···
Log in / Register

What size tires does the Wuling Rongguang use?

4 Answers
DiZoe
07/29/25 6:22pm

All models are equipped with 175/70R14 tires. Here are the detailed specifications of the Wuling Rongguang: 1. The Wuling Rongguang is powered by two engines: a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. 2. The 1.2L naturally aspirated engine delivers 82 horsepower and a maximum torque of 115 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 3600 to 4000 rpm. It features multi-point fuel injection technology, an aluminum cylinder head, and a cast iron cylinder block, paired with a 5-speed manual transmission. 3. The 1.5L naturally aspirated engine produces 107 horsepower and a maximum torque of 145 Nm. This engine achieves its maximum power at 5400 rpm and its maximum torque between 3600 to 4000 rpm. It also utilizes multi-point fuel injection technology, an aluminum cylinder head, and a cast iron block, mated to a 5-speed manual transmission. 4. The Wuling Rongguang features a MacPherson independent front suspension and a leaf spring rear suspension. The basic model measures 4135 mm in length, 1660 mm in width, 1870 mm in height, with a wheelbase of 2700 mm.

Was this review help?
14
2
Share
McSarah
08/14/25 11:07am

I've been driving my Wuling Rongguang for over three years now, and the original tire size is 185R14LT. It's very stable for hauling goods, and the fuel consumption is also economical for city driving. Fellow car owners often ask about the tire size, so I recommend regularly checking the tire pressure and maintaining it around 2.5 bar—too high or too low can cause uneven wear. Also, pay attention to the tread wear; it's good to rotate and balance the tires every 10,000 kilometers. Domestic brands like Cheng Shin are quite good, offering great value for money. Don’t go for cheap, no-name brands—safety comes first. Choosing the right size also improves handling, making the car more stable at high speeds.

Was this review help?
14
4
Share
Expand All
NatalieLee
10/14/25 5:45am

I'm quite interested in car parts. The Wuling Rong Guang commonly uses 185R14LT or 195/70R15 tires, depending on the model year. The former focuses more on durability and is suitable for hauling goods; the latter is slightly flatter, providing more comfort for city driving. I recommend checking the tire date and cracks, especially during summer, to avoid unexpected blowouts. Investing in a good brand can extend their lifespan by a couple of years—for example, Kumho offers great value for money. With regular maintenance, you can drive with peace of mind.

Was this review help?
8
5
Share
Expand All
SanJameson
11/27/25 6:40am

I've been driving this compact van for ten years. The Wuling Rongguang typically uses 185R14LT tires, which are just the right size. During maintenance, pay extra attention to signs of aging - check tread depth quarterly and replace if it falls below 1.6mm. The factory tires are sturdy, but pairing them with a tire pressure monitoring system is better to ensure proper inflation, making heavy loads easier to handle. For long-term use, opt for wear-resistant tires to extend lifespan and save costs.

Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the Difference Between Comfort Mode and Economy Mode?

The differences between Comfort Mode and Economy Mode mainly lie in the following aspects: 1. Mode Characteristics: Economy Mode offers good balance in all aspects; Comfort Mode is the most fuel-efficient and comfortable. 2. Steering Wheel Responsiveness: In Economy Mode, the steering wheel becomes slightly heavier and less flexible. In Comfort Mode, the steering wheel is more responsive, allowing for one-handed driving. 3. Power Delivery: In Economy Mode, the throttle response is noticeably more sensitive, providing immediate power that is neither too gentle nor too aggressive, making it easier to control. When the throttle is fully engaged, a slight sense of acceleration can be felt. In Comfort Mode, the throttle response is less sensitive, and the power delivery is more gradual. Even when the throttle is deeply pressed in this mode, the sense of acceleration is barely noticeable.
12
5
Share

How to Solve the Power Steering Failure of Buick Verano?

If the power steering system of the Buick Verano fails, the only thing the owner can do is to send the car to a repair shop or 4S store, and then let professionals check and repair the fault. The following is the relevant introduction about Buick Verano: 1. Introduction to Buick Verano: Buick Verano is an intermediate sports sedan under SAIC-GM Buick. As a new generation of global strategic models of Buick, Verano integrates General Motors' global advantages, combining stylish and dynamic appearance, exquisite and comfortable driving space with precise and agile sports performance, bringing a new driving experience for the new generation of elites. 2. Design of Buick Verano: Buick Verano is built based on Buick's latest family design language, equipped with a flying-wing chrome-plated grille, wing-shaped LED automatic induction headlights, wing-shaped LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, fastback roof, etc.
7
2
Share

Where is the OBD interface located on the Ford Mondeo Zhisheng?

Ford Mondeo Zhisheng's OBD interface is located under the driver's seat. There is a storage compartment that can be pulled open to reveal the diagnostic connector inside. The functions of OBD are as follows: 1. The OBD system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it will immediately issue a warning; 2. When a system failure occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault codes can be read from the PCM through a specific procedure; 3. Based on the fault code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault. OBD monitors the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, fuel system, EGR, and other systems and components in real-time.
3
3
Share

What Causes the Clicking Sound When Turning the Steering Wheel While Stationary in a New Car?

Reasons for abnormal sounds when turning the steering wheel while stationary in a new car are as follows: Steering wheel not properly broken in: Abnormal sounds may occur when turning the steering wheel while stationary, which is a normal phenomenon. The noise will disappear after some use, so there is no need to worry in this case. Issues with the shock absorber: If the plane bearing of the shock absorber lacks lubrication, applying some grease can solve the problem. If the noise persists after greasing, replacement is necessary. Lack of lubrication in the steering column: The sound may come from the steering column dust cover, whether driving or turning the steering wheel while stationary, with the noise emanating from below the steering wheel. Simply inspect the steering column dust cover. Applying some grease will resolve this issue.
7
1
Share

How often should the Verna's brake pads be replaced?

The Verna's brake pads should be replaced every 60,000 to 70,000 kilometers. The method for replacing the brake pads is as follows: 1. Open the engine compartment to check the brake fluid level to prevent overflow during the replacement process; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install the new brake pads, tighten the guide bolts, and complete the replacement. Taking the 2020 Verna as an example, it belongs to the compact car category, with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, and a fuel tank capacity of 43 liters. The 2020 Verna is equipped with a 1.4L naturally aspirated engine, with a maximum horsepower of 95PS, a maximum power of 70kW, a maximum torque of 132.4Nm, and is paired with a 5-speed manual transmission.
16
4
Share

Why can't a fully paid vehicle with the original title be transferred?

A fully paid vehicle with the original title, even if it is a legitimate car with normal procedures, still has drawbacks. Since such a car comes with a full payment clearance certificate and the original title, it is generally a released mortgage vehicle, meaning it was transferred as collateral for the original debt. Such vehicles are not under the owner's name, and purchasing them carries the risk of being seized. When purchasing, it is important to pay attention to the source and whether the vehicle has been tampered with. Below is additional information: 1. Source of the mortgage vehicle: When purchasing a mortgage vehicle, you need to know the source of the car. If you buy an illegal mortgage vehicle, it is against the law and carries significant legal responsibilities. 2. Engine inspection: When purchasing a mortgage vehicle, always check if the engine has been tampered with. It is best to have a professional auto repair technician accompany you to inspect the car.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.