What speed should a beginner drive at when starting to drive on the road?

1 Answers
QuinnMarie
07/25/25 4:26am
Beginners should drive at a speed of 20 km/h or 40 km/h when starting to drive on the road, but it should be determined based on the speed limit of the road. Below are some precautions for beginners: Maintain a good mindset: Beginners are usually nervous when driving on the road, and people are prone to making wrong judgments when they are very flustered. Therefore, beginners should adjust their mindset before driving. Strictly follow traffic regulations: Following traffic rules is one of the most important precautions for beginners when driving, as it can minimize the probability of traffic accidents. Be cautious when driving at night: When driving at night, beginners should first ensure that the speed is slow. If there are streetlights, using low beams is sufficient. If there are no streetlights and no vehicles ahead, high beams can be used, but they should be switched to low beams when a vehicle approaches. Always be aware of pedestrians and other obstacles on the roadside.
Was this review help?
12
1
Share
More Forum Discussions

Is it possible to coast in neutral (N) gear with an automatic transmission car?

Automatic transmission cars should not be shifted into neutral (N) gear for coasting, as coasting in neutral can cause significant harm to the automatic transmission. The automatic transmission requires lubrication, and when the gear is placed in N while driving, the oil pump cannot supply oil normally for lubrication, which will cause the internal components of the transmission to heat up and result in damage. Effects of coasting in neutral with an automatic transmission car: When the vehicle is moving at high speed, both the engine speed and the output shaft speed of the automatic transmission will be very high. Once the gear is shifted to N, the connection between the engine and the wheels will be lost, and the hydraulic lines inside the automatic transmission will experience insufficient oil pressure, preventing normal lubrication of the transmission. This will lead to an increase in the internal operating temperature of the transmission, increasing friction pressure, and also damaging the friction plates inside the transmission. Over time, the internal components of the transmission will age prematurely, and in severe cases, the transmission may be completely ruined. An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle will automatically select the appropriate gear based on the driving speed and traffic conditions. Automatic transmissions have corresponding gears, and whether manual or automatic, the more gears there are, the more fuel-efficient the vehicle will be. For short stops, such as at a brief traffic light, simply pressing the brake is sufficient. If the stop lasts more than 2 minutes, it is advisable to shift into N gear to protect the transmission and prevent the transmission fluid from overheating.
11
4
Share

What type of license plate is issued for hybrid electric vehicles?

Hybrid electric vehicles can be issued new energy vehicle license plates. New energy vehicle license plates are managed in segments according to different vehicle types, with the letter D representing pure electric vehicles and the letter F representing non-pure electric vehicles. For example, models such as the Corolla, Camry Hybrid, and Accord Hybrid cannot obtain green license plates as they are hybrid electric models. In China, these are only considered energy-saving vehicles and not new energy vehicles, so they cannot enjoy the benefits of new energy vehicle license plates during the registration process. Instead, they can only be issued blue license plates, which are the same as those used for conventional fuel vehicles. New energy vehicles refer to those that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving, resulting in advanced technical principles and featuring new technologies and structures.
9
3
Share

What are the grades on tires?

Tire grades include speed rating and load rating. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions; the load rating is a numerical code corresponding to the maximum load capacity, indicating the maximum weight the tire can bear when properly inflated. Typically, you may see markings like 91V or 85H on the tire model - the numbers 91 and 85 represent the tire's load index (maximum weight capacity), while the letters V and H denote the speed rating (maximum speed capability). The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions.
13
5
Share

What is the standard tire pressure for the new ix35?

The recommended tire pressure for the new ix35 is between 2.3 and 2.5. Additional information: Tire pressure introduction: The standard tire pressure is usually indicated on the inside of the fuel tank cap or on the side of the door. The recommended tire pressure in the vehicle's manual generally refers to cold tires, meaning tire pressure should be checked in the morning before driving. Use a standard gauge to check the tire pressure. Effects of abnormal tire pressure: 1. Reduced friction and adhesion of the tires, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates wear on the central tread pattern, shortening tire lifespan; 4. Causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; 5. Increases the movement of various parts of the tire, leading to excessive rolling and abnormal heat generation.
2
3
Share

What is a Full Body Kit for Sedans?

Full body kit for sedans refers to the external spoilers on a car body, whose main functions are to reduce the reverse airflow generated during driving and increase the downforce of the car, making the vehicle more stable while driving and thereby reducing fuel consumption. Full body kits are generally divided into two major categories: bumper-style and lip-style. The bumper-style kit involves completely removing the original front and rear bumpers and then installing another set of bumpers. The lip-style kit adds a lower lip to the original bumper. Precautions for installing a full body kit: 1. Choose high-quality products; 2. Avoid kits that require the removal of the original car bumper for installation; 3. Installation should be done at experienced modification shops, as these shops have the capability to produce various types of kits and usually offer free repairs for any accidental damage to the kit.
8
0
Share

What is the reason why the car key cannot be pulled out and the engine cannot be turned off?

Car key cannot be pulled out and the engine cannot be turned off because some cars have an ignition protection interlock device. When the car's gear is not in P or N, the engine cannot be turned off, and the key cannot be pulled out. Precautions for using car keys are as follows: 1. Do not place it with electronic devices: Since smart keys use low-intensity radio waves, they may not work properly under magnetic interference. Frequently placing the smart car key together with a mobile phone will inevitably cause the smart car key to malfunction, because the chip in the smart key may sometimes be interfered with by the mobile phone frequency, which may temporarily disable the remote control function of the key. In addition, if the smart key receives high-intensity radio waves, it may excessively consume battery power. Therefore, do not place the smart key near electronic devices, such as TVs or personal computers. 2. Do not throw or drop it randomly: For smart keys, the most feared situation is being dropped from a height, because most smart key shells are relatively sturdy, while the internal circuits have weak impact resistance and are easily damaged under severe collisions. Moreover, if the smart car key gets wet, the internal circuits may burn out, also causing remote control failure. Therefore, if the smart car key gets wet, never shake the key vigorously, as this can easily cause water to flow to other important circuits. Also, do not use the remote control to unlock immediately, as this may cause the circuit board to burn out. The correct approach is to open the key shell, lay it flat, and dry it with a hair dryer, then take it to a repair shop for inspection. Additionally, avoid exposing the smart key to high-temperature direct sunlight environments, such as the dashboard or engine hood.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.