What size tires does the Buick Excelle use

2 Answers
SebastianRose
07/30/25 2:18am
Buick Excelle is equipped with 15-inch wheels across the entire lineup, with only the top trim offering alloy wheels, fitted with Maxxis MECOTRA3 tires in the 185/65R15 specification. Here is more information about the Buick Excelle: 1. Configuration: The Excelle places great emphasis on safety features, with standard equipment including 6 airbags, a power sunroof, rear parking sensors, OnStar all-time online assistant, and in-car 4G LTE Wi-Fi. 2. Powertrain: The Excelle is powered by a 1.3L naturally aspirated engine, paired with either a manual or CVT transmission, delivering a peak torque of 133N·m at 4000rpm and a maximum power of 79kW at 6000rpm.
Was this review help?
4
2
Share
LeZoe
08/15/25 8:23am
I've been driving my Buick Excelle for almost ten years, and the original tires are usually 195/55 R15, a pretty common size. I remember trying other sizes when I first changed tires, but it resulted in higher fuel consumption and unstable handling, so I switched back to the original size. The 195 represents a tread width of 195 millimeters, 55 is the aspect ratio, and R15 means 15-inch rims, designed to balance comfort and grip. It's fuel-efficient and quiet for daily driving, especially over speed bumps with less bumpiness. The tire lifespan is around 50,000 kilometers, and I check the tire pressure every few months, keeping it between 2.4 and 2.6 bar to extend its life. If uneven wear or sidewall bulges are noticed, replace the tires immediately—safety first. I recommend going to a 4S shop or a reliable repair shop to avoid cheap tires that might cause skidding in rainy conditions and lead to accidents.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

How much engine oil should be added to the Mondeo Zhisheng 2.3?

The Mondeo Zhisheng 2.3 requires 4 liters of engine oil. When adding oil, ensure the oil level is between the min and max marks on the dipstick, otherwise it may affect the engine's normal operation. The Mondeo Zhisheng 2.3 has the following dimensions: length 4854mm, width 1886mm, height 1495mm, wheelbase 2850mm, fuel tank capacity 70 liters, trunk capacity 450 liters, and curb weight 1586kg. The front suspension is MacPherson strut independent suspension, and the rear suspension is a multi-link independent setup. It produces a maximum horsepower of 160ps, maximum power of 117kw, maximum torque of 205nm, and is paired with a 6-speed automatic transmission.
1
5
Share

How Often Should Carbon Deposits Be Cleaned?

Carbon deposits should be cleaned every 20,000 to 40,000 kilometers. Excessive carbon buildup can reduce the engine's lifespan. Methods for handling carbon deposits include: 1. Cleaning the throttle body—remove the engine cover, detach the throttle body, clean it with carburetor cleaner, dry it with a cotton cloth, and reinstall it; 2. Cleaning internal engine carbon deposits—add an engine internal cleaner into the oil filler port, let the engine idle for 10 minutes, then replace the oil and oil filter; 3. Cleaning the fuel system, injectors, combustion chamber, spark plugs, throttle valve, intake tract, and intake manifold. The effects of carbon deposits on a vehicle: reduced engine power, severe cases may cause engine knocking, acceleration noise, damage to pistons and crankshafts, and even cylinder scuffing.
1
0
Share

What Are the Types of Manual Transmission Fluid?

Manual transmission fluids come in types such as Dexron, Dexron II, Dexron III, and ATFF. Manual transmission fluid helps keep the gear system clean and lubricates to extend the lifespan of the transmission components. Effects of overfilling manual transmission fluid: 1. Increased internal operating resistance of the transmission, leading to abnormal oil leaks; 2. Agitation of the fluid by rotating components can cause air bubbles; 3. Abnormal oil pressure may lead to air blockages in the control valve's oil drain holes, causing poor drainage; 4. May result in gear shifting shocks. Precautions for changing manual transmission fluid: 1. Choose the appropriate viscosity when changing the fluid to avoid power loss; 2. Do not mix different types of transmission fluids to prevent adverse effects on the vehicle; 3. Avoid using low-quality transmission fluid; 4. Ensure no contaminants are introduced during the fluid change process.
7
2
Share

What Are the Solutions When a Car Battery Dies and the Car Won't Start?

When a car battery dies and the car won't start, the solutions are: 1. Push-starting the car manually; 2. Replacing the car battery; 3. Charging the battery; 4. Using jumper cables, ensuring positive connects to positive and negative to negative; 5. Using another vehicle to tow-start the car. The functions of a car battery include: 1. Providing power to the starting system, ignition system, and electronic fuel injection system when starting the engine; 2. Supplying power to the car's electrical equipment when the engine is off or at low idle; 3. Assisting in power supply when the electrical demand exceeds the alternator's capacity; 4. Stabilizing voltage to protect the car's electronic devices.
2
4
Share

Is Renault a Joint Venture Car?

Renault is a joint venture car, and the types of vehicles it produces include racing cars, compact cars, mid-size cars, recreational vehicles, and large cars. Taking the 2019 Renault City K-ZE as an example, it belongs to the small SUV category, with body dimensions of 3735mm in length, 1579mm in width, and 1484mm in height, a wheelbase of 2423mm, and a curb weight of 921kg. The 2019 Renault City K-ZE features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a permanent magnet electric motor, delivering a maximum power of 33kW and a maximum torque of 125Nm, paired with a single-speed fixed gear ratio transmission.
17
2
Share

Do You Need to Disconnect the Wires When Charging a Car Battery?

You do not need to disconnect the wires when charging a car battery. Disconnecting the positive and negative terminals of the battery may cause partial data loss in the ECU. Steps for charging a car battery without disconnecting it: 1. Connect the positive terminal of the charger to the positive terminal of the battery; 2. Connect the negative terminal of the charger to the negative terminal of the battery to begin charging. Precautions for charging a car battery: 1. In cold weather, check if the electrolyte is frozen before charging. Do not charge a frozen battery as it may cause an explosion; 2. Before charging, check the electrolyte level. Do not charge if the electrolyte is insufficient; 3. During charging, measure the density and voltage of the electrolyte every hour and monitor the temperature.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.