What suspension does the Bestune T33 use?

How to Turn on the Fog Lights of Chery Tiggo 8?

Steps to turn on the fog lights of Chery Tiggo 8: 1. Turn on the parking lights; 2. Locate the fog light symbol on the vehicle's light control lever and rotate the control ring; 3. Align the front fog light symbol with the activation point, at which time the front fog light indicator will appear on the dashboard, indicating that the front fog lights are on; 4. Rotate the control ring again to align the rear fog light symbol with the activation point, and the rear fog light indicator will then appear on the dashboard. The Tiggo 8 is a mid-size SUV under Chery Automobile, featuring a 5-door, 5-seat SUV body structure with dimensions of 4700mm in length, 1860mm in width, and 1746mm in height, and a wheelbase of 2710mm.

10

3

Share

What is the wiper size for the BMW 5 Series?

The wiper size for the BMW 5 Series is: the main wiper blade measures 24 inches (600 mm), and the secondary wiper blade measures 23 inches (575 mm). The wiper blades feature a dedicated connector specifically designed for the BMW 5 Series. The BMW 5 Series is a mid-to-large-sized sedan with a 4-door, 5-seat configuration. Its body dimensions are 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. The BMW 5 Series is equipped with a 4-cylinder, 2.0-liter turbocharged engine delivering 184 horsepower, paired with an 8-speed automatic transmission. The suspension system consists of a double-wishbone independent front suspension and a multi-link independent rear suspension.

3

2

Share

How to Open the Hood of a Levin?

Method to open the hood of a Levin: Below the dashboard on the driver's left side towards the front of the car, there is a release handle. Pulling this handle will cause the hood to pop up approximately 1cm. Then, while holding up the hood with one hand, use the other hand to reach inside from the middle upwards to locate and pull the hood release lever. The Levin is a compact car under the Toyota brand, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm. It is equipped with a 4-cylinder, 1.2T, 116-horsepower turbocharged engine, paired with a simulated 10-speed CVT transmission. The suspension system combines MacPherson strut independent suspension at the front and an E-type multi-link independent suspension at the rear.

4

1

Share

Where is the air conditioning drain hole of the Besturn B50 located?

The air conditioning drain hole of the Besturn B50 is located on the chassis side of the front passenger seat. Generally, if the air conditioner is not dripping water but there is some water inside the cabin, it may be due to excessive dirt causing a blockage in the air conditioning pipes, which requires timely cleaning. Related introduction: 1. Vehicle air conditioning: Used to adjust the temperature and humidity inside the car, providing a comfortable environment for passengers. 2. Composition: It consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. 3. Working process: The refrigerant continuously circulates in the system, with each cycle including four processes: compression process, condensation process, throttling process, and evaporation process.

10

0

Share

Where is SWM Motors produced?

SWM Motors is produced in Chongqing, and its SUV lineup includes models such as the G01, X3, G05, and X7. The SWM G05 is a mid-size SUV under the SWM brand, with body dimensions of 4750mm in length, 1860mm in width, and 1780mm in height, and a wheelbase of 2750mm. The SWM G05 is equipped with two engine options: a 2.0-liter naturally aspirated engine and a 1.5-liter turbocharged engine. The 2.0-liter naturally aspirated engine delivers 143 horsepower and a maximum torque of 190 Nm. This engine features multi-point fuel injection technology and is paired with a 5-speed manual transmission. The 1.5-liter turbocharged engine produces 156 horsepower and a maximum torque of 230 Nm. This engine also utilizes multi-point fuel injection technology and is matched with a 6-speed automatic transmission (6AT).

19

0

Share

What are the reasons for a manual transmission not being able to shift gears?

Reasons for a manual transmission not being able to shift gears: 1. P-gear lock solenoid valve failure. The P-gear solenoid valve prevents the vehicle from accidentally shifting into other gears when starting. The solenoid valve needs to receive a signal from the brake pedal to release. If either of these components fails, it will prevent the gear lever from being pushed out of P-gear into another gear. 2. Internal failure of the gear lever assembly. Wear of the gears inside the gear lever can cause the gear lever to get stuck, making it difficult to pull forward or backward. 3. Incomplete clutch disengagement, caused by failure of the clutch disc or clutch pressure plate. Replacing the clutch three-piece set (friction disc, pressure plate, and release bearing) can resolve this issue. 4. Residual debris in the transmission oil affecting the gear shifting of the manual transmission car.

14

3

Share

What suspension does the Bestune T33 use?

How to Turn on the Fog Lights of Chery Tiggo 8?

What is the wiper size for the BMW 5 Series?

How to Open the Hood of a Levin?

Where is the air conditioning drain hole of the Besturn B50 located?

Where is SWM Motors produced?

What are the reasons for a manual transmission not being able to shift gears?

What to Do If the Car Air Conditioning Refrigerant Leaks?

What is the reason why the Skoda Octavia automatic transmission does not move when shifting gears?

Can On-Demand AWD Be Driven on Snowy and Icy Roads?

What are the causes of abnormal noise in Mercedes-Benz wipers?