What speed is considered exceeding the 100 km/h speed limit on highways?

2 Answers
OSavannah
07/29/25 5:34am
On highways with a speed limit of 100 km/h, driving at 110 km/h is considered speeding. Below is relevant information about speeding: 1. Definition of speeding: Speeding refers to a driver operating a vehicle at a speed that exceeds the legal or regulatory speed limits. 2. Introduction to illegal speeding: Motor vehicle speeding typically includes speeding behaviors both on highways and on non-highway roads. From the perspective of safe driving practices, exceeding the legally prescribed maximum speed or the speed indicated by speed limit signs during vehicle operation, or failing to reduce speed when required by law, all constitute illegal speeding. Penalties are imposed in accordance with Article 86 of the "Road Traffic Safety Law of the People's Republic of China" Implementation Measures.
Was this review help?
20
3
Share
SanAngela
08/12/25 9:08am
On highways with a speed limit of 100 km/h, driving at 101 km/h or above is considered speeding. Theoretically, any speed exceeding 100 violates traffic regulations, which carries the risk of fines. I remember during driving, traffic police departments emphasize that the threshold for speeding is the speed limit itself. For example, if there are speed cameras on the road, even driving at 100.1 km/h might be recorded as a violation. However, many car owners report that enforcement often allows a buffer—speeds between 102 and 105 km/h usually aren’t penalized, and fines are more likely when exceeding 110 km/h. This varies by region; some highway sections are strictly monitored, and any violation caught on camera results in penalty points and fines. Ultimately, speeding isn’t just about numbers—it’s a safety issue. Driving above the speed limit increases the risk of losing control, especially in rain or on curves where braking distances lengthen. From a safety perspective, I always advise friends to develop the habit of using cruise control, maintaining speeds around 95-100 km/h, to avoid accidents.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How long after car glass installation can you drive?

When replacing the windshield, engineering adhesive is generally used. This adhesive becomes fully effective 24 hours after application, meaning you can drive after 24 hours. Below is additional information: 1. Laminated glass: Currently, 99% of domestic vehicle models use laminated glass for the front windshield. Laminated glass is safety glass; if subjected to external force or stone impact, it will crack but not shatter. Rear windshields and side windows mostly use tempered glass, which shatters into fine particles upon strong impact to minimize harm to occupants. Front and rear windshields are secured to the vehicle body with professional glass adhesive. 2. Precautions: To prevent wind and water leaks, avoid washing the car for three days, and remove the adhesive tape fixing the windshield position after three days. Drive smoothly, avoiding sudden braking and rapid acceleration. Try to avoid excessively bumpy roads to prevent windshield displacement.
4
5
Share

What transmission is used in the MG HS manual version?

The manual transmission used in the MG HS is manufactured by SAIC (Shanghai Automotive Industry Corporation). SAIC Motor Corporation Limited is a leading automotive listed company in China. The MG brand originated in the UK in 1924. The MG HS 1.5T models are equipped with a 7-speed dual-clutch transmission, while the 2.0T models use a 6-speed wet dual-clutch transmission. The 6-speed wet dual-clutch transmission is produced in-house by SAIC. Dual Clutch Transmission (DCT) differs from conventional automatic transmissions - it's based on manual transmission technology while providing automatic operation. In addition to offering the flexibility of manual transmissions and the comfort of automatic transmissions, it also delivers uninterrupted power output. For daily use of the MG HS transmission, please note the following points: Do not delay transmission fluid changes for extended periods. Prolonged use of old transmission fluid can damage internal components like bearings and housings; Avoid prolonged coasting in neutral. While some experienced drivers coast in neutral with manual transmissions, doing so with automatic transmissions can cause overheating and create shocks when re-engaging D gear; Never shift into D/R gear before coming to a complete stop. Some drivers shift directly into reverse while still moving to demonstrate smooth operation, but this severely damages transmission gears and may lead to gear grinding failures over time; Avoid frequent steep hill climbs in D gear. When facing steep inclines, automatic transmissions may overheat under high load or shift prematurely causing power loss. Use manual mode to maintain lower gears or sport mode to protect the transmission; Do not tow long distances. When an automatic transmission vehicle breaks down, use a flatbed tow truck with the vehicle in N gear rather than tow ropes or direct towing.
12
3
Share

Where is the ignition coil fuse located in the Focus?

Focus's ignition coil fuse is located in the fuse box in the engine compartment. The core components of the ignition system are the ignition coil and the switching device. Increasing the energy of the ignition coil enables the spark plug to generate sparks with sufficient energy, which is the basic requirement for the ignition system to adapt to the operation of modern engines. The Focus is a model under Changan Ford, with body dimensions of 4647mm in length, 1810mm in width, and 1468mm in height. In terms of appearance, the Focus adopts a crossover-style body kit, including a new front bumper design, black wheel arches and side skirts, and silver underbody protection. For the wheels, the base model is equipped with 17-inch five-spoke aluminum alloy wheels, while the high-end model features 18-inch five-spoke dual-tone wheels identical to the overseas version, along with LED headlights.
1
0
Share

How to Replace the Battery in a Ford Mondeo Key?

To replace the battery in a Ford Mondeo key, follow these steps: Press and hold the top part of the key and pull upwards firmly to remove the physical key. Then, use the back of a utility knife to slide along the seam of the key to open it. Remove the old battery and replace it with a new one. The Ford Mondeo is a model under Changan Ford, with body dimensions of 4873mm in length, 1852mm in width, and 1470mm in height, and a wheelbase of 2850mm. In terms of exterior design, the Mondeo features redesigned grille, front fog lights, and wheels. The grille has been changed to a mesh pattern, and chrome trim has been added to the taillights to enhance both the premium feel and sporty look, while the rest of the design remains largely unchanged.
15
5
Share

What lights to use on rainy days?

On rainy days, use low beam headlights, front fog lights, and clearance lights. Low beam headlights are designed for close-range illumination, with a wide coverage angle (160 degrees) but short projection distance, and their focus cannot be adjusted. Fog lights are installed at the front and rear of the vehicle. During foggy conditions with low visibility, where the driver's line of sight is limited, these lights can extend the visible distance. Especially, yellow anti-fog lights have strong light penetration, enhancing visibility for both the driver and other traffic participants. Clearance lights serve as warning lights to alert other vehicles. They are located at the front and rear edges of the vehicle. Large trucks also have clearance lights on their roofs and sides. Installed along the top edges of the vehicle, clearance lights indicate both the height and width of the car.
15
1
Share

Is It Meaningful to Get a Driver's License Without Buying a Car?

Whether it is meaningful to get a driver's license without buying a car depends on individual circumstances. Here are some precautions for novice drivers: 1. Speed: As long as you are not on the highway, you can maintain a stable speed of around 60 km/h, which is beneficial for control. 2. Observe the rearview mirrors: The rearview mirrors allow you to monitor the road conditions on both sides and behind the vehicle, especially when changing lanes, reversing, or overtaking, as they play a crucial role. 3. Maintain a safe distance: Following too closely can be dangerous if the car in front brakes or cuts in. Sometimes, excessive tension can cause the steering wheel to turn too sharply, leading to a traffic accident. Therefore, keeping a safe distance from the car in front is essential. If a car cuts in, slow down appropriately to yield. 4. Proper use of lights: Do not turn on the hazard lights randomly. Turn on the position lights at dusk, and fog lights should only be used in foggy conditions with poor visibility.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.