What SUV models does Dongfeng Nissan have?

What are the differences between Nissan X-Trail and Nissan Qashqai?

Nissan X-Trail and Nissan Qashqai differ in the following aspects: 1. Different tire specifications: The tire specification for Nissan X-Trail is 225/65r17, while for Nissan Qashqai it is 215/60r17. 2. Different body dimensions: The Nissan X-Trail measures 4675mm in length, 1820mm in width, and 1722mm in height; the Nissan Qashqai measures 4401mm in length, 1837mm in width, and 1593mm in height. Both the Nissan X-Trail and Nissan Qashqai are equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151ps, a maximum power of 111kw, and a maximum torque of 194nm, paired with a 7-speed continuously variable transmission.

20

2

Share

What Causes Car Shaking When Releasing the Accelerator?

Shaking when releasing the accelerator may be caused by mismatched engine and transmission, clutch issues, or loose ball joints in the steering linkage creating gaps. The car engine's throttle, usually controlled by the accelerator pedal (also called the gas pedal), is the device that regulates fuel supply in vehicle engines. Here are the specific reasons for car shaking when releasing the accelerator: 1. High gear with low engine RPM causing insufficient power. 2. Dirty throttle body leading to poor air intake. 3. Clogged fuel lines resulting in insufficient fuel supply and power loss. 4. Severe carbon buildup causing incorrect air-fuel mixture concentration.

14

3

Share

Is a Paint Booth Necessary for Automotive Painting?

Automotive painting must be performed in a paint booth. Below is an introduction to automotive paint booths: An automotive paint booth is a complete set of large-scale equipment. Prior to using a paint booth, vehicles typically undergo pre-treatment. This not only eliminates the drawbacks of manual processing, improves work efficiency, but also enhances the quality of paintwork during vehicle repair operations. This is because the paint booth can uniformly heat and rapidly dry the paint surface according to operator settings, while also isolating external contaminants such as dust that could affect the paint. Consequently, this eliminates the need for subsequent polishing and other paint surface treatments.

20

1

Share

What does 4PR tire mean?

4PR tire refers to a tire with 4 layers of fiber, meaning the more layers it has, the stronger its load-bearing capacity and the thicker the tire. Generally, 4PR tires are used for front wheels, while 6PR tires are used for rear wheels. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. Below are the functions of car tires: 1. Support the entire weight of the vehicle: Bear the vehicle's load and transmit forces and moments in other directions. 2. Transmit traction and braking torque: Ensure good adhesion between the wheels and the road surface to enhance the vehicle's power, braking, and off-road performance; work with the vehicle suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Prevent damage to vehicle components: Protect vehicle parts from severe vibrations and premature wear, adapt to high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency.

16

5

Share

Under what circumstances can tires be covered by the three-guarantee policy?

Tire quality three-guarantee coverage can be divided into tread, shoulder, and sidewall. The following are specific introductions to situations where tires can be covered by the three-guarantee policy: 1. Tread: During production, if the tread is too long, not compacted, the tread brushing is uneven, poor adhesion with the carcass leading to pressure loss, or if there is a rollover, as well as cases where the crown steel belt layer is exposed. 2. Shoulder: Separation between the shoulder rubber and rubber, or between rubber and cord layers, but without obvious bulging, with a smooth surface at the separation point and no tearing, or cases where rubber and cord layers form obvious bulges resulting in shoulder bubbles. 3. Sidewall: Separation between the sidewall rubber and cord layers forming side voids or side bubbles, with a smooth surface at the separation point.

9

3

Share

What to Do When the Car Makes Buzzing Noises with AC On?

When the car makes a buzzing sound as soon as the AC is turned on, it may be due to the following reasons: 1. The air filter is dirty, causing excessive noise. 2. There are debris in the blower fan blades, leading to abnormal sounds. You can test this by turning on the blower without starting the engine to see if the noise appears. If it does, the issue is likely with the blower. 3. Deformed fan blades or a damaged fan motor in the car's AC system. 4. Worn clutch bearings inside the AC compressor may cause increased engine noise when the AC is on. This component cannot be replaced separately and requires replacing the entire AC compressor assembly. 5. Loose screws in the blower due to vibration. 6. The fan blades hitting other components. 7. Foreign objects in the air ducts. 8. Worn or damaged blower motor.

19

5

Share

What SUV models does Dongfeng Nissan have?

What are the differences between Nissan X-Trail and Nissan Qashqai?

What Causes Car Shaking When Releasing the Accelerator?

Is a Paint Booth Necessary for Automotive Painting?

What does 4PR tire mean?

Under what circumstances can tires be covered by the three-guarantee policy?

What to Do When the Car Makes Buzzing Noises with AC On?

How to Adjust the Height of Vehicle Lights?

What brand is the car with two semicircles on top and bottom?

What Are the Causes of Excessive Wind Noise in Cars?

What are the differences between China 6 and China 5?