What size tires does the Wuling Hongguang S use?

1 Answers
DiTaylor
07/30/25 8:57am
The Wuling Hongguang S uses 14-inch tires with a specification of 170/70R14. The tire size specifications are marked on the sidewall of the tire, where 170 represents a tire width of 170 millimeters, 70 indicates an aspect ratio of 70, R stands for radial tire, and 14 means it can be mounted on 14-inch rims. The Wuling Hongguang S is a crossover product independently developed by SAIC-GM-Wuling based on the Wuling Hongguang model, positioned between commercial vehicles and passenger cars. It is equipped with a variety of safety features, including dual airbags, force-limiting seat belts, rear parking sensors, rear window defrosting, child locks on the middle doors, automatic locking, remote key with electronic anti-theft system, and automatic car-finding function.
Was this review help?
15
5
Share
More Forum Discussions

Where is the child seat interface of Geely Vision X3?

The child seat interface of Geely Vision X3 is located on the rear seats. Geely Vision X3 can install three types of safety seats: 1. Rear-facing infant seat: Follow the instructions provided with the child restraint system to thread or wrap the three-point seat belt through or around the infant (toddler) seat. Insert the latch plate into the buckle, ensuring the seat belt is not twisted. Keep the lap belt tight. Push and pull the child restraint system in different directions to confirm it is securely fixed. 2. Forward-facing child seat: Follow the instructions provided with the child restraint system to thread the lap belt and shoulder belt through or around the child restraint system. Insert the latch plate into the buckle, ensuring the seat belt is not twisted, and tighten the lap belt. Pull the shoulder belt all the way out until it locks. Once the shoulder belt slightly retracts, it cannot be pulled out again. Before allowing the seat belt to retract, ensure it is locked to secure the child restraint system. While pressing the child restraint system firmly against the seat cushion and backrest, fully retract the shoulder belt to tightly secure the child restraint system. 3. Booster seat: Place the child on the child restraint system. Follow the instructions provided with the child restraint system to thread the lap belt and shoulder belt through or around the child. Insert the latch plate into the buckle, ensuring the seat belt is not twisted. Confirm that the shoulder belt is correctly positioned over the child's shoulder and the lap belt is as low as possible on the child's hips.
7
1
Share

What are the differences between the Sagitar 1.2T and 1.4T?

The differences between the Sagitar 1.2T and 1.4T are as follows: 1. Different power: (1) The Sagitar 200TSI-1.2T engine model is EA211-DJN, with a top speed of 200 km/h, an official 0-100 km/h acceleration time of 11.2 seconds, a maximum power of 85 kW, and a maximum torque of 200 Nm. The manual Fashion or Comfort models are equipped with a 5-speed manual transmission, while the DSG Fashion or Comfort models are equipped with a 7-speed dual-clutch transmission. (2) The Sagitar 280TSI-1.4T engine model is EA211-DJS, with a top speed of 220 km/h, an official 0-100 km/h acceleration time of 9.3 seconds, a maximum power of 110 kW, and a maximum torque of 250 Nm. All are DSG models equipped with a 7-speed dual-clutch transmission. 2. Different fuel consumption: The average fuel consumption of the 1.2T with a 7-speed dual-clutch transmission is 7.04 L/100 km, with data provided by 31 owners showing a consumption range of 6.02~8.07 L/100 km. The average fuel consumption of the 1.4T with a 7-speed dual-clutch transmission is 7.29 L/100 km, with 1249 owners reporting a consumption range of 6.32~8.26 L/100 km.
15
1
Share

What is the general speed limit in urban areas?

In urban areas, the general speed limit is 30 kilometers per hour. Speed limits: For roads without a central dividing line, the speed limit is 30 km/h in urban areas and 40 km/h on highways. For roads with only one motor vehicle lane in the same direction, the speed limit is 50 km/h in urban areas and 70 km/h on highways. On urban roads without speed limit signs or markings, the maximum speed should not exceed 70 km/h. Special vehicle conditions: For cargo trucks carrying workers, full trailer trucks, cargo trucks transporting hazardous chemicals, two-wheeled motorcycles, sidecar motorcycles, and articulated buses, the maximum speed limit is 50 km/h when driving in urban areas, and 60 km/h when driving on closed motor vehicle-only roads and highways.
19
3
Share

Why is the car accelerating slowly?

The slow acceleration of a car is related to the valves in the engine or the valve timing, among other factors. Check if the tire pressure meets the standard: Low tire pressure increases the friction between the tires and the ground, which in turn increases resistance. Higher resistance leads to increased fuel consumption, ultimately resulting in insufficient air intake and causing the car to accelerate slowly and lack power. The root cause of slow acceleration is increased fuel consumption: Excessive carbon deposits, prolonged use of the oxygen sensor, and contamination of the intake system can all lead to increased fuel consumption. When these issues occur, they directly affect the engine's cylinder compression ratio, causing insufficient combustion force when the gasoline burns.
12
0
Share

What is the reason for the sudden increase to 4000 RPM when using cruise control downhill?

The reason for the sudden increase to 4000 RPM when using cruise control downhill is that the car's engine speed braking system is in control. Introduction to Cruise Control System: The cruise control system, abbreviated as CCS, is also known as the cruise control device, speed control system, or autonomous driving system. The cruise control system is a system that uses electronic control technology to maintain the car's automatic constant speed. Function of Cruise Control System: The main function is to lock the vehicle's speed according to the driver's needs, allowing the car to maintain a fixed speed without stepping on the accelerator pedal. When driving on highways, the driver can effectively reduce physical fatigue, and the car's constant speed can also save fuel consumption.
18
3
Share

Is it correct to firmly hold the steering wheel and accelerate when driving on muddy roads?

"Firmly holding the steering wheel and accelerating when driving on muddy roads is incorrect operation. Muddy roads are very slippery, and accelerating can cause skidding, so you should slow down to pass. Before entering a muddy road, shift into the required gear early to maintain sufficient power, and try to avoid shifting gears midway. Here are some precautions for driving on muddy roads: use intermittent braking; when encountering a muddy slope, accelerate to climb the slope; and master the steering wheel well. Use intermittent braking: When braking is necessary, use the method of intermittent braking. If braking causes skidding, quickly release the brake pedal and hold the steering wheel firmly to avoid accidents. Pressing or releasing the accelerator pedal should be done slowly, not too quickly, to prevent sudden acceleration or deceleration from causing skidding. When encountering a muddy slope, accelerate to climb the slope: If you encounter a muddy slope, generally accelerate to climb the slope and pass it in one go, avoiding shifting gears or stopping as much as possible. If shifting gears is necessary, find the right moment and use the "gear grabbing" method to shift. Master the steering wheel well: During the journey, master the steering wheel well and try to maintain straight driving. When needing to pull over, first slow down or shift into a low gear in the middle of the road, then gradually move toward the roadside. When turning, slow down early and adjust the required steering angle gently. Do not turn the steering wheel sharply to avoid severe skidding and accidents."
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.