What size tires does the Zotye T500 use?

1 Answers
CollinAnn
07/29/25 4:23pm
Zotye T500 uses three sizes of tires, which are 225/50r18, 215/65r16, and 235/55r17. It is normal for the same model with different configurations to use different specifications of tires. The tire specifications and sizes are marked on the sidewall of the tire. 225/50r18 means the tire width is 225 millimeters, the aspect ratio is 50, r stands for radial tire, and 18 indicates it can be mounted on 18-inch rims. The Zotye T500 is a compact SUV under the Zotye brand. The front of the car features a hexagonal grille, a strongly designed bumper, and a pattern similar to fretwork above the fog lights, giving it a high degree of originality. From the side, the car adopts the popular floating roof design, with a full and rounded rear shape. A rising waistline extends to the rear, complemented by a full-width taillight design that echoes the headlight cluster, enhancing light recognition and driving safety.
Was this review help?
16
1
Share
More Forum Discussions

When Does the Clutch Need to Be Replaced?

The replacement time for the clutch is not strictly defined and depends on the driving conditions of each vehicle. The following details the service life of the clutch: 1. According to the 'Technical Specifications for Automotive Dry Friction Clutch Assembly QCT25-2004', the clutch, as an important component of the transmission system, can last as long as the vehicle under normal usage. 2. After undergoing 1 million separation endurance tests, the main performance parameters of the clutch assembly still remain at 70% to 90% of the original, indicating that the clutch is highly durable. 3. Experimental statistics show that in urban areas in China, the clutch is pressed approximately 9 times per kilometer, while in suburban areas, it is pressed about 3 times per kilometer. If the driving is evenly split between these two conditions, averaging 6 clutch presses per kilometer, the main components of the clutch still perform well even after 160,000 kilometers.
13
5
Share

What are the main causes of transmission overheating?

The causes of transmission overheating mainly include the following five aspects: 1. High engine and coolant temperature, affecting transmission heat dissipation. 2. Clogged radiator grille. 3. Transmission clutch slippage, generating additional heat. 4. Insufficient flow in transmission cooling oil circuit. 5. Thermostat sticking. Below are the inspection points when transmission temperature is too high: (1) Check whether the transmission is low on oil, whether the radiator fan is rotating, and whether there is oil leakage under the vehicle. (2) It is recommended to change the transmission oil. If the transmission oil relies on the radiator for cooling, check whether the radiator is too dirty.
20
1
Share

What is the tire pressure for the VV6?

The normal tire pressure range for the WEY VV6 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. The VV6 is equipped with a tire pressure monitoring system that can monitor tire pressure and temperature in real-time and alert the driver promptly when abnormalities occur, allowing timely action to prevent accidents. By pressing the interface switch button on the steering wheel, the driving display can be switched to the tire pressure monitoring interface to check the tire pressure. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires should be checked and the pressure adjusted. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the monitoring system will still record the previous data, causing the indicator light to remain on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged while driving, the tire pressure warning light will illuminate. In case of sensor damage, the only solution is to replace it with a new one.
10
5
Share

Why is the reversing camera not displaying on the Infiniti QX50?

The reasons why the reversing camera does not display on the Infiniti QX50: 1. When the car is just started, it may interfere with the operation of the reversing camera. You can try restarting the car to see if the issue persists. It could also be electromagnetic interference from other electronic devices in the car. Try turning off the radio or music player and then restarting. 2. The reversing camera's probe may be damaged, or the chip's photosensitive signal may be blocked due to prolonged use. You can remove the camera and connect it to someone else's navigation system to test if the camera is faulty. 3. Poor line contact can cause the reversing radar to work intermittently. Check the connection points between the reversing radar lines and the car's wiring to see if there are any loose connections. 4. If the reversing camera in your car is part of a navigation and reversing camera integrated system, the issue might be due to a damaged navigation card slot, causing the reversing camera function to fail.
18
2
Share

What are the correct steps to use hill start assist?

The correct steps to use hill start assist are as follows: 1. Check that all vehicle parameters are normal and there are no abnormalities in driving. Confirm that the hill start assist function is normally activated. Generally, vehicles do not have a separate hill start assist button (ensure the ESP function is turned on, as the hill start assist function will also deactivate when ESP is turned off). 2. Find a slope with no vehicle traffic and ensure there are no other hazardous factors around. 3. Enter the slope, stop at a point, and there is no need to pull the handbrake—simply press the brake pedal. 4. With your right foot pressing the brake, shift into the forward gear. 5. Release the brake (release it all at once, not slowly), then accelerate to start moving.
5
5
Share

What is the normal operating pressure of a car air conditioner?

Car air conditioning operating pressure is divided into two situations: high pressure and low pressure. The normal pressures are as follows: 1. The normal high pressure of a car air conditioner should be 1.3-1.7MPa (13-17kg/cm2 or 190-250Lbf/in2). 2. The normal low pressure should be between 0.15-0.25MPa (1.5-2.5kg/cm2 or 20-35Lbf/in2). Here is some introduction about the car air conditioning system: (1) The car air conditioning system is a device that cools, heats, ventilates, and purifies the air inside the car. (2) The car air conditioning system can provide a comfortable riding environment for passengers, reduce driver fatigue, and improve driving safety. (3) The air conditioning system has become one of the indicators to measure whether a car is fully equipped.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.