What Stickers Should Be Affixed to Car Windows?

2 Answers
ChristopherFitz
08/28/25 2:17am
Car windows should display the compulsory traffic insurance label and the annual vehicle inspection compliance label. The vehicle inspection compliance label and insurance label must be affixed to the upper right corner of the front windshield. Here are the specific details: 1. According to regulations, vehicle license plates must be mounted in designated positions at the front and rear of the vehicle, maintaining clarity and completeness. Heavy-duty and medium-duty trucks along with their trailers, as well as tractors and their trailers, must have enlarged license plate numbers painted on the rear of the body or cargo compartment, with the characters upright and clearly visible. 2. The vehicle inspection compliance label and insurance label should be affixed to the upper right corner of the front windshield. Any spray-painted markings, stickers, or body advertisements on the vehicle must not obstruct safe driving.
Was this review help?
3
3
Share
Javier
09/09/25 7:44am
I've been driving for several years. I remember when I first bought the car, a friend at the DMV told me to always stick the annual inspection sticker and compulsory traffic insurance sticker on the top right corner of the windshield. The annual inspection sticker is proof that the vehicle has passed safety checks, confirming the car meets safety standards. The compulsory insurance sticker indicates that mandatory insurance has been purchased, which covers compensation in case of an accident. Besides these two, some areas also require an environmental protection sticker, but it’s been canceled in my district. When applying the stickers, don’t layer them too thick or use extra stickers, as it may obstruct your view and lead to fines from traffic police. Nowadays, policies have changed, and many stickers have gone digital—just check them on your phone. But I still prefer to stick the annual inspection sticker as a reminder so I don’t forget. Also, avoid placing pet or decorative stickers there—they take up space and might attract unwanted attention from authorities. If new car owners are unsure, they can always check with their local traffic management office. Sticking these labels is about safety and compliance, so don’t take it lightly.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What Causes Brake Noise in Snowy Weather?

Specific reasons for brake noise in snowy weather: 1. Improper installation of brake pads: When installing new brake pads, the old brake discs were not resurfaced, resulting in a poor fit. Improper installation or failing to resurface the old discs before installing new brake pads will cause the new pads to rub directly against the uneven surface of the old discs, ultimately leading to uneven wear on the new brake pads. 2. Brake system malfunction: There may be inherent defects in the brake system itself, causing the brake pads to only partially contact the brake discs. This increases the pressure per unit area on the brakes, resulting in noise. It is recommended to check components such as the calipers and guide pins. 3. Presence of foreign objects: Foreign objects causing a mismatch in the contact surfaces, leading to noise.
11
2
Share

What is the fuel consumption of the Baojun Valli?

The actual measured fuel consumption of the Baojun Valli is 8.2 liters per 100 kilometers. Here are detailed introductions about it: 1. From the perspective of vehicle size: The Valli has body dimensions of 4685×1806×1485mm with a wheelbase of 2700mm. Not only that, the Valli can provide 500L of trunk space, further enhancing its carrying capacity, making travel more comfortable and relaxed. It can be said that it already meets the usage needs of the vast majority of consumers. 2. From the perspective of space size: When the Valli's seats are folded down, the available space becomes 1620L. Official data states its dimensions as 1800mm in length × 1200mm in width × 750mm in height.
16
3
Share

What kind of license is needed to ride a large-displacement motorcycle?

Riding a large-displacement motorcycle requires either an E or D license. There are three types of motorcycle licenses: F, E, and D. An F license only permits riding light motorcycles with engine displacements below 50CC. An E license allows riding any two-wheeled motorcycle regardless of displacement size. A D license permits riding all two-wheeled and three-wheeled motorcycles. Therefore, as long as you have an E license, you can ride any two-wheeled motorcycle—there is no separate license specifically for large-displacement motorcycles. Motorcycles are vehicles powered by gasoline engines, with handlebars to steer the front wheel, and come in two or three wheels. They are lightweight, agile, fast, and widely used for patrolling, passenger and cargo transport, as well as sports equipment. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, touring bikes, etc.
1
1
Share

What Causes an Engine to Stall After Starting?

Reasons for an engine stalling after starting: 1. The vehicle's anti-theft system is triggered, locking the engine; 2. Poor contact of internal contacts in the ignition switch; 3. Low fuel pump pressure, fuel line leakage, insufficient power supply current, or damaged fuel pressure regulator; 4. No proper matching after replacing the engine control unit or anti-theft system components, or damaged wiring. Methods to prevent engine stalling: 1. In winter, pay attention to the direction of the car's front when parking—face it towards a building to block the wind and prevent the engine from getting too cold; 2. When parking at night, position the car's front towards the sunrise direction so that the first rays of morning sun can warm the engine; 3. Regularly visit designated service stations for inspections.
14
4
Share

Why Does Factory Paint Bubble?

Reasons for paint bubbling include: 1. Poor paint quality: This issue often occurs at roadside shops, which typically offer very low prices for paint jobs and use low-quality paints. 2. Unrigorous construction conditions and processes: Paint application requires high standards in terms of conditions and techniques. The surface must be completely free of moisture before painting; the filler (putty) applied during the initial surface preparation must be thoroughly dried in a dry environment before entering the paint booth; the air lines connected to the spray guns must remain completely dry, with no moisture allowed. These factors are significant causes of paint bubbling. 3. Excessive paint thickness: Lack of attention during the painting process or the limited skills of the workers can often result in the paint being applied too thickly, leading to sagging beneath the paint film.
9
1
Share

How to Set One-Touch Window Lift for Volkswagen Sagitar?

Method to set one-touch window lift for Volkswagen Sagitar: Lift the window to the top and hold the switch for 3 seconds, then lower it to the bottom and hold for 3 seconds. Repeat this process three times to complete the setup. The basic principle of one-touch window operation is: Each door is equipped with a reversible DC series-wound motor. By operating the switch, the motor drives a worm gear reducer mounted on its spindle, which then moves the window up and down parallelly through a drum and steel cables. The Sagitar is a compact car under FAW-Volkswagen, with body dimensions of 4753mm in length, 1800mm in width, 1462mm in height, and a wheelbase of 2731mm. In terms of exterior design, the chrome trim added along the lower character line on the side panels connects with the chrome strips on the front and rear bumpers, creating a more fluid visual effect for the vehicle.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.