What suspension does the Yuexiang V3 use?

1 Answers
LaValentina
07/29/25 6:00pm
The Yuexiang V3 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. Details are as follows: 1. The multi-link independent suspension is a very common type of independent suspension, which is actually an improvement based on the double-wishbone independent suspension. This suspension replaces the two wishbones of the double-wishbone suspension with separate links. The multi-link independent suspension can enhance the tire's contact with the ground, thereby improving traction and, consequently, the vehicle's handling. 2. The MacPherson suspension has a very simple structure, consisting of only an L-shaped control arm. The MacPherson suspension hardly takes up any space in the engine compartment, which is why most front-transverse-engine vehicles use a MacPherson front suspension.
Was this review help?
5
4
Share
More Forum Discussions

How to Download Apps on the Envision's Central Control?

The method to download apps on the Envision's central control is to check in the app download section of the central control display and proceed with downloading the relevant applications. The car's central control is the area that manages comfort and entertainment devices such as the car's air conditioning and audio system, including the central control door lock system. The driver can use the car's central control to operate the door switches and window lift system. The Envision is a mid-size SUV under SAIC General Motors, with dimensions of 4686mm in length, 1839mm in width, and 1686mm in height, and a wheelbase of 2750mm. The vehicle is equipped with front-row multi-functional seats, rear-row sliding seats with adjustable backrest angles, a large split central storage box, a heated steering wheel, and a two-piece oversized panoramic sunroof.
14
5
Share

How to Replace the Air Conditioning Filter in the Changan New CS75?

The air conditioning filter in the Changan New CS75 is located inside the storage compartment in front of the passenger seat. The steps to replace the air conditioning filter are as follows: 1. First, remove the storage compartment by locating the fixing clip on the right side of the glove box and pulling it outward firmly. 2. Remove the fixing clip of the glove box cover to detach it. 3. Squeeze both sides of the glove box towards the center with both hands, and the glove box can then be taken off. 4. Once the glove box is removed, you will see the air conditioning filter cover. Press the fixing clips on both sides of the cover firmly to remove it. 5. Pull out the old air conditioning filter to the outside, insert the new one, and reassemble everything in reverse order (pay attention to the installation direction of the air conditioning filter).
13
0
Share

How to Remove the Rearview Mirror of Mercedes-Benz C180?

Mercedes-Benz C180 Rearview Mirror Removal Method: Pinch the cylinder behind the rearview mirror and rotate it counterclockwise by 45 degrees to remove it. After removal, the base of the interior rearview mirror will still adhere to the front windshield. The car rearview mirror is an important safety component, and its mirror surface and shape are carefully designed. Therefore, the quality and installation of rearview mirrors are subject to corresponding industry standards and cannot be altered arbitrarily. The Mercedes-Benz C180 is a C-class model with a length, width, and height of 4783mm, 1810mm, and 1442mm respectively, and a wheelbase of 2920mm. The vehicle's exterior features include an electric sunroof, panoramic sunroof, sport version surround, aluminum alloy wheels, electric sliding side doors, electric suction doors, roof rack, remote start, and electric trunk.
14
4
Share

Is the BYD F0 equipped with a three-cylinder engine?

BYD F0 is equipped with a three-cylinder engine. This car is powered by a 1.0-liter three-cylinder naturally aspirated engine. Here are the relevant details: 1. The 1.0-liter naturally aspirated engine of the BYD F0 has 68 horsepower and a maximum torque of 90 Nm. The engine's maximum power is achieved at 6000 rpm, and the maximum torque is available between 4000 to 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. 2. The AMT transmission is the earliest type of automatic transmission, known for its low cost. Its structure is almost identical to a manual transmission, except for the addition of a control mechanism. 3. The front suspension of the BYD F0 uses a MacPherson independent suspension, while the rear suspension employs a trailing arm suspension.
15
1
Share

Is Driving at 132 km/h Considered Speeding When the Speed Limit is 120 km/h?

Driving at 132 km/h is considered speeding when the speed limit is 120 km/h. Additional information: Penalties for speeding within different ranges: 1. Exceeding the speed limit by less than 10%: A warning will be issued; 2. On roads with a speed limit below 50 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 3. On roads with a speed limit between 50 km/h and 80 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 4. On roads with a speed limit between 80 km/h and 100 km/h: Exceeding the speed limit by 10% to less than 20% will result in a fine; exceeding by 20% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine; 5. On roads with a speed limit above 100 km/h: Exceeding the speed limit by 10% to less than 50% will result in a fine; exceeding by 50% to less than 70% will result in a fine; exceeding by 70% or more will result in a fine.
13
5
Share

Where is the Tiguan L's cabin air filter located?

Tiguan L's cabin air filter is located behind the glove compartment in front of the front passenger seat. You can see it by opening the glove compartment cover. The following are the functions of the cabin air filter: 1. Filter the air inside and outside the vehicle. 2. Improve the quality of incoming air to keep the air in the cabin clean. Below is extended information on the steps to replace the cabin air filter: 1. First, locate the position of the cabin air filter in your vehicle. 2. Loosen the fixing screws or clips of the cover plate and remove the cover plate where the cabin air filter is located. 3. Pull out the old cabin air filter and check its contamination level. If it is slightly dirty, you can use an air gun to blow away the dust or tap it to shake off the dust. If it is severely dirty or deformed, you need to replace it with a new one. 4. When installing the filter, make sure the side with writing faces outward. Insert the filter back in the same way, then cover and secure the cover plate.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.