What standard of engine oil is suitable for the Verna?

3 Answers
FaithAnn
07/30/25 12:13am
Verna is suitable for original factory engine oil. Here are some relevant introductions about the engine oil used for Verna: 1. Beijing Hyundai original factory engine oil: The Hyundai Verna uses Beijing Hyundai original factory engine oil, with the grade of 5W/20 or 5W-30. 2. Under cold weather conditions: In northern regions, it is recommended to use SAE0W20, 5W20, or 5W30 engine oil. Using 0W-20 engine oil can maximize fuel savings. 3. Oil change cycle: In principle, the oil change cycle for fully synthetic oil is definitely longer than that for mineral oil. Generally, the oil change cycle for mineral oil is about 5000 kilometers, while fully synthetic oil can be used for about 7500-10000 kilometers. Whether it is mineral oil or fully synthetic oil, do not exceed one year.
Was this review help?
9
2
Share
OAna
08/16/25 4:21am
For the Verna model, my experience is that it's best to use 5W-30 full synthetic oil. I've been driving for five or six years, and this viscosity makes the car run particularly smoothly, especially with quick starts in winter—no worries about failure to start. It's also suitable for summer use; the 5W indicates good low-temperature fluidity, while the 30 signifies strong high-temperature protection, keeping engine noise low even at high speeds. I usually follow the manual's recommendation and buy API SN or SP grade oil to ensure engine cleanliness and prevent carbon buildup. I always opt for full synthetic oil during oil changes—though it's a bit more expensive, it’s worth it since it can last up to 10,000 kilometers before needing replacement. Using the wrong oil, like 10W-40, might increase fuel consumption or even cause engine overheating, so I make sure to regularly check the oil level at the shop to prevent shortages.
Was this review help?
14
3
Share
Expand All
LeMalachi
08/16/25 4:22am
For the Verna's oil standard, I generally recommend 5W-30, which meets the mainstream API SN level. This ensures smooth engine ignition during cold starts and reduces wear during high-temperature operation. This conclusion comes from years of auto repair experience—using low-quality oil, such as overly viscous types, increases internal friction and shortens engine life. The manual states that either semi-synthetic or full-synthetic oil is acceptable, but full-synthetic is more durable, especially in cold climates. Also, pay attention to the replacement interval; for normal driving, changing every 7,000–8,000 km is safe. I once tried saving money with non-standard oil, only to experience increased fuel consumption—so I advise against taking shortcuts.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

How Often Should Brake Fluid Be Replaced?

Brake fluid should be replaced every 2 years. Brake fluid has certain corrosive properties and strong water absorption. Nowadays, maintenance stations have specialized tools to detect the water content in brake fluid, allowing for a test to determine if replacement is necessary. It is essential to regularly replace brake fluid when it reaches the maintenance interval, and it is recommended to follow the maintenance cycle specified by the manufacturer. Over time, the rubber cups and pistons in the brake pump may wear out, causing the brake fluid to become contaminated. When selecting brake fluid, be cautious as substandard or low-quality brake fluid can corrode the rubber seals in the brake pump and affect braking performance. If the brake fluid is low, it is advisable to purchase the original brake fluid from a specialized repair shop.
15
3
Share

What engine does the Dongfeng Fengshen AX7 use?

Dongfeng Fengshen AX7 uses a total of three engines, which are a 1.6-liter turbocharged engine, a 1.5-liter turbocharged engine, and a 1.4-liter turbocharged engine. The Dongfeng Fengshen AX7 is a compact SUV under the Dongfeng brand, with dimensions of 4645mm in length, 1880mm in width, and 1690mm in height, and a wheelbase of 2715mm. The 1.6-liter turbocharged engine of the Dongfeng Fengshen AX7 delivers 170 horsepower and a maximum torque of 250 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available between 1750 to 4500 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block, paired with a 6-speed automatic transmission.
9
1
Share

What to do if the LED tail light of BMW X3 is not working?

If the LED tail light of BMW X3 is not working, it may be due to a burnt-out LED module. You need to go to a repair shop for maintenance or replace the entire tail light assembly. The LED tail light is an innovative brake light and tail light that uses long-lasting LED light sources. The bulbs are made of diodes, which are brighter than ordinary bulbs and have faster response times. The BMW X3 is a sporty SUV equipped with a B48 2.0T engine, paired with an 8-speed automatic transmission, and comes standard with xDrive all-wheel drive system. Its body dimensions are 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm.
15
1
Share

How Long Does a Car Air Conditioning Compressor Last?

Car air conditioning compressors typically last between 10 to 12 years. The exact replacement interval depends on the compressor's quality and frequency of use. Different vehicle models have compressors of varying quality, and usage frequency also varies across different climate regions and individual driving habits. Air conditioning cooling system malfunctions may be caused by refrigerant issues. There is no fixed schedule for replacing automotive air conditioning refrigerant - when cooling performance declines, check whether refrigerant levels are insufficient. Common causes of car air conditioning cooling system failures include: 1. Insufficient refrigerant; 2. Damaged air conditioning flaps; 3. Excessively dirty condenser; 4. Faulty compressor, throttle valve or expansion valve; 5. Belt aging or excessive wear; 6. Blocked air ducts or excessively dirty air conditioning pipes.
4
0
Share

How to start a Mercedes-Benz E300?

Specific steps to start a Mercedes-Benz E300: 1. Enter the vehicle; 2. Release the electronic parking brake switch; 3. Press the brake pedal all the way down until it cannot be pressed further, to prepare for engine start; 4. Press the car's one-touch start button; 5. All dashboard lights will illuminate, indicating that the Mercedes-Benz E300's engine has successfully started. The front design of the Mercedes-Benz E300 is identical to the imported version, with sharp lines for the split high and low beam headlights, giving an overall youthful and dynamic effect. In terms of body dimensions, the Mercedes-Benz E300 measures 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm, making it a four-door, five-seater sedan.
1
3
Share

What does the exclamation mark on the Roewe i5 dashboard mean?

There are three scenarios when an exclamation mark appears on the Roewe i5 dashboard: 1. A triangle with an exclamation mark in the middle indicates a general fault warning light; 2. A circle with parentheses and an exclamation mark in the middle is the brake system warning light; 3. A horizontal line with parentheses and an exclamation mark in the middle is the tire pressure monitoring warning light. The Roewe i5 is a high-performance internet-connected compact car under the Roewe brand. In terms of power, the Roewe i5 1.5L Linghao upgrade series is equipped with a 1.5L DVVT high-efficiency engine, paired with a CVT high-performance continuously variable transmission. Regarding body dimensions, the Roewe i5 1.5L Linghao upgrade series measures 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm, making it a four-door, five-seater sedan.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.