What size tires does the Haval F7x use?

2 Answers
MacAna
07/28/25 8:19pm
Haval F7x uses two sizes of tires, one is 225/55r19, and the other is 225/65r17. The tire is the only part of the car that comes into contact with the ground, and this component is very important for the safety and driving stability of the car. Tires are rubber products, and this component needs to be replaced regularly. Rubber products will age after long-term use. It is recommended that owners replace their tires every four years. The body dimensions of the Haval F7x are 4620 mm in length, 1846 mm in width, and 1660 mm in height, with a wheelbase of 2725 mm. The front suspension type of the Haval F7x is MacPherson independent suspension, the rear suspension type is double-wishbone independent suspension, and the body structure is a load-bearing type.
Was this review help?
11
5
Share
StJason
08/12/25 1:07am
I've been driving the Haval F7x for over two years now, with tire size 225/55 R19, which provides decent stability for city driving. I remember when I first got the car, I specifically checked the manual—the SUV's weight paired with this size offers good traction, especially in rainy conditions where the rear wheels don't slip. Tires require regular maintenance; I check the tire pressure monthly to keep it around 2.4 bar. Tread wear also affects safety, and over time, uneven wear can occur, so it's best to get a wheel alignment every 5,000 km. From another perspective, size impacts fuel consumption—the 225 width is moderate, adding a slight 0.x liters per 100 km on highways, but it's negligible for daily commutes. If you often drive on mountain roads, consider upgrading to more durable AT tires, though the factory tires offer good value for money. In short, don’t just focus on size—proper maintenance is key to extending tire lifespan.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Which Cars Have Three-Way Catalytic Converters?

Three-way catalytic converters are found in Geely vehicles. Below is an introduction to three-way catalytic converters: 1. Introduction to Three-Way Catalytic Converters: A three-way catalytic converter refers to a device that converts harmful gases emitted from vehicle exhaust into harmless gases through oxidation and reduction reactions. 2. Functions of Three-Way Catalytic Converters: (1) Improve fuel atomization performance, enhance combustion efficiency, reduce fuel consumption, and save 5-20% of fuel. (2) Enhance cold-start capability at low temperatures and reduce noise. (3) Improve power performance, extend the service life of the engine and the three-way catalytic converter, and ensure proper vehicle maintenance.
8
2
Share

What is the fuel tank capacity of the Mazda3 Axela?

The fuel tank capacity of the Mazda3 Axela is 51L. Here is more information about the Mazda3 Axela: 1. The 2021 model has dimensions of 4662mm in length, 1797mm in width, and 1445mm in height, with a wheelbase of 2726mm. The sleek body design gives the Mazda3 Axela a harmonious side profile. 2. The new car is equipped with either a 1.5L inline 4-cylinder or a 2.0L inline 4-cylinder spark-ignition naturally aspirated engine, with maximum power outputs of 117 horsepower and 158 horsepower respectively, and peak torques of 148 Nm and 202 Nm respectively. In terms of the transmission system, it is paired with a 6-speed manual or a 6-speed automatic transmission.
20
5
Share

Should the foot always rest on the brake during Subject 2 of the driving test?

During Subject 2 of the driving test, the foot can always rest on the brake, ready to press it at any time. Here is some relevant information about car brakes: 1. Definition: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a moving locomotive, vehicle, or other transportation tools or machinery. The general principle of braking is to fix a wheel or disc on the high-speed shaft of the machine and install a corresponding brake shoe, belt, or disc on the machine base, which generates a braking torque under external force. The braking device, also known as a decelerator, is a mechanical braking device that can slow down the vehicle. 2. Classification: Braking can be divided into emergency braking and daily braking. During emergency braking, be aware of the potential hazard of rear-end collisions from following vehicles.
15
0
Share

Where to Add Coolant for BMW?

BMW adds coolant at the far right side of the engine compartment. Do not open the cooling system when the engine is running at high temperatures, as it may cause scalding due to coolant spraying out. Only use the appropriate coolant, otherwise it may damage the engine. Here are the precautions for adding coolant: 1. Coolant consists of water and coolant additives. Not all additives on the market are suitable for your car. After topping up, make sure to close the antifreeze cap properly. The correct coolant level is crucial for the trouble-free operation of the cooling system. Therefore, the coolant level should be checked regularly. 2. After adding coolant, start the engine and turn on the air conditioning system to check and confirm that the radiator cooling fan is working, in order to inspect for any coolant leaks in the radiator or hoses. When the air conditioning system is turned on immediately after a cold start, the fan should operate. Confirm the fan is running by checking the sound and airflow of the fan.
18
5
Share

Does the Lavida come with one-key start?

Only the luxury version of the Lavida model comes with a one-key start feature. To use it, press the start button twice, and on the third press, step on the brake to start the engine. First press activates the central control. The second press initiates a self-check of all devices. After the self-check is complete, you'll hear a beep, and the third press will start the engine. Below are the pros and cons of one-key start: 1. Automatic door unlocking: When the owner approaches the vehicle within about 3 meters, the door locks will automatically open, disabling the anti-theft system. 2. When the owner leaves the vehicle, the door locks will automatically lock and activate the anti-theft system. 3. When the owner enters the vehicle, simply press the start button to use the vehicle without a key. 4. If the position sensor fails or the ignition matching fails, the ignition switch keyhole will be needed. Generally, lower-grade or basic modifications do not retain the keyhole.
19
0
Share

How to Remove the Interior Rearview Mirror of a Buick Excelle?

Method to remove the interior rearview mirror of a Buick Excelle: Hold the cylindrical part of the rearview mirror and rotate it counterclockwise by 45 degrees to detach. For installation, rotate it clockwise by 90 degrees. Additional information about the rearview mirror is as follows: 1. The rearview mirror is an essential component of a car, serving as the driver's "eyes in the back" and plays a crucial role in safe driving. 2. Adjustment method for the interior rearview mirror: Manual adjustment is done directly. When adjusting, use both hands to apply even force and make slight adjustments. Generally, it can be adjusted in all directions (front, back, left, right), but frequent adjustments should be avoided to prevent the mirror from becoming loose. Some vehicle interior rearview mirrors have a locking mechanism that needs to be released before adjustment. After adjustment, secure the lock to fix the mirror in place. 3. Adjustment method for the exterior rearview mirror: Manual adjustment can be done directly, or there may be a control lever near the inner side of the window that can be pulled to adjust the exterior mirror. Make gentle movements when adjusting the lever. If manually adjusting the exterior mirror directly, press lightly on one side of the mirror and adjust gently without applying excessive force to avoid damaging the mirror.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.