What sound system does the 10th-generation Civic use?

1 Answers
DiLilah
07/25/25 6:09am
The 10th-generation Civic uses the Honda factory-installed sound system. If you want to upgrade the audio system, pay attention to the host unit's specifications when selecting, particularly the changes in output power relative to impedance variations. The 10th-generation Civic is a compact car with body dimensions of 4517mm in length, 1799mm in width, and 1434mm in height, with a wheelbase of 2700mm. In terms of powertrain, the 10th-generation Civic is equipped with a 1.5T 177-horsepower L4 turbocharged engine, paired with a CVT transmission, delivering a maximum power of 130 kW, a maximum torque of 220 Nm, and a maximum power speed of 6000 rpm.
Was this review help?
12
4
Share
More Forum Discussions

How to Turn on the Heater in a Mercedes-Benz C260?

To turn on the heater in a Mercedes-Benz C260: First, start the vehicle and allow the engine to warm up until the coolant temperature reaches above 60 degrees. Then, turn off the AC button, adjust the airflow and direction to your comfort level, and press the temperature adjustment buttons on both sides of the air conditioning panel upwards to set the temperature to your desired level. The Mercedes-Benz C260 is a mid-size car produced by Beijing Benz, with dimensions of 4704mm in length, 1810mm in width, and 1454mm in height, and a wheelbase of 2840mm. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 135kw, and is paired with a 9-speed automatic transmission.
7
1
Share

How often should an oxygen sensor be replaced?

Oxygen sensors do not have a fixed replacement interval, but it is recommended to replace them for vehicles with over 100,000 kilometers. There are usually two oxygen sensors: the one located in front of the three-way catalytic converter is called the front oxygen sensor, while the rear one is positioned behind it. The front oxygen sensor is used to adjust the mixture concentration, and the rear oxygen sensor monitors the working condition of the three-way catalytic converter. Sensor poisoning is a common and difficult-to-prevent malfunction, especially for vehicles that frequently use leaded gasoline. If the poisoning is mild, cleaning can restore normal operation. However, if lead penetrates the interior and obstructs the diffusion of oxygen ions, rendering the oxygen sensor ineffective, replacement becomes the only option.
16
5
Share

What brand does WM Motor belong to?

WM Motor itself is an automotive brand and is not affiliated with any group. Here is an introduction to WM Motor: 1. WM Motor is an emerging new energy vehicle brand in China, established in early 2015, and is a domestic new energy vehicle product. 2. About 70%-80% of WM Motor's core staff come from the automotive industry, while 20%-30% come from the internet industry, with technology centers located both domestically and internationally. 3. The first pure electric mass-produced SUV launched by WM Motor is the WM EX5, a compact SUV with a very rugged appearance, smooth lines, a high-gloss finish, and strong handling performance.
13
1
Share

What is the emission standard for vehicles in 2013?

2013 diesel vehicles comply with the China III emission standard. The pollutant levels in the exhaust emissions of 2013 diesel vehicles are equivalent to Euro III standards, with the difference being that new vehicles must be equipped with an OBD (On-Board Diagnostics) system. Relevant information about vehicle emission standards is as follows: 1. Introduction: Vehicle emission standards regulate the levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). 2. Implementation: Starting from January 1, 2004, Beijing upgraded the vehicle emission standards from Euro I to Euro II. By 2008, the Euro III standard was officially implemented.
6
2
Share

What are the methods to reset the maintenance light on a Sagitar?

The method to reset the maintenance light on a Volkswagen Sagitar is as follows: 1. Manual reset: There are two buttons on the lower left corner of the combination instrument panel. 2. Press the maintenance button (mileage reset button) while turning the ignition key to the light-on position. After hearing a beep, release the maintenance button and hold for two seconds. 3. Without moving the ignition switch, press and hold the minute button (MIN) next to the instrument panel. If the minute time does not move, the reset is complete. Below are the reasons why the car engine maintenance light may come on: 1. Carbon deposits in the intake tract and piston top can lead to poor atomization, causing incomplete combustion and triggering the pollution light. 2. Faults in the sensor or computer board itself can cause the pollution light to come on.
12
4
Share

How Many Kilometers for Mercedes-Benz First Maintenance?

Mercedes-Benz first maintenance is at 10,000 kilometers. Below are specific details about Mercedes-Benz maintenance: Mercedes-Benz parts maintenance and replacement cycle: 1. New car first oil change is at half a year or 10,000 kilometers. 2. Brake fluid, transmission oil, and filter are at 2 years. 3. Spark plugs are at 20,000 kilometers or 3 years. 4. Air conditioning filter is at 20,000 kilometers or 1 year. 5. Front brake pads are at 50,000 kilometers, front brake discs at 60,000 kilometers, rear brake pads at 60,000 kilometers, rear brake discs at 80,000 kilometers. 6. Battery is at 60,000 kilometers or 4 years.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.