What Spark Plugs Are Best for the Langdong?

1 Answers
BryceLee
07/30/25 10:45am
The best spark plug for the Langdong is the original SILZKR6B10E iridium-platinum model. What are spark plugs made of: Spark plugs mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. What types of spark plugs are there: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode-type spark plugs, seat-type spark plugs, pole-type spark plugs, and surface-gap spark plugs. Spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it's recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
Was this review help?
1
0
Share
More Forum Discussions

What is the normal tire pressure for the Baojun 560?

The normal tire pressure range for the Baojun 560 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Baojun 560's tire pressure monitoring data is displayed on the dashboard's LCD screen. The driver can switch to the tire pressure monitoring system display page by rotating the knob on the dashboard left or right, which will show the air pressure of each tire. The Baojun 560 is equipped with a tire pressure monitoring system that automatically monitors the tire pressure in real-time while driving and alerts the driver to tire leaks or low pressure to ensure driving safety. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, the tire pressure warning light will come on. For sensor damage, the only solution is to replace it with a new part.
19
1
Share

How to Check the Total Mileage on the 10th Generation Accord?

The 10th generation Accord's dashboard features a speedometer on the right and a tachometer on the left. The number before "km" displayed between the speedometer and tachometer indicates the total mileage. Below are the relevant details: 1. The Accord's dashboard is equipped with a maintenance reminder light. When the odometer reaches 9600km-12000km and the ignition is turned on, the maintenance light will illuminate for 2 seconds. If the owner fails to perform maintenance after exceeding 12000km, the maintenance light will flash continuously to remind the owner to service the vehicle promptly. 2. After maintenance, the odometer needs to be reset to zero. Turn on the ignition and press the reset button on the dashboard until the trip meter displays "0". 3. The Accord's dashboard does not have a dedicated maintenance light, but the "MAINTENANCE REQUIRED" indicator on the dashboard serves as a reminder. When the mileage approaches 12000km, this indicator will change from green to yellow. If maintenance is not performed after exceeding 12000km, the indicator will turn from yellow to red.
2
2
Share

Is It Normal to Fail the Subject 2 Test Twice?

Failing the Subject 2 test twice is normal. Below is an introduction to Subject 2: Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. Subject 2 test items for small vehicles C1/C2: Include five mandatory test items—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item, high-speed card collection. Subject 2 test items for large vehicles A1/A2/A3/B1/B2: Include pile test, stopping and starting on a slope, parallel parking, passing a single-plank bridge, curve driving, right-angle turns, passing a width-limited gate, passing continuous obstacles, driving on bumpy roads, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling.
20
1
Share

Can I cancel my appointment on the day of the Subject 2 test?

Subject 2 test appointments cannot be canceled on the same day; you must cancel at least one day in advance at the vehicle management office. Below is relevant information about Subject 2: Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It refers to the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as the S-curve). Some regions may also include a sixth item, such as taking a card on a highway. Teaching aids: Teaching software: Learners can use driver simulation test software on mobile or computer devices to study traffic regulations. Teaching materials: "Safe Driving Starts Here," compiled by the Ministry of Transport of the People's Republic of China. Driving schools may provide learning materials uniformly, or students can purchase them at their own expense.
1
4
Share

Is one bottle of tire repair liquid used at a time?

Tire repair liquid is used one bottle at a time. Below is relevant information about tire repair liquid: Function: The production process of automatic tire repair liquid is simple, easy to use, environmentally friendly, non-toxic, non-corrosive, and non-flammable. The product is affordable and widely accepted, featuring high adhesion and long-term storage capability. With automatic tire repair liquid, no additional tools are needed for tire repair, and inflation and repair can be completed within seconds. If a tire gets punctured while driving, simply inject the automatic tire repair liquid directly into the tire through the valve to achieve the miraculous effects of leak prevention, repair, and automatic inflation. Method: The method involves injecting an appropriate amount of tire repair liquid into the tire through the valve, inflating it to fill the hole, and then continuing to inflate until the rated pressure is reached. The excess tire repair liquid will serve as a preventive measure.
17
2
Share

What is the reason for the ETC tag being invalid?

ETC displaying "Tag Invalid" indicates that the ETC electronic tag is not activated. You need to take the ETC device to an ETC service center or ETC service point for inspection. If the invalidation is not caused by human factors, simply performing a secondary activation of the ETC will allow it to be used. ETC installation process: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly turn on, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If inserting and removing the card twice while the tag is not attached shows "Tag Invalid," this is normal and does not affect activation. Alternatively, you can press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth and open the corresponding mobile app (usually, a download QR code is provided on the electronic tag). Enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.