 15 or above, download the Postal APP (V3.5.5). This is the official app of China Post. Open the app, and at the top, there is a mail progress search bar. Click to enter the inquiry page. On the page, select "Motor Vehicle License Plate," enter the license plate number or application number, and you can inquire. The Traffic Management 12123 app is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for vehicle owners and drivers, including personal user registration, appointment, acceptance, and processing of vehicle and driver's license-related services, traffic safety information inquiries, service reminders, service guidance, and road traffic services. The DMV, short for Vehicle Management Office, is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and deregistration. The DMV also processes applications for driver's licenses, replacements, renewals, and inspections, as well as other vehicle and driver-related services. Issues such as improperly filled forms or failure to sign and stamp as required should be reported to the supervisory department.

17

3

Share

What does ETC on the highway refer to?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC charging method: Through the dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane of the toll station, the bank's back-end settlement processing is carried out using software networking technology, thereby achieving the purpose of vehicles passing through the toll station without stopping to pay the toll. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license must include the page with the most recent annual inspection seal; Postal credit card application form, which will be used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS receipt to the designated postal outlet to receive and install the ETC onboard device for free, with no charges during the process; Be between 18 and 60 years old; Own a vehicle under personal name. Below are precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a steeply inclined windshield, which reduces the driver's field of vision. If ETC installation does not consider this, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a solar panel on the back that can charge itself. Therefore, avoid installing it on the blackened areas of the windshield or positions that may block the solar panel. Once installed, do not remove it casually: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed casually, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll payment for the front vehicle; The ETC lane recognition speed is 20 kilometers per hour. Excessive speed may prevent the vehicle device information from being read, resulting in failed toll deduction; When using a debit card bound to ETC, insufficient balance will also cause toll deduction failure.

18

2

Share

What does the CANCEL button in the car mean?

It is the cruise control deactivation switch. The introduction of cruise control function buttons is as follows: 1. ON/OFF button – Cruise control switch: (1) When pressing the ON/OFF button, the CRUISE/MAIN indicator light above the coolant temperature gauge illuminates. The cruise control system activates, ready to receive speed setting operations. (2) Pressing the ON/OFF button again turns off the CRUISE/MAIN indicator light. The cruise control system deactivates. 2. SET/COAST button – Speed setting/deceleration control switch (operational above 30 km/h): (1) While driving, pressing the SET/COAST button sets the current speed, and the CRUISE indicator light above the coolant temperature gauge illuminates. Release the accelerator to maintain the set speed. (2) During cruise control, pressing the SET/COAST button again decreases speed by 1.6 km/h per press. (3) Holding the SET/COAST button during cruise control gradually reduces speed. 3. RES/ACCEL button – Acceleration setting/acceleration control switch (operational above 30 km/h): (1) During cruise control, pressing the RES/ACCEL button increases speed by 1.6 km/h per press. (2) Holding the RES/ACCEL button during cruise control continuously increases speed. (3) During cruise control, pressing the CANCEL button temporarily deactivates cruise control. Pressing the RES/ACCEL button again causes rapid acceleration to the previously set cruise speed. 4. CANCEL button – Cruise control deactivation switch: Pressing the CANCEL button during cruise control temporarily deactivates the system, turning off the CRUISE indicator light above the coolant temperature gauge.

12

4

Share

What SUVs does GAC Honda have?

What are the symptoms of a clutch master cylinder failure?

Why does the car's exhaust pipe turn red?

How Long Does a New Car Qualify as Inventory Vehicle?

Is the license plate mailed with cash on delivery?

What does ETC on the highway refer to?

What does the CANCEL button in the car mean?

How many kilometers can original tires run?

How to Access the Rear Seats in a Mini 3-Door

What does an exclamation mark in the vehicle mean?

Why is the clutch always unstable?