What suspension does the BYD G5 use?

1 Answers
HoldenDella
07/30/25 9:50am
BYD G5 uses MacPherson independent suspension for the front suspension. More details about the BYD G5 are as follows: 1. In terms of appearance, the BYD G5's headlights are composed of lens-equipped light clusters, and the grille adopts a multi-slat chrome style. Additionally, a front-view camera is visible below the central logo on the grille. 2. For the rear, the BYD G5 features a two-piece combination taillight design and dual single-exit exhaust pipes. The trunk opening is also larger than that of the Surui. Moreover, the BYD G5 has a bolder design compared to the Surui, featuring a curved multi-slat grille, LED daytime running lights, and a waistline that extends from the front door to the taillights. 3. In terms of body dimensions, the BYD G5 is longer and wider than the Surui, measuring 4700/1790/1480 mm in length, width, and height respectively, with a wheelbase of 2670 mm.
Was this review help?
13
5
Share
More Forum Discussions

How to Use the Cruise Control on the Regal?

Regal cruise control usage method: 1. Press the cruise control button located on the left side of the steering wheel to activate it; 2. Briefly push the RES button upward to accelerate to the desired speed - each short push increases speed by approximately 1 km/h, while a long push increases by 5 km/h; 3. Briefly push the SET button downward on the steering wheel - the set speed will briefly appear on the instrument cluster. If cruise control is already enabled, this will decrease the speed; 4. Remove your foot from the accelerator pedal. To deactivate cruise control, gently press the brake pedal - the indicator light will turn off when cruise control is disengaged. The Regal is one of Buick's strategic models, with body dimensions of 4913mm in length, 1863mm in width, and 1462mm in height, featuring a wheelbase of 2829mm. The vehicle offers two powertrain options: the eighth-generation Ecotec 2.0T variable cylinder turbocharged engine and the 1.5T SIDI direct-injection turbocharged engine.
3
3
Share

What to Do If Paint Gets on the Car?

Methods to remove paint from a car: 1. Banana oil cleaning: Banana oil, also known as thinner, can be used to dilute paint and is effective in cleaning paint spots. However, be aware of its flammable, explosive, toxic, and volatile properties, as well as its corrosive effect on the paint surface. It can be used on car glass. 2. Gasoline cleaning: Gasoline has similar properties to banana oil and provides good cleaning results without the strong corrosive effects of banana oil. A wet towel can be used for wiping. 3. Use of tar remover or adhesive remover. 4. Carburetor cleaner: This is much more irritating than tar remover but also has some cleaning effect. 5. Car wash clay cleaning: After soaking in water for a while, it becomes soft and has strong cleaning power without being corrosive. 6. Fine sandpaper or blade removal: Fine sandpaper or blades can also remove paint spots with careful operation, but there is a risk of scratching the paint surface.
17
3
Share

What are the differences between the 2018 and 2019 Buick Verano?

The differences between the 2018 and 2019 Buick Verano: 1. Different exterior dimensions: The 2018 Verano measures 4718mm in length, 1802mm in width, and 1466mm in height; the 2019 Verano measures 4730mm in length, 1820mm in width, and 1488mm in height. 2. Different tire sizes: The 2018 Verano has tire specifications of 205/55R16; the 2019 Verano has tire specifications of 215/45R16. The Buick Verano comes standard with comprehensive active safety features such as six airbags, rear parking sensors, and tire pressure monitoring. It is also equipped with functions like ACC adaptive cruise control, FCA forward collision alert plus CMB collision mitigation system, LKA lane keeping system, SBZA side blind zone alert, and APA automatic parking assist.
7
3
Share

What is the wading depth of the Tiguan L?

The maximum wading depth of the Tiguan L is 580mm. The wading depth of the Tiguan L is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small vehicles with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Tiguan L is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Based on the passage of preceding vehicles, assess the underwater road conditions and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, or reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
2
5
Share

How much fuel does the Emgrand consume when the air conditioning is on?

When the air conditioning is on, the Emgrand consumes approximately 11 to 11.5 liters of fuel, with the air conditioning increasing fuel consumption by roughly 2 liters. Types of fuel consumption with car air conditioning: One occurs while driving. When the car speed is above 80 km/h, using the air conditioning is more fuel-efficient. Below 80 km/h, or when idling, the air conditioning relies solely on the engine, leading to more noticeable fuel consumption. Tips to reduce fuel consumption when using air conditioning: When the engine has just started and hasn't stabilized yet, turn on the external circulation for at least five minutes and open the windows to expel hot air from the car. Once the engine idle stabilizes, turn on the air conditioning—this saves fuel and avoids harming the engine; adjust the airflow direction. Since cold air sinks and hot air rises, point the vents upward to balance the temperature and cool the car more effectively; alternate between turning the air conditioning on and off. At speeds below 80 km/h, open the windows to reduce air conditioning fuel consumption. However, at speeds above 80 km/h, open windows increase wind resistance, consuming more fuel than using the air conditioning; turn off the air conditioning before shutting down the engine to prevent it from automatically turning on during the next start, which would increase engine load and fuel consumption.
2
3
Share

Reasons for the Malfunctioning Dashboard of Haval H6?

Haval H6 dashboard malfunction is caused by damaged dashboard lighting, short-circuited power supply wires, or blown power supply fuses. Dashboard repair methods: If the dashboard lighting is damaged, disassemble the dashboard. The lighting is usually located at the rear of the dashboard; replace the non-functioning lights. If the dashboard power supply wires are short-circuited, they must be replaced with new wires. If the dashboard power supply fuse is blown, simply replace it with a new fuse. Highlights of the Haval H6 model: The Haval H6 is positioned as an urban SUV, offering both two-wheel drive and four-wheel drive configurations. The H6 is built on a different platform compared to the previous H3 and H5 models. Its most notable feature is the use of a monocoque body. The four-wheel-drive version of the H6 employs an on-demand four-wheel-drive system. While this may somewhat affect off-road performance, it reduces body weight, improves fuel efficiency, and enhances ride comfort. As it is built on an entirely new platform, the two-wheel-drive version of the Haval H6 features front-wheel drive, which differs from the rear-wheel-drive setup of the H3 and H5 two-wheel-drive models.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.