What suspension does the Ferrari F12 use?

Does the Golf meet China 6 emission standards?

Golf meets China 6 emission standards. Emission standards refer to regulations on the content of harmful gases such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot emitted from vehicle exhaust. The Golf has a body size of 4296mm in length, 1788mm in width, and 1471mm in height, with a wheelbase of 2636mm, a fuel tank capacity of 51 liters, and a trunk capacity of 380 liters. The Golf is equipped with a 1.2T engine, with a maximum power of 85 kilowatts at 5000 rpm, a maximum torque of 200 Nm, and is paired with a 7-speed dual-clutch transmission.

12

4

Share

What does the steering wheel icon on the dashboard mean?

The appearance of a steering wheel icon on the dashboard indicates a power steering system malfunction. Possible causes include: 1. Generator failure leading to unstable power supply; 2. Power steering pump malfunction; 3. Loose connections in the power steering system; 4. Air in the steering system causing abnormal steering; 5. Mechanical damage to the steering gear piston cylinder, degraded sealing performance of oil seals, or damaged control valve; 6. Foreign objects in the steering hydraulic lines causing the steering pump flow control valve to stick. Solutions for the steering wheel icon on the dashboard are: 1. Check whether the generator, power steering pump, and steering gear mechanism are damaged; 2. Inspect all connection points for looseness; 3. Verify that tire pressure is at normal levels; 4. Replace the power steering pump or steering gear components.

11

2

Share

How far can the Lavida go when the fuel gauge shows 0 km?

When the Lavida's fuel gauge shows 0 km, it can still travel approximately 20 kilometers. The current fuel level of the vehicle can be viewed through the LCD screen. The Lavida is a compact 4-door, 5-seater sedan with the following body dimensions: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear.

20

3

Share

Will an automatic transmission car move without pressing the accelerator when starting?

An automatic transmission car will move without pressing the accelerator when starting. Automatic transmission vehicles do not have a clutch pedal. When the gear is shifted into the driving position, the clutch is already engaged. Without the resistance from the brakes, the car will naturally move forward slowly. An automatic transmission car refers to a vehicle where the driver does not need to manually shift gears; the car will automatically select the appropriate gear based on the driving speed and traffic conditions. The steps to start an automatic transmission car are: 1. After the driver sits in the driver's seat, press the start button directly; 2. Press the brake and press the start button to ignite and start the engine; 3. Release the foot brake and let the car warm up in place; 4. Press the brake again and shift into D gear; 5. Release the handbrake and slowly release the foot brake to start the car.

5

1

Share

How to Cancel the Maintenance Reminder in a Car?

To cancel the maintenance reminder in a car, follow these steps: 1. Turn off the vehicle key to ensure all dashboard lights are off; 2. Press and hold the maintenance light reset button; 3. Turn on the vehicle key to illuminate all dashboard lights; 4. Continue holding the button for a moment to enter reset mode; 5. Release the maintenance reset button and press button A within 20 seconds to complete the reset. The steps for car maintenance include: 1. Replace the engine oil, oil filter, cabin air filter, and air filter; 2. Check if all fluids meet the required standards; 3. Inspect the functionality of the lights, chassis, and braking system; 4. Check and tighten the wheel and hub nut connections; 5. Adjust the idle speed and idle mixture pedal clearance; 6. Check the tightness of the engine cylinder head screws.

16

5

Share

How to Identify an Imported Isuzu Engine?

Distinguishing an imported Isuzu engine involves checking the model number and paying attention to the markings. An engine is a machine capable of converting other forms of energy into mechanical energy, primarily used as a power generation device. Engines are categorized by structure and function into: 1. External combustion engines: Fuel burns outside the engine; 2. Internal combustion engines: Fuel burns inside the engine; 3. Gas turbines: Combustion produces high-pressure gas, which drives the turbine blades to rotate and output power. Key maintenance tips for engines include: 1. Using high-quality engine oil for lubrication, cleaning, cooling, sealing, and wear reduction; 2. Using qualified coolant; 3. Regularly cleaning radiator scale; 4. Periodically removing carbon deposits from the car; 5. Timely replacement of the car's three filters (air, oil, and fuel filters).

19

2

Share

What suspension does the Ferrari F12 use?

Does the Golf meet China 6 emission standards?

What does the steering wheel icon on the dashboard mean?

How far can the Lavida go when the fuel gauge shows 0 km?

Will an automatic transmission car move without pressing the accelerator when starting?

How to Cancel the Maintenance Reminder in a Car?

How to Identify an Imported Isuzu Engine?

What grade of gasoline should the Honda Elysion use?

What does the 'auto' light mean?

How to Turn on the Heater in Geely Emgrand GL?

What is the fuel consumption of the Soueast DX7?