What suspension is equipped on the Tiggo e?

What does ecoheatcool mean?

ecoheat is the eco-friendly heating mode; ecocool is the eco-friendly cooling mode. In both the eco-friendly heating and cooling modes, the engine prioritizes fuel efficiency. Meaning of ECO: ECO stands for the initials of three English words: Ecology, Conservation, and Optimization. It is a vehicle energy-saving mode that, when activated, helps to conserve energy. Principle of ECO: ECO primarily involves comprehensive judgment and analysis of factors affecting fuel consumption during vehicle movement, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel amount to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. Simply put, it controls the engine speed with appropriate gears to minimize unnecessary fuel consumption.

12

1

Share

When should the timing chain of EA888 be replaced?

For models equipped with EA888 engines before July 2012, the timing chain must be replaced after 60,000 kilometers. The relevant explanations are as follows: 1. Reason: After 60,000 kilometers, the engine's tensioner may become loose, leading to the risk of timing chain misalignment or even cylinder and valve damage. If there are symptoms such as oil loss, difficulty in starting, or sudden engine shutdown while driving, immediate replacement is necessary. 2. Precautions: During replacement, the tensioner 06H should be replaced with 06K, the timing chain should be replaced with a threaded type, and all four guides should be replaced. It is recommended to replace the entire set, including the tensioner, timing chain, balance shaft chain, plastic guides, and the lower side cover.

2

3

Share

What does 'car coal mining' mean?

Car coal mining refers to cleaning carbon deposits. 'Coal mining' is actually a shorthand term for disassembling and cleaning the engine's intake system. During vehicle operation, as long as the engine is running, carbon deposits will form. When these deposits accumulate excessively, they can affect the engine's normal operation. Therefore, it is necessary to clean these carbon deposits regularly based on the vehicle's usage. Below are some methods for cleaning carbon deposits: In various 'auto parts markets' and 4S shops, due to technical reasons or other factors, the common method used for cleaning carbon deposits is 'intravenous injection.' However, this only addresses the symptoms, not the root cause, and is particularly ineffective for slightly older vehicles. Simply put, the reason is that these carbon deposits are too 'stubborn.'

14

3

Share

Do tires need to be replaced after 8 years?

Tires generally need to be replaced after 8 years because the rubber deteriorates with age. The typical service life of tires is around 3 years or 80,000 kilometers. Here are the relevant details: 1. Introduction: The replacement time for tires depends on various factors such as tire brand, quality, driving conditions, and driving style, usually ranging between 50,000 to 80,000 kilometers. 2. Replacement conditions: Reaching the wear limit: Tires must be discontinued when they reach the wear limit indicator (i.e., when the tread depth is below 1.6 mm). Tire aging: Numerous small cracks appear at the base of the tread grooves or on the sidewalls. Tires with deformed treads or damaged bead areas: Tires that have been damaged by running under-inflated, leading to sidewall compression damage, or those corroded by chemicals should not be used further.

6

4

Share

What is the ESP switch?

ESP switch has the word 'off' on it, and the related explanations are as follows: 1. Introduction: ESP can maintain the best stability of the vehicle under various conditions, and the effect is more obvious in the case of oversteering or understeering. ESP is the electronic stability program of the vehicle body, which is a general term for systems or programs aimed at improving the handling performance of the vehicle and effectively preventing the vehicle from losing control when it reaches its dynamic limit. The electronic stability program can improve the safety and handling of the vehicle. 2. Supplementary explanation: EBD is to adjust the braking force distribution to prevent the rear wheels of the vehicle from locking first. It generally fails only when the module hardware fails; ABS is to prevent the wheels from locking. By calculating the vehicle slip rate, it is controlled near the peak adhesion coefficient, which belongs to passive safety control.

5

Share

What Causes the Dragging Sensation When Releasing the Throttle in a Car?

Releasing the throttle and experiencing a dragging sensation in the engine could be related to cleaning the fuel system. Improper operation or incorrect installation may lead to this issue, so it is recommended to have it checked promptly. Below is relevant knowledge about the dragging sensation: When releasing the throttle, the upshift mechanism may be triggered, causing the engine's RPM to drop naturally during upshifting. This RPM drop leads to a reduction in the engine's torque output, resulting in the engine's kinetic energy output being lower than the car's demand, hence the sensation of being dragged. This issue typically occurs between 1st to 2nd gear or 2nd to 3rd gear shifts, as the gear ratio differences between these gears are relatively large.

20

0

Share

What suspension is equipped on the Tiggo e?

What does ecoheatcool mean?

When should the timing chain of EA888 be replaced?

What does 'car coal mining' mean?

Do tires need to be replaced after 8 years?

What is the ESP switch?

What Causes the Dragging Sensation When Releasing the Throttle in a Car?

How often should the EA888 spark plugs be replaced?

Is Mobil Super 2000 5W30 Fully Synthetic?

What Impact Does Torque Have on a Car?

How to Use Honda Wipers?